From: Frank Li <Frank.li@oss.nxp.com>
To: Rosen Penev <rosenp@gmail.com>
Cc: dmaengine@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
Frank Li <Frank.Li@kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCHv2] dmaengine: bestcomm: ioremap early
Date: Fri, 4 Sep 2026 10:50:15 -0500 [thread overview]
Message-ID: <aprot0laCjaI3-Cr@SMW015318> (raw)
In-Reply-To: <20260902214612.311207-1-rosenp@gmail.com>
On Wed, Sep 02, 2026 at 02:46:12PM -0700, Rosen Penev wrote:
subject: dmaengine: bestcomm: use devm_platform_get_and_ioremap_resource() to simplify code
> ioremap early as devm_platform_get_and_ioremap_resource() only needs a
> platform_device pointer. Also avoid doing work before alllocating the main
> struct.
needn't this paragraph.
>
> Replace the open-coded resource lookup, request_mem_region, ioremap and
> the manual iounmap/release_mem_region cleanup in probe/remove with the
> managed devm_platform_get_and_ioremap_resource() helper. This removes the
> now-unused error-unmap/release paths and simplifies probing.
>
> This also fixes a resource size mismatch between allocating and freeing
Fix a ...
Frank
> where request_mem_region() and release_mem_region() hopefully use the
> same size but is not guarenteed.
>
> Signed-off-by: Rosen Penev <rosenp@gmail.com>
> ---
> v2: remove Sashiko generated description. Reword description.
> drivers/dma/bestcomm/bestcomm.c | 45 ++++++++-------------------------
> 1 file changed, 10 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/dma/bestcomm/bestcomm.c b/drivers/dma/bestcomm/bestcomm.c
> index 432b43520ddc..44ff4a42376b 100644
> --- a/drivers/dma/bestcomm/bestcomm.c
> +++ b/drivers/dma/bestcomm/bestcomm.c
> @@ -13,7 +13,6 @@
> #include <linux/kernel.h>
> #include <linux/slab.h>
> #include <linux/of.h>
> -#include <linux/of_address.h>
> #include <linux/of_irq.h>
> #include <linux/platform_device.h>
> #include <asm/io.h>
> @@ -365,13 +364,19 @@ bcom_engine_cleanup(void)
> static int mpc52xx_bcom_probe(struct platform_device *op)
> {
> struct device_node *ofn_sram;
> - struct resource res_bcom;
> + struct resource *res_bcom;
> + void __iomem *regs;
>
> int rv;
>
> /* Inform user we're ok so far */
> printk(KERN_INFO "DMA: MPC52xx BestComm driver\n");
>
> + /* Get, reserve & map io */
> + regs = devm_platform_get_and_ioremap_resource(op, 0, &res_bcom);
> + if (IS_ERR(regs))
> + return PTR_ERR(regs);
> +
> /* Get the bestcomm node */
> of_node_get(op->dev.of_node);
>
> @@ -402,35 +407,13 @@ static int mpc52xx_bcom_probe(struct platform_device *op)
> /* Save the node */
> bcom_eng->ofnode = op->dev.of_node;
>
> - /* Get, reserve & map io */
> - if (of_address_to_resource(op->dev.of_node, 0, &res_bcom)) {
> - printk(KERN_ERR DRIVER_NAME ": "
> - "Can't get resource\n");
> - rv = -EINVAL;
> - goto error_sramclean;
> - }
> -
> - if (!request_mem_region(res_bcom.start, resource_size(&res_bcom),
> - DRIVER_NAME)) {
> - printk(KERN_ERR DRIVER_NAME ": "
> - "Can't request registers region\n");
> - rv = -EBUSY;
> - goto error_sramclean;
> - }
> -
> - bcom_eng->regs_base = res_bcom.start;
> - bcom_eng->regs = ioremap(res_bcom.start, sizeof(struct mpc52xx_sdma));
> - if (!bcom_eng->regs) {
> - printk(KERN_ERR DRIVER_NAME ": "
> - "Can't map registers\n");
> - rv = -ENOMEM;
> - goto error_release;
> - }
> + bcom_eng->regs = regs;
> + bcom_eng->regs_base = res_bcom->start;
>
> /* Now, do the real init */
> rv = bcom_engine_init();
> if (rv)
> - goto error_unmap;
> + goto error_sramclean;
>
> /* Done ! */
> printk(KERN_INFO "DMA: MPC52xx BestComm engine @%08lx ok !\n",
> @@ -439,10 +422,6 @@ static int mpc52xx_bcom_probe(struct platform_device *op)
> return 0;
>
> /* Error path */
> -error_unmap:
> - iounmap(bcom_eng->regs);
> -error_release:
> - release_mem_region(res_bcom.start, sizeof(struct mpc52xx_sdma));
> error_sramclean:
> kfree(bcom_eng);
> bcom_sram_cleanup();
> @@ -463,10 +442,6 @@ static void mpc52xx_bcom_remove(struct platform_device *op)
> /* Cleanup SRAM */
> bcom_sram_cleanup();
>
> - /* Release regs */
> - iounmap(bcom_eng->regs);
> - release_mem_region(bcom_eng->regs_base, sizeof(struct mpc52xx_sdma));
> -
> /* Release the node */
> of_node_put(bcom_eng->ofnode);
>
> --
> 2.55.0
>
prev parent reply other threads:[~2026-09-04 15:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-02 21:46 Rosen Penev
2026-09-04 15:50 ` Frank Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aprot0laCjaI3-Cr@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rosenp@gmail.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®