From: Frank Li <Frank.li@oss.nxp.com>
To: Adrian Hunter <adrian.hunter@intel.com>
Cc: alexandre.belloni@bootlin.com, Frank.Li@nxp.com,
billy_tsai@aspeedtech.com, linux-i3c@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH V2 06/17] i3c: mipi-i3c-hci: Restore controller state if i3c_hci_enable_ibi() returns an error
Date: Thu, 17 Sep 2026 17:23:24 -0400 [thread overview]
Message-ID: <aqxaTH1XyxAtP8Cd@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20260917191356.133242-7-adrian.hunter@intel.com>
On Thu, Sep 17, 2026 at 10:13:45PM +0300, Adrian Hunter wrote:
> i3c_hci_enable_ibi() performs controller-side setup before sending the
> ENEC CCC to enable IBIs on the target. If the ENEC CCC fails, the
> function returns an error but leaves the controller configured as if IBI
> enabling had succeeded.
>
> Fix the error path by undoing the earlier setup when the ENEC CCC fails,
> ensuring the controller state remains consistent with the failed enable
> operation.
>
> Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
>
>
> Changes in V2:
>
> Reworded the subject, which was previously "i3c: mipi-i3c-hci:
> Fix i3c_hci_enable_ibi() error path", to say what the patch does
> rather than that it fixes something.
>
>
> drivers/i3c/master/mipi-i3c-hci/core.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i3c/master/mipi-i3c-hci/core.c b/drivers/i3c/master/mipi-i3c-hci/core.c
> index 8b3a87d8a8bb..166d9f70f435 100644
> --- a/drivers/i3c/master/mipi-i3c-hci/core.c
> +++ b/drivers/i3c/master/mipi-i3c-hci/core.c
> @@ -703,11 +703,15 @@ static int i3c_hci_enable_ibi(struct i3c_dev_desc *dev)
> struct i3c_master_controller *m = i3c_dev_get_master(dev);
> struct i3c_hci *hci = to_i3c_hci(m);
> struct i3c_hci_dev_data *dev_data = i3c_dev_get_master_data(dev);
> + int ret;
>
> mipi_i3c_hci_dat_v1.clear_flags(hci, dev_data->dat_idx, DAT_0_SIR_REJECT, 0);
> scoped_guard(spinlock_irqsave, &hci->lock)
> hci->ibi_devs[dev_data->dat_idx] = dev;
> - return i3c_master_enec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
> + ret = i3c_master_enec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
> + if (ret)
> + __i3c_hci_disable_ibi(hci, dev);
> + return ret;
> }
>
> static int i3c_hci_disable_ibi(struct i3c_dev_desc *dev)
> --
> 2.53.0
>
next prev parent reply other threads:[~2026-09-17 21:23 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-17 19:13 [PATCH V2 00/17] i3c: Fixes, cleanups and HDR-DDR support Adrian Hunter
2026-09-17 19:13 ` [PATCH V2 01/17] i3c: master: Fix out-of-bounds read in DMA bounce buffer setup Adrian Hunter
2026-09-17 19:13 ` [PATCH V2 02/17] i3c: mipi-i3c-hci: Bounce short reads irrespective of the IOMMU Adrian Hunter
2026-09-17 21:21 ` Frank Li
2026-09-17 19:13 ` [PATCH V2 03/17] i3c: mipi-i3c-hci-pci: Set drvdata before creating LTR sysfs attribute Adrian Hunter
2026-09-17 19:13 ` [PATCH V2 04/17] i3c: master: Match ACPI targets to the correct bus controller instance Adrian Hunter
2026-09-17 19:13 ` [PATCH V2 05/17] i3c: master: Remove stale GETSTATUS length check Adrian Hunter
2026-09-17 19:13 ` [PATCH V2 06/17] i3c: mipi-i3c-hci: Restore controller state if i3c_hci_enable_ibi() returns an error Adrian Hunter
2026-09-17 21:23 ` Frank Li [this message]
2026-09-17 19:13 ` [PATCH V2 07/17] i3c: mipi-i3c-hci: Send DISEC before disabling IBIs in hardware Adrian Hunter
2026-09-17 19:13 ` [PATCH V2 08/17] i3c: mipi-i3c-hci: Fix runtime PM violation in i3c_hci_free_ibi() Adrian Hunter
2026-09-17 21:32 ` Frank Li
2026-09-17 19:13 ` [PATCH V2 09/17] i3c: mipi-i3c-hci: Process multiple IBIs per interrupt Adrian Hunter
2026-09-17 21:37 ` Frank Li
2026-09-17 19:13 ` [PATCH V2 10/17] i3c: mipi-i3c-hci: Move DMA suspend/resume callbacks Adrian Hunter
2026-09-17 19:13 ` [PATCH V2 11/17] i3c: mipi-i3c-hci: Stop rings gracefully when suspending Adrian Hunter
2026-09-17 21:40 ` Frank Li
2026-09-17 19:13 ` [PATCH V2 12/17] i3c: mipi-i3c-hci: Correct RESP_DATA_LENGTH to bits 15:0 Adrian Hunter
2026-09-17 21:42 ` Frank Li
2026-09-17 19:13 ` [PATCH V2 13/17] i3c: mipi-i3c-hci: Remove invalid transfer size limit Adrian Hunter
2026-09-17 19:13 ` [PATCH V2 14/17] i3c: mipi-i3c-hci: Remove invalid HDR-BT and Fm/Fm+ definitions Adrian Hunter
2026-09-17 19:13 ` [PATCH V2 15/17] i3c: mipi-i3c-hci: Support configurable device NACK retries Adrian Hunter
2026-09-18 13:44 ` Frank Li
2026-09-17 19:13 ` [PATCH V2 16/17] i3c: Restrict HDR modes to those supported by the bus and target Adrian Hunter
2026-09-17 19:13 ` [PATCH V2 17/17] i3c: mipi-i3c-hci: Add HDR-DDR support Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aqxaTH1XyxAtP8Cd@lizhi-Precision-Tower-5810 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=adrian.hunter@intel.com \
--cc=alexandre.belloni@bootlin.com \
--cc=billy_tsai@aspeedtech.com \
--cc=linux-i3c@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®