mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Yeoreum Yun <yeoreum.yun@arm.com>
To: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-kernel@vger.kernel.org, Andy Lutomirski <luto@kernel.org>,
	Borislav Petkov <bp@alien8.de>, "H. Peter Anvin" <hpa@zytor.com>,
	Ingo Molnar <mingo@redhat.com>,
	Peter Zijlstra <peterz@infradead.org>,
	Thomas Gleixner <tglx@kernel.org>,
	x86@kernel.org, Yeoreum Yun <yeoreum.yun@arm.com>
Subject: Re: [PATCH] x86/mm: Introduce helper for checking direct map 1G page support
Date: Tue, 8 Sep 2026 09:53:33 +0100	[thread overview]
Message-ID: <ap_NDXCWb0shVvzp@e129823.arm.com> (raw)
In-Reply-To: <20260902194718.E1FF3041@davehans-spike.ostc.intel.com>

Hi Dave,

> 
> There is an existing variable (direct_gbpages) that says whether the
> kernel can and should use 1G pages in the direct map. It is driven
> by a bunch of other machinery. At least:
> 
>  1. Hardware support for 1G pages
>  2. Kconfig support for 1G direct mappings
>  3. Kernel command line overrides
> 
> Most code just checks the 'direct_gbpages' variable itself.  But there
> are cases where 1G mappings are compile-time disabled (via
> X86_DIRECT_GBPAGES) and 'direct_gbpages' is always 0. Unfortunately,
> that constraint is invisible to the compiler.
> 
> This opacity has been historically functionally harmless; it only
> leaves a bit of dead code. But, there are plans to tigthen up the
> compile-time checks around folded page table levels. The build will
> break if that dead code appears reachable to the compiler. Making
> the compile-time config visible to the compiler fixes the build.
> 
> Add a helper to replace 'direct_gbpages' checks. Check the Kconfig
> option and base CPU support before looking at the variable.
> 
> This lets the compiler optimize things better, especially
> collapse_pud_page() where most of the function can now be optimized
> out when the PUD level is folded.
> 
> Notes:
> 
> Use boot_cpu_has() instead of cpu_feature_enabled(). There's no
> required/disabled features for 1G pages themselves
> (X86_DIRECT_GBPAGES is for kernel mappings only) and the
> static_cpu_has() infrastructure is just gets in the compiler's way.
> 
> This makes 64-bit build marginally larger (20 bytes in one compile)
> and 32-bit builds less marginally _smaller_ (~700 bytes).
> 
> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
> Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
> Tested-by: Yeoreum Yun <yeoreum.yun@arm.com>
> Link: https://lore.kernel.org/all/20260902-dummy_ptxp3-v3-15-5d8f5b17c25c@arm.com/ [1]
> ---
> 
>  b/arch/x86/include/asm/pgtable.h     |   14 ++++++++++++++
>  b/arch/x86/kernel/cpu/common.c       |    2 +-
>  b/arch/x86/kernel/machine_kexec_64.c |    2 +-
>  b/arch/x86/mm/init.c                 |    2 +-
>  b/arch/x86/mm/pat/set_memory.c       |    4 ++--
>  5 files changed, 19 insertions(+), 5 deletions(-)
> 
> diff -puN arch/x86/include/asm/pgtable.h~direct_gbpages-compiletime arch/x86/include/asm/pgtable.h
> --- a/arch/x86/include/asm/pgtable.h~direct_gbpages-compiletime	2026-09-02 10:08:59.999169372 -0700
> +++ b/arch/x86/include/asm/pgtable.h	2026-09-02 10:09:00.011170394 -0700
> @@ -1163,6 +1163,20 @@ static inline int pgd_none(pgd_t pgd)
>  #ifndef __ASSEMBLER__
>  
>  extern int direct_gbpages;
> +static inline bool direct_gbpages_enabled(void)
> +{
> +	/* Check the direct map config option: */
> +	if (!IS_ENABLED(CONFIG_X86_DIRECT_GBPAGES))
> +		return false;
> +
> +	/* Check the CPU feature: */
> +	if (!boot_cpu_has(X86_FEATURE_GBPAGES))
> +		return false;
> +
> +	/* Check the command-line and early setup variable: */
> +	return direct_gbpages;
> +}
> +
>  void init_mem_mapping(void);
>  void early_alloc_pgt_buf(void);
>  void __init poking_init(void);
> diff -puN arch/x86/mm/init.c~direct_gbpages-compiletime arch/x86/mm/init.c
> --- a/arch/x86/mm/init.c~direct_gbpages-compiletime	2026-09-02 10:09:00.001169542 -0700
> +++ b/arch/x86/mm/init.c	2026-09-02 10:09:00.011170394 -0700
> @@ -251,7 +251,7 @@ static void __init probe_page_size_mask(
>  		__default_kernel_pte_mask &= ~_PAGE_GLOBAL;
>  
>  	/* Enable 1 GB linear kernel mappings if available: */
> -	if (direct_gbpages && boot_cpu_has(X86_FEATURE_GBPAGES)) {
> +	if (direct_gbpages_enabled()) {
>  		printk(KERN_INFO "Using GB pages for direct mapping\n");
>  		page_size_mask |= 1 << PG_LEVEL_1G;
>  	} else {
> diff -puN arch/x86/kernel/cpu/common.c~direct_gbpages-compiletime arch/x86/kernel/cpu/common.c
> --- a/arch/x86/kernel/cpu/common.c~direct_gbpages-compiletime	2026-09-02 10:09:00.003169713 -0700
> +++ b/arch/x86/kernel/cpu/common.c	2026-09-02 10:09:00.012170479 -0700
> @@ -2660,7 +2660,7 @@ void __init arch_cpu_finalize_init(void)
>  		 * Right now we don't do that with gbpages because there seems
>  		 * very little benefit for that case.
>  		 */
> -		if (!direct_gbpages)
> +		if (!direct_gbpages_enabled())
>  			set_memory_4k((unsigned long)__va(0), 1);
>  	} else {
>  		fpu__init_check_bugs();
> diff -puN arch/x86/kernel/machine_kexec_64.c~direct_gbpages-compiletime arch/x86/kernel/machine_kexec_64.c
> --- a/arch/x86/kernel/machine_kexec_64.c~direct_gbpages-compiletime	2026-09-02 10:09:00.004169798 -0700
> +++ b/arch/x86/kernel/machine_kexec_64.c	2026-09-02 10:09:00.012170479 -0700
> @@ -257,7 +257,7 @@ static int init_pgtable(struct kimage *i
>  		info.kernpg_flag |= _PAGE_ENC;
>  	}
>  
> -	if (direct_gbpages)
> +	if (direct_gbpages_enabled())
>  		info.direct_gbpages = true;
>  
>  	for (i = 0; i < nr_pfn_mapped; i++) {
> diff -puN arch/x86/mm/pat/set_memory.c~direct_gbpages-compiletime arch/x86/mm/pat/set_memory.c
> --- a/arch/x86/mm/pat/set_memory.c~direct_gbpages-compiletime	2026-09-02 10:09:00.008170139 -0700
> +++ b/arch/x86/mm/pat/set_memory.c	2026-09-02 10:09:00.013170565 -0700
> @@ -130,7 +130,7 @@ void arch_report_meminfo(struct seq_file
>  	seq_printf(m, "DirectMap4M:    %8lu kB\n",
>  			direct_pages_count[PG_LEVEL_2M] << 12);
>  #endif
> -	if (direct_gbpages)
> +	if (direct_gbpages_enabled())
>  		seq_printf(m, "DirectMap1G:    %8lu kB\n",
>  			direct_pages_count[PG_LEVEL_1G] << 20);
>  }
> @@ -1340,7 +1340,7 @@ static int collapse_pud_page(pud_t *pud,
>  	pmd_t *pmd, first;
>  	int i;
>  
> -	if (!direct_gbpages)
> +	if (!direct_gbpages_enabled())
>  		return 0;
>  
>  	addr &= PUD_MASK;
> _

Sorry for late Dave, But would it be better to include below with your
patch?

diff --git a/arch/x86/mm/pat/set_memory.c b/arch/x86/mm/pat/set_memory.c
index 0ce140e4bca6..1165cb793478 100644
--- a/arch/x86/mm/pat/set_memory.c
+++ b/arch/x86/mm/pat/set_memory.c
@@ -1697,7 +1697,7 @@ static int populate_pud(struct cpa_data *cpa, unsigned long start, p4d_t *p4d,
        /*
         * Map everything starting from the Gb boundary, possibly with 1G pages
         */
-       while (boot_cpu_has(X86_FEATURE_GBPAGES) && end - start >= PUD_SIZE) {
+       while (direct_gbpages_enabled() && end - start >= PUD_SIZE) {
                set_pud(pud, pud_mkhuge(pfn_pud(cpa->pfn,
                                   canon_pgprot(pud_pgprot))));

-- 
Sincerely,
Yeoreum Yun

      parent reply	other threads:[~2026-09-08  8:53 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-02 19:47 Dave Hansen
2026-09-03  0:34 ` Sohil Mehta
2026-09-03 14:05   ` Dave Hansen
2026-09-03 17:52     ` Sohil Mehta
2026-09-08  8:53 ` Yeoreum Yun [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ap_NDXCWb0shVvzp@e129823.arm.com \
    --to=yeoreum.yun@arm.com \
    --cc=bp@alien8.de \
    --cc=dave.hansen@linux.intel.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=mingo@redhat.com \
    --cc=peterz@infradead.org \
    --cc=tglx@kernel.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®