Hi,

On Fri, Aug 21, 2026 at 05:39:49PM +0200, Daniel Lezcano wrote:
> The documentation for the input current and voltage limits recommends
> using those properties for problems that can be solved using a power
> limit. This contradicts the recommendation to prefer input_power_limit
> for such cases.
> 
> Similarly, the input_power_limit documentation recommends using the
> current or voltage limits for problems that can be solved with a power
> limit, which conveys the opposite of the intended meaning.
> 
> Fix the wording to clarify that input_power_limit should be preferred
> whenever a power limit can address the problem, while current or
> voltage limits should be used when it cannot.

Patch LGTM.

> Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>

Is this intentional?

Greetings,

-- Sebastian

> ---
>  Documentation/ABI/testing/sysfs-class-power | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power
> index 32697b926cc8..f0ef87d365dd 100644
> --- a/Documentation/ABI/testing/sysfs-class-power
> +++ b/Documentation/ABI/testing/sysfs-class-power
> @@ -600,8 +600,8 @@ Description:
>  		supply. Normally this is configured based on the type of
>  		connection made (e.g. A configured SDP should output a maximum
>  		of 500mA so the input current limit is set to the same value).
> -		Use preferably input_power_limit, and for problems that can be
> -		solved using power limit use input_current_limit.
> +		Use preferably input_power_limit, and for problems that can not
> +		be solved using power limit use input_current_limit.
>  
>  		Access: Read, Write
>  
> @@ -618,8 +618,8 @@ Description:
>  		input power to 5V when the screen is on to meet Google's skin
>  		temperature targets). Note that this feature should not be
>  		used for safety critical things.
> -		Use preferably input_power_limit, and for problems that can be
> -		solved using power limit use input_voltage_limit.
> +		Use preferably input_power_limit, and for problems that can not
> +		be solved using power limit use input_voltage_limit.
>  
>  		Access: Read, Write
>  
> @@ -633,7 +633,7 @@ Description:
>  		in the supply. Normally this is configured based on
>  		system-level knowledge or user input. Use preferably this
>  		feature to limit the incoming power and use current/voltage
> -		limit only for problems that can be solved using power limit.
> +		limit only for problems that can not be solved using power limit.
>  
>  		Access: Read, Write
>  
> -- 
> 2.43.0
>