mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Brian Masney <bmasney@redhat.com>
To: "Benoît Monin" <benoit.monin@bootlin.com>
Cc: "Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
	"Gregory CLEMENT" <gregory.clement@bootlin.com>,
	"Théo Lebrun" <theo.lebrun@bootlin.com>,
	"Stephen Boyd" <sboyd@kernel.org>,
	"Brian Masney" <bmasney+clk@redhat.com>,
	"Jerome Brunet" <jbrunet+clk@baylibre.com>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
	linux-mips@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] clk: eyeq: Use devm_platform_ioremap_resource()
Date: Fri, 11 Sep 2026 19:53:55 -0400	[thread overview]
Message-ID: <aqSUk0DcPB0WlorJ@redhat.com> (raw)
In-Reply-To: <20260911-clk-eyeq-res-v1-1-39b04542db38@bootlin.com>

Hi Benoît,

On Fri, Sep 11, 2026 at 01:48:47PM +0200, Benoît Monin wrote:
> Convert eqc_probe() from the open-coded platform_get_resource() +
> ioremap() sequence to devm_platform_ioremap_resource(). Besides less
> code, this requests the memory region so the OLB registers are properly
> reserved in the iomem_resource tree.
> 
> Move devm_platform_ioremap_resource() before checking for device match
> data, so OLBs bound without match data also get their memory region
> mapped and reserved.
> 
> Add an entry for mobileye,eyeq6h-central-olb without match data: its
> clocks are all registered by the early init and it has no auxiliary
> devices, so probe() now reserves its region and stops there.
> 
> Suggested-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
> Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
> ---
>  drivers/clk/clk-eyeq.c | 16 ++++++----------
>  1 file changed, 6 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/clk/clk-eyeq.c b/drivers/clk/clk-eyeq.c
> index cf37feccc734..bb680283b6f2 100644
> --- a/drivers/clk/clk-eyeq.c
> +++ b/drivers/clk/clk-eyeq.c
> @@ -513,21 +513,16 @@ static int eqc_probe(struct platform_device *pdev)
>  	const struct eqc_match_data *data;
>  	struct clk_hw_onecell_data *cells;
>  	unsigned int i, clk_count;
> -	struct resource *res;
>  	void __iomem *base;
>  	int ret;
>  
> +	base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(base))
> +		return PTR_ERR(base);
> +
>  	data = device_get_match_data(dev);
>  	if (!data)
> -		return 0; /* No clocks nor auxdevs, we are done. */
> -
> -	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	if (!res)
> -		return -ENODEV;
> -
> -	base = ioremap(res->start, resource_size(res));
> -	if (!base)
> -		return -ENOMEM;
> +		return 0; /* Early only clocks, stop here but keep resource reserved */
>  
>  	/* Init optional auxiliary devices. */
>  	eqc_auxdev_create_optional(dev, base, data->reset_auxdev_name);

Can you make this one patch.

> @@ -1175,6 +1170,7 @@ static const struct of_device_id eqc_match_table[] = {
>  	{ .compatible = "mobileye,eyeq5-olb", .data = &eqc_eyeq5_match_data },
>  	{ .compatible = "mobileye,eyeq6l-olb", .data = &eqc_eyeq6l_match_data },
>  	{ .compatible = "mobileye,eyeq6lplus-olb", .data = &eqc_eyeq6lplus_match_data },
> +	{ .compatible = "mobileye,eyeq6h-central-olb" /* no data, early only */ },
>  	{ .compatible = "mobileye,eyeq6h-west-olb", .data = &eqc_eyeq6h_west_match_data },
>  	{ .compatible = "mobileye,eyeq6h-east-olb", .data = &eqc_eyeq6h_east_match_data },
>  	{ .compatible = "mobileye,eyeq6h-south-olb", .data = &eqc_eyeq6h_south_match_data },
> 

And this a second patch?

Otherwise this looks good to me.

Brian


      parent reply	other threads:[~2026-09-11 23:54 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-11 11:48 Benoît Monin
2026-09-11 12:10 ` Théo Lebrun
2026-09-11 23:53 ` Brian Masney [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aqSUk0DcPB0WlorJ@redhat.com \
    --to=bmasney@redhat.com \
    --cc=benoit.monin@bootlin.com \
    --cc=bmasney+clk@redhat.com \
    --cc=gregory.clement@bootlin.com \
    --cc=jbrunet+clk@baylibre.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tawfik.bayouk@mobileye.com \
    --cc=theo.lebrun@bootlin.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=vladimir.kondratiev@mobileye.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®