From: Frank Li <Frank.li@oss.nxp.com>
To: "Rob Herring (Arm)" <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu@tomeuvizoso.net>,
Oded Gabbay <ogabbay@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Thomas Zimmermann <tzimmermann@suse.de>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 09/11] accel: ethosu: Reject unsupported commands
Date: Thu, 27 Aug 2026 17:16:58 -0400 [thread overview]
Message-ID: <apCpSiXe8gdpyjHy@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20260827-ethosu-fixes-v1-9-346f9ea8791c@kernel.org>
On Thu, Aug 27, 2026 at 03:33:08PM -0500, Rob Herring (Arm) wrote:
> The command-stream validator does not model U85 branches, indexed DMA,
> or OFM transposes. A branch can bypass the linear validation state,
> indexed DMA accesses an unchecked index buffer, and a transpose changes
> the feature-map address calculation.
>
> Reject those commands and configurations, as well as the reserved DMA
> stride mode and feature-map formats. Reject command-stream IRQs because
> they can signal job completion before later commands finish.
>
> Fixes: 5a5e9c0228e6 ("accel: Add Arm Ethos-U NPU driver")
> Cc: stable@vger.kernel.org
> Assisted-by: LLM
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> drivers/accel/ethosu/ethosu_device.h | 4 ++++
> drivers/accel/ethosu/ethosu_gem.c | 17 +++++++++++++++++
> 2 files changed, 21 insertions(+)
>
> diff --git a/drivers/accel/ethosu/ethosu_device.h b/drivers/accel/ethosu/ethosu_device.h
> index 1eca8590e68d..c330048dbcca 100644
> --- a/drivers/accel/ethosu/ethosu_device.h
> +++ b/drivers/accel/ethosu/ethosu_device.h
> @@ -86,14 +86,18 @@ struct gen_pool;
> #define PMU_EV_TYPE_CYCLES 0x11
> #define PMU_EV_TYPE_IDLE 0x20
>
> +#define NPU_DMA_REGION_INDEX_MODE BIT(11)
> +
> enum ethosu_cmds {
> NPU_OP_STOP = 0x0,
> + NPU_OP_IRQ = 0x1,
> NPU_OP_CONV = 0x2,
> NPU_OP_DEPTHWISE = 0x3,
> NPU_OP_POOL = 0x5,
> NPU_OP_ELEMENTWISE = 0x6,
> NPU_OP_RESIZE = 0x7, // U85 only
> NPU_OP_DMA_START = 0x10,
> + NPU_OP_BRANCH = 0x4100, // U85 only
> NPU_SET_IFM_PAD_TOP = 0x100,
> NPU_SET_IFM_PAD_LEFT = 0x101,
> NPU_SET_IFM_PAD_RIGHT = 0x102,
> diff --git a/drivers/accel/ethosu/ethosu_gem.c b/drivers/accel/ethosu/ethosu_gem.c
> index 3d1f4121db4f..2aafbfe95a8c 100644
> --- a/drivers/accel/ethosu/ethosu_gem.c
> +++ b/drivers/accel/ethosu/ethosu_gem.c
> @@ -450,6 +450,9 @@ static int ethosu_gem_cmdstream_copy_and_validate(struct drm_device *ddev,
> }
>
> switch (cmd) {
> + case NPU_OP_BRANCH:
> + case NPU_OP_IRQ:
> + return -EINVAL;
> case NPU_OP_STOP:
> if (i != size / 4 - 1)
> return -EINVAL;
> @@ -522,6 +525,8 @@ static int ethosu_gem_cmdstream_copy_and_validate(struct drm_device *ddev,
> st.ifm.depth = param;
> break;
> case NPU_SET_IFM_PRECISION:
> + if (((param >> 6) & 0x3) > 1)
> + return -EINVAL;
> st.ifm.precision = param;
> break;
> case NPU_SET_IFM_BROADCAST:
> @@ -565,6 +570,10 @@ static int ethosu_gem_cmdstream_copy_and_validate(struct drm_device *ddev,
> st.ofm.depth = param;
> break;
> case NPU_SET_OFM_PRECISION:
> + if (((param >> 6) & 0x3) > 1)
> + return -EINVAL;
> + if (!ethosu_is_u65(edev) && (param & GENMASK(13, 11)))
> + return -EINVAL;
> st.ofm.precision = param;
> break;
> case NPU_SET_OFM_REGION:
> @@ -599,6 +608,8 @@ static int ethosu_gem_cmdstream_copy_and_validate(struct drm_device *ddev,
> st.ifm2.broadcast = param;
> break;
> case NPU_SET_IFM2_PRECISION:
> + if (((param >> 6) & 0x3) > 1)
> + return -EINVAL;
> st.ifm2.precision = param;
> break;
> case NPU_SET_IFM2_REGION:
> @@ -673,13 +684,19 @@ static int ethosu_gem_cmdstream_copy_and_validate(struct drm_device *ddev,
> break;
>
> case NPU_SET_DMA0_SRC_REGION:
> + if (param & NPU_DMA_REGION_INDEX_MODE)
> + return -EINVAL;
> if (param & 0x100)
> st.dma.src.region = -1;
> else
> st.dma.src.region = param & 0x7;
> st.dma.mode = (param >> 9) & 0x3;
> + if (st.dma.mode == 3)
> + return -EINVAL;
> break;
> case NPU_SET_DMA0_DST_REGION:
> + if (param & NPU_DMA_REGION_INDEX_MODE)
> + return -EINVAL;
> if (param & 0x100)
> st.dma.dst.region = -1;
> else
>
> --
> 2.53.0
>
next prev parent reply other threads:[~2026-08-27 21:17 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-27 20:32 [PATCH 00/11] accel: ethosu: Another batch of fixes Rob Herring (Arm)
2026-08-27 20:33 ` [PATCH 01/11] accel: ethosu: Fix ethosu_job_open() return value Rob Herring (Arm)
2026-08-27 20:48 ` Frank Li
2026-08-27 20:33 ` [PATCH 02/11] accel: ethosu: Drop IRQF_SHARED flag Rob Herring (Arm)
2026-08-27 20:49 ` Frank Li
2026-08-27 20:33 ` [PATCH 03/11] accel: ethosu: Ensure cmd stream ends with a stop op Rob Herring (Arm)
2026-08-27 20:52 ` Frank Li
2026-08-27 20:33 ` [PATCH 04/11] accel: ethosu: Ensure SRAM size is 0 on mapping failure Rob Herring (Arm)
2026-08-27 20:55 ` Frank Li
2026-08-27 20:33 ` [PATCH 05/11] accel: ethosu: Ensure SRAM region size matches job Rob Herring (Arm)
2026-08-27 20:57 ` Frank Li
2026-08-27 20:33 ` [PATCH 06/11] accel: ethosu: Fix probe error cleanup Rob Herring (Arm)
2026-08-27 21:08 ` Frank Li
2026-08-27 20:33 ` [PATCH 07/11] accel: ethosu: Factor buffer bounds checks Rob Herring (Arm)
2026-08-27 21:10 ` Frank Li
2026-08-27 20:33 ` [PATCH 08/11] accel: ethosu: Validate secondary streams Rob Herring (Arm)
2026-08-27 21:14 ` Frank Li
2026-08-27 20:33 ` [PATCH 09/11] accel: ethosu: Reject unsupported commands Rob Herring (Arm)
2026-08-27 21:16 ` Frank Li [this message]
2026-08-27 20:33 ` [PATCH 10/11] accel: ethosu: Validate all feature map tiles Rob Herring (Arm)
2026-08-27 20:33 ` [PATCH 11/11] accel: ethosu: Validate OFM transpose Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=apCpSiXe8gdpyjHy@lizhi-Precision-Tower-5810 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ogabbay@kernel.org \
--cc=robh@kernel.org \
--cc=tomeu@tomeuvizoso.net \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®