mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Salah Triki <salah.triki@gmail.com>
To: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: "Nuno Sá" <nuno.sa@analog.com>,
	"Michael Hennerich" <Michael.Hennerich@analog.com>,
	"Jonathan Cameron" <jic23@kernel.org>,
	"David Lechner" <dlechner@baylibre.com>,
	"Andy Shevchenko" <andy@kernel.org>,
	linux@analog.com, linux-iio@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3] iio: adc: ad4030: fix invalid oversampling_ratio validation
Date: Mon, 31 Aug 2026 12:01:12 +0100	[thread overview]
Message-ID: <apVe-Gcp6MT8E9Dw@pc> (raw)
In-Reply-To: <aoxbJzV5OQ839gAN@ashevche-desk.local>

Hi Andy,

Sorry for the confusion - my previous v3 email crossed paths with yours.
Regarding is_power_of_2(avg_val): following feedback from David and 
Jonathan, we agreed to keep only the check for non-positive values
(avg_val <= 0) to avoid the invalid ilog2(0) call. Checking for non-powers
of two was dropped to preserve standard IIO attribute rounding behavior.

I will sent v4 addressing all your formatting and style requirements.

Thanks for your patience and thorough review.

Best regards,
Salah Triki

On Mon, Aug 24, 2026 at 05:54:31PM +0300, Andy Shevchenko wrote:
> On Mon, Aug 24, 2026 at 06:10:26AM +0100, Salah Triki wrote:
> > ad4030_set_avg_frame_len() computes avg_log2 = ilog2(avg_val) before
> > validating avg_val. The existing check (avg_val < 0) allows avg_val == 0
> 
> Try to write the sentences straight to the point using plain English,
> Avoid using C language as substitute of plain English.
> 
> > to pass through, resulting in ilog2(0) being called with undefined/garbage
> > behavior.
> > 
> > Reject non-positive values (avg_val <= 0) before computing log2.
> > 
> > This issue was identified with assistance from Claude AI and manually
> > verified against the code.
> 
> > Changes since v1:
> >    - Added note stating the issue was identified with assistance from
> >    Claude AI and verified manually.
> 
> Assisted-by?
> 
> ...
> 
> >  static int ad4030_set_avg_frame_len(struct iio_dev *dev, int avg_val)
> >  {
> >  	struct ad4030_state *st = iio_priv(dev);
> > -	unsigned int avg_log2 = ilog2(avg_val);
> > +	unsigned int avg_log2;
> 
> Have you read my comments to the previous version?
> 
> >  	unsigned int last_avg_idx = ARRAY_SIZE(ad4030_average_modes) - 1;
> >  	int freq_hz;
> >  	int ret;
> >  
> > -	if (avg_val < 0 || avg_val > ad4030_average_modes[last_avg_idx])
> > +	if (avg_val <= 0 || avg_val > ad4030_average_modes[last_avg_idx])
> >  		return -EINVAL;
> 
> Ditto.
> 
> 
> -- 
> With Best Regards,
> Andy Shevchenko
> 
> 

      reply	other threads:[~2026-08-31 11:01 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-24  5:10 Salah Triki
2026-08-24 14:54 ` Andy Shevchenko
2026-08-31 11:01   ` Salah Triki [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=apVe-Gcp6MT8E9Dw@pc \
    --to=salah.triki@gmail.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=andriy.shevchenko@intel.com \
    --cc=andy@kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@analog.com \
    --cc=nuno.sa@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®