From: Frank Li <Frank.li@oss.nxp.com>
To: Rosen Penev <rosenp@gmail.com>
Cc: dmaengine@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
Frank Li <Frank.Li@kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCHv2] dmaengine: bestcomm: gen_bd: fix out-of-bounds access in PSC parameter lookup
Date: Fri, 11 Sep 2026 11:08:19 -0500 [thread overview]
Message-ID: <aqQncwl99bTdW3av@SMW015318> (raw)
In-Reply-To: <20260910192404.21809-1-rosenp@gmail.com>
On Thu, Sep 10, 2026 at 12:24:04PM -0700, Rosen Penev wrote:
> The bcom_psc_params[] array has 6 entries (indices 0-5), but
> bcom_psc_gen_bd_rx_init() checked against MPC52xx_PSC_MAXNUM which can
> be 12 when CONFIG_PPC_MPC512x is set, allowing indices 6-11 to pass
> and read past the array. The tx init function had no bounds check at
> all.
>
> A malformed device tree with a large cell-index could therefore trigger
> an out-of-bounds read. The garbage initiator and ipr values would then
> be used for MMIO writes via out_8(&bcom_eng->regs->ipr[...], ...),
> potentially causing out-of-bounds MMIO accesses.
>
> Fix both functions to use ARRAY_SIZE(bcom_psc_params) for the bounds
> check.
>
> Also remove a stray unused 'struct psc;' forward declaration in
> bcom_psc_gen_bd_tx_init.
use two patches to fix it.
Frank
>
> Assisted-by: Opencode:big-pickle
> Signed-off-by: Rosen Penev <rosenp@gmail.com>
> ---
> v2: fix title
> drivers/dma/bestcomm/gen_bd.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/dma/bestcomm/gen_bd.c b/drivers/dma/bestcomm/gen_bd.c
> index 61b5746e1a97..00dfdc4b8eba 100644
> --- a/drivers/dma/bestcomm/gen_bd.c
> +++ b/drivers/dma/bestcomm/gen_bd.c
> @@ -321,7 +321,7 @@ static const struct bcom_psc_params bcom_psc_params[] = {
> struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int queue_len,
> phys_addr_t fifo, int maxbufsize)
> {
> - if (psc_num >= MPC52xx_PSC_MAXNUM)
> + if (psc_num >= ARRAY_SIZE(bcom_psc_params))
> return NULL;
>
> return bcom_gen_bd_rx_init(queue_len, fifo,
> @@ -342,7 +342,9 @@ EXPORT_SYMBOL_GPL(bcom_psc_gen_bd_rx_init);
> struct bcom_task *
> bcom_psc_gen_bd_tx_init(unsigned psc_num, int queue_len, phys_addr_t fifo)
> {
> - struct psc;
> + if (psc_num >= ARRAY_SIZE(bcom_psc_params))
> + return NULL;
> +
> return bcom_gen_bd_tx_init(queue_len, fifo,
> bcom_psc_params[psc_num].tx_initiator,
> bcom_psc_params[psc_num].tx_ipr);
> --
> 2.55.0
>
prev parent reply other threads:[~2026-09-11 16:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-10 19:24 Rosen Penev
2026-09-11 16:08 ` Frank Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aqQncwl99bTdW3av@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rosenp@gmail.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®