Re: [PATCH v1 3/5] dt-bindings: dma: Add CIX Sky1 DMA-350 integration

[Conor Dooley <conor@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 1481 bytes --]

On Wed, Sep 09, 2026 at 02:05:12PM +0800, Jelly Jia wrote:
> Hi Conor,
> 
> Thanks for the review.
> 
> > I cannot really speak to whether this is a correct thing to do with a
> > dma-350, but it seems to me like something that should be resolved with
> > a device specific comaptible in the dma-350 node. Someone more familar
> > with the IP will have to comment on that.
> 
> The wrapper is there to keep the platform integration bits (clocks,
> resets, interrupt routing) out of the generic driver: the arm-dma-350
> child stays plain so the existing driver binds to it unchanged. I don't
> know whether other dma350 integrations need the same resources, so I
> did not want to push them into the generic node.

Don't worry about this, given the limited extent of the wrapper driver,
at worst you will end up with a different probe function. The specific
compatible that you'll use will prevent the code relating to these
resources running on other platforms.

Thanks,
Conor.

> 
> > However I would like to know how this impacts the existing dma-350 in he
> > sky1 devicetree.
> 
> Patch 5 converts the existing FCH node to this form: the register window
> and the eight GIC interrupts are unchanged, the arm-dma-350 controller
> becomes the dma-controller@0 child, and the SCMI clock feeding the
> instance is added. The AUDSS instance is new. I'll describe this
> conversion in the patch 5 commit message in v2.
> 
> Best regards,
> Jelly

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]