Re: [PATCH v4 7/8] iio: adc: ti-ads1015: replace custom shift macros with FIELD_PREP/GET

[Andy Shevchenko <andriy.shevchenko@intel.com>]

On Thu, Aug 27, 2026 at 10:50:59PM +0530, Archit Anant wrote:
> The driver currently uses custom _SHIFT macros and manual bitwise
> operations to read and write to the configuration register.
> 
> Modernize the bitwise logic by replacing all manual shifts with the
> standard FIELD_PREP() and FIELD_GET() macros from <linux/bitfield.h>.
> This improves readability and prevents potential bitwise errors.
> 
> Remove the now-unused _SHIFT macros from the top of the file.

...

> +	cfg = FIELD_PREP(ADS1015_CFG_MUX_MASK, chan) | FIELD_PREP(ADS1015_CFG_PGA_MASK, pga) |
> +			 FIELD_PREP(ADS1015_CFG_DR_MASK, dr);

Indentation is broken.

...

> +		cfg |= FIELD_PREP(ADS1015_CFG_COMP_QUE_MASK,
> +				  data->thresh_data[chan].comp_queue) |
> +			FIELD_PREP(ADS1015_CFG_COMP_MODE_MASK,
> +				   data->comp_mode);

Same issue here.

...

>  static int ads1015_disable_event_config(struct ads1015_data *data,
>  	const struct iio_chan_spec *chan, int comp_mode)
>  {

	struct regmap *map = data->regmap;

> +	unsigned int val = FIELD_PREP(ADS1015_CFG_COMP_QUE_MASK, ADS1015_CFG_COMP_DISABLE);

Split the assignment.

>  	int ret;

...

> -	ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG,
> -				ADS1015_CFG_COMP_QUE_MASK,
> -				ADS1015_CFG_COMP_DISABLE <<
> -					ADS1015_CFG_COMP_QUE_SHIFT);
> +	ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG, ADS1015_CFG_COMP_QUE_MASK, val);
>  	if (ret)
>  		return ret;

	val = FIELD_PREP(ADS1015_CFG_COMP_QUE_MASK, ADS1015_CFG_COMP_DISABLE);
	ret = regmap_update_bits(map, ADS1015_CFG_REG, ADS1015_CFG_COMP_QUE_MASK, val);

-- 
With Best Regards,
Andy Shevchenko