From: Nick Huang <sef1548@gmail.com>
To: Hemanth Selam <hemanth.selam@gmail.com>
Cc: "Lee Jones" <lee@kernel.org>,
"Support Opensource" <support.opensource@diasemi.com>,
"Matti Vaittinen" <mazziesaccount@gmail.com>,
"André Draszik" <andre.draszik@linaro.org>,
linux-kernel@vger.kernel.org, mfd@lists.linux.dev,
linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH] mfd: fix typos in comments
Date: Sat, 5 Sep 2026 12:09:21 +0000 [thread overview]
Message-ID: <apwGcRLAYLPKFuZK@nickhuang> (raw)
In-Reply-To: <20260904122834.33723-1-hemanth.selam@gmail.com>
On Fri, Sep 04, 2026 at 05:58:28PM +0530, Hemanth Selam wrote:
> Fix typos in comments, reported by scripts/checkpatch.pl using the
> misspelling list in scripts/spelling.txt. Only touches comments, no code
> changes.
>
> Assisted-by: Cursor:claude-opus-5
> Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
> ---
> drivers/mfd/88pm800.c | 2 +-
> drivers/mfd/kempld-core.c | 2 +-
> drivers/mfd/max8998.c | 2 +-
> drivers/mfd/rave-sp.c | 6 +++---
> drivers/mfd/si476x-i2c.c | 2 +-
> include/linux/mfd/da9063/registers.h | 2 +-
> include/linux/mfd/db8500-prcmu.h | 32 ++++++++++++++--------------
> include/linux/mfd/lp8788.h | 2 +-
> include/linux/mfd/max8998.h | 2 +-
> include/linux/mfd/palmas.h | 2 +-
> include/linux/mfd/rohm-bd71828.h | 2 +-
> include/linux/mfd/samsung/core.h | 2 +-
> include/linux/mfd/si476x-core.h | 2 +-
> include/linux/mfd/twl.h | 2 +-
> 14 files changed, 31 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
> index e9941da58b18..aac630322b3c 100644
> --- a/drivers/mfd/88pm800.c
> +++ b/drivers/mfd/88pm800.c
> @@ -275,7 +275,7 @@ static int device_gpadc_init(struct pm80x_chip *chip,
> goto out;
>
> /*
> - * the defult of PM800 is GPADC operates at 100Ks/s rate
> + * the default of PM800 is GPADC operates at 100Ks/s rate
> * and Number of GPADC slots with active current bias prior
> * to GPADC sampling = 1 slot for all GPADCs set for
> * Temprature mesurmants
> diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
> index b64729918dfd..47062f876e5d 100644
> --- a/drivers/mfd/kempld-core.c
> +++ b/drivers/mfd/kempld-core.c
> @@ -37,7 +37,7 @@ static void kempld_get_hardware_mutex(struct kempld_device_data *pld)
>
> static void kempld_release_hardware_mutex(struct kempld_device_data *pld)
> {
> - /* The harware mutex is released when 1 is written to the mutex bit. */
> + /* The hardware mutex is released when 1 is written to the mutex bit. */
> iowrite8(KEMPLD_MUTEX_KEY, pld->io_index);
> }
>
> diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c
> index eb13bbaeda55..5032eab05bb4 100644
> --- a/drivers/mfd/max8998.c
> +++ b/drivers/mfd/max8998.c
> @@ -146,7 +146,7 @@ static struct max8998_platform_data *max8998_i2c_parse_dt_pdata(
>
> /*
> * ToDo: the 'wakeup' member in the platform data is more of a linux
> - * specfic information. Hence, there is no binding for that yet and
> + * specific information. Hence, there is no binding for that yet and
> * not parsed here.
> */
> return pd;
> diff --git a/drivers/mfd/rave-sp.c b/drivers/mfd/rave-sp.c
> index 05d26d92df03..53c57bafea8f 100644
> --- a/drivers/mfd/rave-sp.c
> +++ b/drivers/mfd/rave-sp.c
> @@ -331,7 +331,7 @@ static u8 rave_sp_reply_code(u8 command)
> return command + 0x20;
> case 0xE0 ... 0xEF:
> /*
> - * Events emitted by all versions of the firmare use
> + * Events emitted by all versions of the firmware use
> * least significant bit to get an ACK code
> */
> return command | 0x01;
> @@ -544,7 +544,7 @@ static size_t rave_sp_receive_buf(struct serdev_device *serdev,
> * NOTE: The above means that only the
> * frame started by third SOF, sent
> * after this one will have a chance
> - * to get throught.
> + * to get through.
> */
> goto reset_framer;
> case RAVE_SP_DLE:
> @@ -595,7 +595,7 @@ static size_t rave_sp_receive_buf(struct serdev_device *serdev,
>
> /*
> * The only way to get out of the above loop and end up here
> - * is throught consuming all of the supplied data, so here we
> + * is through consuming all of the supplied data, so here we
> * report that we processed it all.
> */
> return size;
> diff --git a/drivers/mfd/si476x-i2c.c b/drivers/mfd/si476x-i2c.c
> index 9bce720a0a08..6351aef2d3bb 100644
> --- a/drivers/mfd/si476x-i2c.c
> +++ b/drivers/mfd/si476x-i2c.c
> @@ -222,7 +222,7 @@ int si476x_core_stop(struct si476x_core *core, bool soft)
> atomic_set(&core->is_alive, 0);
>
> if (soft) {
> - /* TODO: This probably shoud be a configurable option,
> + /* TODO: This probably should be a configurable option,
> * so it is possible to have the chips keep their
> * oscillators running
> */
> diff --git a/include/linux/mfd/da9063/registers.h b/include/linux/mfd/da9063/registers.h
> index 7b8364bd08a0..376c5d330599 100644
> --- a/include/linux/mfd/da9063/registers.h
> +++ b/include/linux/mfd/da9063/registers.h
> @@ -14,7 +14,7 @@
> #define DA9063_I2C_PAGE_SEL_SHIFT 1
> #define DA9063_EVENT_REG_NUM 4
>
> -/* Page selection I2C or SPI always in the begining of any page. */
> +/* Page selection I2C or SPI always in the beginning of any page. */
> /* Page 0 : I2C access 0x000 - 0x0FF SPI access 0x000 - 0x07F */
> /* Page 1 : SPI access 0x080 - 0x0FF */
> /* Page 2 : I2C access 0x100 - 0x1FF SPI access 0x100 - 0x17F */
> diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
> index c939c9a1170a..87a28c4f1d81 100644
> --- a/include/linux/mfd/db8500-prcmu.h
> +++ b/include/linux/mfd/db8500-prcmu.h
> @@ -337,31 +337,31 @@ enum sia_mmdsp_stat {
> * @SYSCLKOK_ERR: The SYSCLK is not available in the given time
> * @BOOT_ERR: Romcode has not validated the XP70 self reset in the given time
> * @ROMCODESAVECONTEXT: The Romcode didn.t correctly save it secure context
> - * @VARMHIGHSPEEDVALTO_ERR: The ARM high speed supply value transfered
> + * @VARMHIGHSPEEDVALTO_ERR: The ARM high speed supply value transferred
> * through I2C has not been correctly executed in the given time
> - * @VARMHIGHSPEEDACCESS_ERR: The command value of VarmHighSpeedVal transfered
> + * @VARMHIGHSPEEDACCESS_ERR: The command value of VarmHighSpeedVal transferred
> * through I2C has not been correctly executed in the given time
> - * @VARMLOWSPEEDVALTO_ERR:The ARM low speed supply value transfered through
> + * @VARMLOWSPEEDVALTO_ERR:The ARM low speed supply value transferred through
> * I2C has not been correctly executed in the given time
> - * @VARMLOWSPEEDACCESS_ERR: The command value of VarmLowSpeedVal transfered
> + * @VARMLOWSPEEDACCESS_ERR: The command value of VarmLowSpeedVal transferred
> * through I2C has not been correctly executed in the given time
> - * @VARMRETENTIONVALTO_ERR: The ARM retention supply value transfered through
> + * @VARMRETENTIONVALTO_ERR: The ARM retention supply value transferred through
> * I2C has not been correctly executed in the given time
> - * @VARMRETENTIONACCESS_ERR: The command value of VarmRetentionVal transfered
> + * @VARMRETENTIONACCESS_ERR: The command value of VarmRetentionVal transferred
> * through I2C has not been correctly executed in the given time
> - * @VAPEHIGHSPEEDVALTO_ERR: The APE highspeed supply value transfered through
> + * @VAPEHIGHSPEEDVALTO_ERR: The APE highspeed supply value transferred through
> * I2C has not been correctly executed in the given time
> - * @VSAFEHPVALTO_ERR: The SAFE high power supply value transfered through I2C
> + * @VSAFEHPVALTO_ERR: The SAFE high power supply value transferred through I2C
> * has not been correctly executed in the given time
> - * @VMODSEL1VALTO_ERR: The MODEM sel1 supply value transfered through I2C has
> + * @VMODSEL1VALTO_ERR: The MODEM sel1 supply value transferred through I2C has
> * not been correctly executed in the given time
> - * @VMODSEL2VALTO_ERR: The MODEM sel2 supply value transfered through I2C has
> + * @VMODSEL2VALTO_ERR: The MODEM sel2 supply value transferred through I2C has
> * not been correctly executed in the given time
> - * @VARMOFFACCESS_ERR: The command value of Varm ON/OFF transfered through
> + * @VARMOFFACCESS_ERR: The command value of Varm ON/OFF transferred through
> * I2C has not been correctly executed in the given time
> - * @VAPEOFFACCESS_ERR: The command value of Vape ON/OFF transfered through
> + * @VAPEOFFACCESS_ERR: The command value of Vape ON/OFF transferred through
> * I2C has not been correctly executed in the given time
> - * @VARMRETACCES_ERR: The command value of Varm retention ON/OFF transfered
> + * @VARMRETACCES_ERR: The command value of Varm retention ON/OFF transferred
> * through I2C has not been correctly executed in the given time
> * @CURAPPWRSTISNOTBOOT:Generated when Arm want to do power state transition
> * ApBoot to ApExecute but the power current state is not Apboot
> @@ -376,11 +376,11 @@ enum sia_mmdsp_stat {
> * been correctly executed in the given time
> * @ARMREGU2VALTO_ERR: The ArmRegu2 value transferred through I2C has not
> * been correctly executed in the given time
> - * @VAPEREGUVALTO_ERR: The VApeRegu value transfered through I2C has not
> + * @VAPEREGUVALTO_ERR: The VApeRegu value transferred through I2C has not
> * been correctly executed in the given time
> - * @VSMPS3REGUVALTO_ERR: The VSmps3Regu value transfered through I2C has not
> + * @VSMPS3REGUVALTO_ERR: The VSmps3Regu value transferred through I2C has not
> * been correctly executed in the given time
> - * @VMODREGUVALTO_ERR: The VModemRegu value transfered through I2C has not
> + * @VMODREGUVALTO_ERR: The VModemRegu value transferred through I2C has not
> * been correctly executed in the given time
> */
> enum mbox_to_arm_err {
> diff --git a/include/linux/mfd/lp8788.h b/include/linux/mfd/lp8788.h
> index fd17bec2a33e..e8c50bd38a8a 100644
> --- a/include/linux/mfd/lp8788.h
> +++ b/include/linux/mfd/lp8788.h
> @@ -34,7 +34,7 @@
> #define LP8788_ALM_IRQ "ALARM_IRQ"
>
> enum lp8788_int_id {
> - /* interrup register 1 : Addr 00h */
> + /* interrupt register 1 : Addr 00h */
> LP8788_INT_TSDL,
> LP8788_INT_TSDH,
> LP8788_INT_UVLO,
> diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h
> index 5473f1983e31..ad2ad24412fb 100644
> --- a/include/linux/mfd/max8998.h
> +++ b/include/linux/mfd/max8998.h
> @@ -45,7 +45,7 @@ enum {
> /**
> * max8998_regulator_data - regulator data
> * @id: regulator id
> - * @initdata: regulator init data (contraints, supplies, ...)
> + * @initdata: regulator init data (constraints, supplies, ...)
> * @reg_node: DT node of regulator (unused on non-DT platforms)
> */
> struct max8998_regulator_data {
> diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
> index dabcc0dea802..1d872363820a 100644
> --- a/include/linux/mfd/palmas.h
> +++ b/include/linux/mfd/palmas.h
> @@ -251,7 +251,7 @@ enum tps65917_regulators {
> TPS65917_NUM_REGS,
> };
>
> -/* External controll signal name */
> +/* External control signal name */
> enum {
> PALMAS_EXT_CONTROL_ENABLE1 = 0x1,
> PALMAS_EXT_CONTROL_ENABLE2 = 0x2,
> diff --git a/include/linux/mfd/rohm-bd71828.h b/include/linux/mfd/rohm-bd71828.h
> index 39fe275a8117..ea9b1a8f495f 100644
> --- a/include/linux/mfd/rohm-bd71828.h
> +++ b/include/linux/mfd/rohm-bd71828.h
> @@ -186,7 +186,7 @@ enum {
> #define BD71828_REG_RTC_ALM2 0x63
> #define BD71828_REG_RTC_START BD71828_REG_RTC_SEC
>
> -/* Charger/Battey */
> +/* Charger/Battery */
> #define BD71828_REG_CHG_STATE 0x65
> #define BD71828_REG_CHG_FULL 0xd2
> #define BD71828_REG_CHG_EN 0x6F
> diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
> index 6191f409de94..e489ca0d55ed 100644
> --- a/include/linux/mfd/samsung/core.h
> +++ b/include/linux/mfd/samsung/core.h
> @@ -106,7 +106,7 @@ struct sec_platform_data {
> /**
> * sec_regulator_data - regulator data
> * @id: regulator id
> - * @initdata: regulator init data (contraints, supplies, ...)
> + * @initdata: regulator init data (constraints, supplies, ...)
> */
> struct sec_regulator_data {
> int id;
> diff --git a/include/linux/mfd/si476x-core.h b/include/linux/mfd/si476x-core.h
> index d9e3a322134c..40866d7162c9 100644
> --- a/include/linux/mfd/si476x-core.h
> +++ b/include/linux/mfd/si476x-core.h
> @@ -97,7 +97,7 @@ enum si476x_power_state {
> * @command: Wait queue for wainting on the command comapletion.
> * @cts: Clear To Send flag set upon receiving first status with CTS
> * set.
> - * @tuning: Wait queue used for wainting for tune/seek comand
> + * @tuning: Wait queue used for wainting for tune/seek command
> * completion.
> * @stc: Similar to @cts, but for the STC bit of the status value.
> * @power_up_parameters: Parameters used as argument for POWER_UP
> diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h
> index b31e07fa4d51..238d9dcefc35 100644
> --- a/include/linux/mfd/twl.h
> +++ b/include/linux/mfd/twl.h
> @@ -739,7 +739,7 @@ int twl4030_sih_setup(struct device *dev, int module, int irq_base);
> #define TWL4030_REG_VUSB3V1 19
>
> /* TWL6030 SMPS/LDO's */
> -/* EXTERNAL dc-to-dc buck convertor controllable via SR */
> +/* EXTERNAL dc-to-dc buck converter controllable via SR */
> #define TWL6030_REG_VDD1 30
> #define TWL6030_REG_VDD2 31
> #define TWL6030_REG_VDD3 32
> --
> 2.48.1
>
Hi Hemanth
LGTM
Acked-by: Nick Huang <sef1548@gmail.com>
prev parent reply other threads:[~2026-09-05 12:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-04 12:28 Hemanth Selam
2026-09-05 10:55 ` Matti Vaittinen
2026-09-05 12:05 ` Botsz HUANG
2026-09-05 12:09 ` Nick Huang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=apwGcRLAYLPKFuZK@nickhuang \
--to=sef1548@gmail.com \
--cc=andre.draszik@linaro.org \
--cc=hemanth.selam@gmail.com \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mazziesaccount@gmail.com \
--cc=mfd@lists.linux.dev \
--cc=support.opensource@diasemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®