From: Frank Li <Frank.li@oss.nxp.com>
To: Rosen Penev <rosenp@gmail.com>
Cc: dmaengine@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
Frank Li <Frank.Li@kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] dmaengine: ppc4xx: convert irq_of_parse_and_map to platform_get_irq
Date: Fri, 11 Sep 2026 11:03:13 -0500 [thread overview]
Message-ID: <aqQmQVdc33D1sOqf@SMW015318> (raw)
In-Reply-To: <20260910212720.70721-1-rosenp@gmail.com>
On Thu, Sep 10, 2026 at 02:27:20PM -0700, Rosen Penev wrote:
subject: function need ().
> Replace irq_of_parse_and_map() with platform_get_irq(), which is the
> preferred way to obtain IRQ resources from platform devices. This
> eliminates the corresponding irq_dispose_mapping() calls
> since the
> framework manages the mapping.
Needn't this
>
> While here, fix a latent bug in the err_req2 error path: the error IRQ
remove "While here", just Fix ...
> was not freed when a subsequent step (I2O setup) failed.
>
> The struct device_node *np declaration is moved to the scope where
> it is still needed (I2O register lookup).
>
> Assisted-by: opencode:big-pickle
> Signed-off-by: Rosen Penev <rosenp@gmail.com>
> ---
> drivers/dma/ppc4xx/adma.c | 28 +++++++++++-----------------
> 1 file changed, 11 insertions(+), 17 deletions(-)
please collect all ppc4xx fix into a patch serial.
>
> diff --git a/drivers/dma/ppc4xx/adma.c b/drivers/dma/ppc4xx/adma.c
> index 279a431ccae3..42fc1791662b 100644
> --- a/drivers/dma/ppc4xx/adma.c
> +++ b/drivers/dma/ppc4xx/adma.c
> @@ -3865,28 +3865,25 @@ static int ppc440spe_adma_setup_irqs(struct ppc440spe_adma_device *adev,
> int *initcode)
> {
> struct platform_device *ofdev;
> - struct device_node *np;
> int ret;
>
> ofdev = container_of(adev->dev, struct platform_device, dev);
> - np = ofdev->dev.of_node;
> if (adev->id != PPC440SPE_XOR_ID) {
> - adev->err_irq = irq_of_parse_and_map(np, 1);
> - if (!adev->err_irq) {
> + adev->err_irq = platform_get_irq(ofdev, 1);
> + if (adev->err_irq < 0) {
> dev_warn(adev->dev, "no err irq resource?\n");
> *initcode = PPC_ADMA_INIT_IRQ2;
> - adev->err_irq = -ENXIO;
need descript in comment message to propagate irq number instead return
-ENXIO.
Frank
> } else
> atomic_inc(&ppc440spe_adma_err_irq_ref);
> } else {
> adev->err_irq = -ENXIO;
> }
>
> - adev->irq = irq_of_parse_and_map(np, 0);
> - if (!adev->irq) {
> + adev->irq = platform_get_irq(ofdev, 0);
> + if (adev->irq < 0) {
> dev_err(adev->dev, "no irq resource\n");
> *initcode = PPC_ADMA_INIT_IRQ1;
> - ret = -ENXIO;
> + ret = adev->irq;
> goto err_irq_map;
> }
> dev_dbg(adev->dev, "irq %d, err irq %d\n",
> @@ -3927,6 +3924,7 @@ static int ppc440spe_adma_setup_irqs(struct ppc440spe_adma_device *adev,
> XOR_IE_ICIE_BIT | XOR_IE_RPTIE_BIT,
> &adev->xor_reg->ier);
> } else {
> + struct device_node *np;
> u32 mask, enable;
>
> np = of_find_compatible_node(NULL, NULL, "ibm,i2o-440spe");
> @@ -3956,14 +3954,13 @@ static int ppc440spe_adma_setup_irqs(struct ppc440spe_adma_device *adev,
> return 0;
>
> err_req2:
> + if (adev->err_irq > 0)
> + free_irq(adev->err_irq, chan);
> free_irq(adev->irq, chan);
> err_req1:
> - irq_dispose_mapping(adev->irq);
> err_irq_map:
> - if (adev->err_irq > 0) {
> - if (atomic_dec_and_test(&ppc440spe_adma_err_irq_ref))
> - irq_dispose_mapping(adev->err_irq);
> - }
> + if (adev->err_irq > 0)
> + atomic_dec(&ppc440spe_adma_err_irq_ref);
> return ret;
> }
>
> @@ -3987,13 +3984,10 @@ static void ppc440spe_adma_release_irqs(struct ppc440spe_adma_device *adev,
> iowrite32(mask, &adev->i2o_reg->iopim);
> }
> free_irq(adev->irq, chan);
> - irq_dispose_mapping(adev->irq);
> if (adev->err_irq > 0) {
> free_irq(adev->err_irq, chan);
> - if (atomic_dec_and_test(&ppc440spe_adma_err_irq_ref)) {
> - irq_dispose_mapping(adev->err_irq);
> + if (atomic_dec_and_test(&ppc440spe_adma_err_irq_ref))
> iounmap(adev->i2o_reg);
> - }
> }
> }
>
> --
> 2.55.0
>
prev parent reply other threads:[~2026-09-11 16:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-10 21:27 Rosen Penev
2026-09-11 16:03 ` Frank Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aqQmQVdc33D1sOqf@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rosenp@gmail.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®