From: Uladzislau Rezki <urezki@gmail.com>
To: Wen Jiang <jiangwenxiaomi@gmail.com>
Cc: akpm@linux-foundation.org, catalin.marinas@arm.com,
linux-mm@kvack.org, urezki@gmail.com, will@kernel.org,
Xueyuan.chen21@gmail.com, ajd@linux.ibm.com,
anshuman.khandual@arm.com, baohua@kernel.org, chleroy@kernel.org,
david@kernel.org, dev.jain@arm.com, jiangwen6@xiaomi.com,
leo.yan@arm.com, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
maddy@linux.ibm.com, mpe@ellerman.id.au, npiggin@gmail.com,
rppt@kernel.org, ryan.roberts@arm.com
Subject: Re: [PATCH v9 09/10] mm/vmalloc: map contiguous pages in batches for vmap() if possible
Date: Wed, 30 Sep 2026 17:05:22 +0200 [thread overview]
Message-ID: <ar0lMkKxugZV7xyw@milan> (raw)
In-Reply-To: <20260923062832.479455-10-jiangwen6@xiaomi.com>
On Wed, Sep 23, 2026 at 02:28:31PM +0800, Wen Jiang wrote:
> From: "Barry Song (Xiaomi)" <baohua@kernel.org>
>
> In many cases, the pages passed to vmap() may include high-order
> pages. For example, the systemheap often allocates pages in descending
> order: order 8, then 4, then 0. Currently, vmap() iterates over every
> page individually—even pages inside a high-order block are handled
> one by one.
>
> This patch detects physically contiguous pages (regardless of whether
> they are compound or non-compound) by scanning with
> num_pages_contiguous(), and maps them as a single contiguous block
> whenever possible. The mapping order is determined by taking the
> minimum of the contiguous page count and the pfn alignment, allowing
> graceful degradation when pfn alignment is less than the contiguous
> range.
>
> Pages with the same page_shift are coalesced and mapped via
> vmap_pages_range_noflush_walk() to avoid page table rewalk.
>
> As users typically allocate memory in descending orders (e.g.
> 8 → 4 → 0), once an order-0 page is encountered, we stop scanning
> for contiguous pages since subsequent pages are likely order-0 as well.
>
> Signed-off-by: Barry Song (Xiaomi) <baohua@kernel.org>
> Co-developed-by: Dev Jain <dev.jain@arm.com>
> Signed-off-by: Dev Jain <dev.jain@arm.com>
> Signed-off-by: Wen Jiang <jiangwen6@xiaomi.com>
> Tested-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
> Tested-by: Leo Yan <leo.yan@arm.com>
> ---
> mm/vmalloc.c | 82 ++++++++++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 80 insertions(+), 2 deletions(-)
>
> diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> index a43965016eb4d..37cddb7f45a4f 100644
> --- a/mm/vmalloc.c
> +++ b/mm/vmalloc.c
> @@ -3576,6 +3576,85 @@ static inline unsigned int vm_shift(pgprot_t prot, unsigned long size)
> return arch_vmap_pte_supported_shift(size);
> }
>
> +static inline int get_vmap_batch_order(struct page **pages,
> + pgprot_t prot, unsigned int nr_pages)
>
get_vmap_mapping_order()?
> +{
> + unsigned long pfn;
> + unsigned int nr_contig;
> + int order;
> +
> + if (!IS_ENABLED(CONFIG_HAVE_ARCH_HUGE_VMAP))
> + return 0;
> +
> + /* Limit nr_pages by pfn alignment */
> + pfn = page_to_pfn(*pages);
> + if (pfn > 0)
> + nr_pages = min_t(size_t, nr_pages, 1UL << __ffs(pfn));
> +
> + nr_contig = num_pages_contiguous(pages, nr_pages);
> + if (nr_contig < 2)
> + return 0;
> +
> + order = ilog2(nr_contig);
> +
> + if (vm_shift(prot, PAGE_SIZE << order) == PAGE_SHIFT)
> + return 0;
> +
> + return order;
> +}
> +
> +static int vmap_pages_range_batched(unsigned long addr, unsigned long end,
> + pgprot_t prot, struct page **pages)
> +{
> + const unsigned int nr_pages = (end - addr) >> PAGE_SHIFT;
> + unsigned int prev_shift = 0, batch_idx = 0;
> + unsigned long batch_start = addr, batch_end = addr;
> + int err;
> +
> + err = kmsan_vmap_pages_range_noflush(addr, end, prot, pages,
> + PAGE_SHIFT, GFP_KERNEL);
> +
> + if (err)
> + goto out;
> +
> + for (unsigned int i = 0; i < nr_pages; ) {
> + unsigned int shift = PAGE_SHIFT +
> + get_vmap_batch_order(pages + i, prot, nr_pages - i);
> +
> + if (!i)
> + prev_shift = shift;
> +
> + if (shift != prev_shift) {
> + err = vmap_pages_range_noflush_walk(batch_start, batch_end,
> + prot, pages + batch_idx, prev_shift);
> + if (err)
> + goto out;
> + prev_shift = shift;
> + batch_start = batch_end;
> + batch_idx = i;
> + }
> +
> + /*
> + * Once we fail to batch pages, we expect to fail batching
> + * for all remaining pages, so just give up.
> + */
> + if (shift == PAGE_SHIFT)
> + break;
> +
> + batch_end += 1UL << shift;
> + i += 1U << (shift - PAGE_SHIFT);
> + }
> +
> + /* Remaining */
> + if (batch_start < end)
> + err = vmap_pages_range_noflush_walk(batch_start, end, prot,
> + pages + batch_idx, prev_shift);
> +
> +out:
> + flush_cache_vmap(addr, end);
> + return err;
>
On error, if kmsan_vmap_pages_range_noflush() succeed you do not do a
proper cleanup?
i.e. to cleanup KMSAN metadata: kmsan_vunmap_range_noflush(addr, end);
> +}
> +
> /**
> * vmap - map an array of pages into virtually contiguous space
> * @pages: array of page pointers
> @@ -3619,8 +3698,7 @@ void *vmap(struct page **pages, unsigned int count,
> return NULL;
>
> addr = (unsigned long)area->addr;
> - if (vmap_pages_range(addr, addr + size, pgprot_nx(prot),
> - pages, PAGE_SHIFT) < 0) {
> + if (vmap_pages_range_batched(addr, addr + size, pgprot_nx(prot), pages) < 0) {
> vunmap(area->addr);
> return NULL;
> }
> --
> 2.34.1
>
next prev parent reply other threads:[~2026-09-30 15:05 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-23 6:28 [PATCH v9 00/10] mm/vmalloc: Speed up ioremap, vmalloc and vmap with contiguous memory Wen Jiang
2026-09-23 6:28 ` [PATCH v9 01/10] arm64/mm: add pte_set_huge() and pte_clear_huge() Wen Jiang
2026-09-23 21:30 ` Barry Song
2026-09-28 2:42 ` Wen Jiang
2026-09-23 6:28 ` [PATCH v9 02/10] powerpc/8xx: add pte_set_huge() Wen Jiang
2026-09-23 6:28 ` [PATCH v9 03/10] mm/vmalloc: use pte_set_huge()/pte_clear_huge() for PTE-level block mappings Wen Jiang
2026-09-23 21:38 ` Barry Song
2026-09-23 21:57 ` Christophe Leroy (CS GROUP)
2026-09-29 2:21 ` Wen Jiang
2026-09-23 6:28 ` [PATCH v9 04/10] arm64/hugetlb: drop the init_mm special case in clear_flush() Wen Jiang
2026-09-23 21:23 ` Barry Song
2026-09-23 6:28 ` [PATCH v9 05/10] arm64/vmalloc: allow arch_vmap_pte_range_map_size() to batch multiple CONT_PTE Wen Jiang
2026-09-30 15:37 ` Uladzislau Rezki
2026-09-23 6:28 ` [PATCH v9 06/10] mm/vmalloc: extract vmap_set_ptes() to consolidate PTE mapping logic Wen Jiang
2026-09-30 14:39 ` Uladzislau Rezki
2026-09-23 6:28 ` [PATCH v9 07/10] mm/vmalloc: extend page table walk to support larger page_shift sizes and eliminate page table rewalk Wen Jiang
2026-09-30 15:16 ` Uladzislau Rezki
2026-09-23 6:28 ` [PATCH v9 08/10] mm/vmalloc: extract vm_shift() to consolidate mapping shift selection Wen Jiang
2026-09-30 14:46 ` Uladzislau Rezki
2026-09-23 6:28 ` [PATCH v9 09/10] mm/vmalloc: map contiguous pages in batches for vmap() if possible Wen Jiang
2026-09-30 15:05 ` Uladzislau Rezki [this message]
2026-09-23 6:28 ` [PATCH v9 10/10] mm/vmalloc: align vm_area so vmap() can batch mappings Wen Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ar0lMkKxugZV7xyw@milan \
--to=urezki@gmail.com \
--cc=Xueyuan.chen21@gmail.com \
--cc=ajd@linux.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=anshuman.khandual@arm.com \
--cc=baohua@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=chleroy@kernel.org \
--cc=david@kernel.org \
--cc=dev.jain@arm.com \
--cc=jiangwen6@xiaomi.com \
--cc=jiangwenxiaomi@gmail.com \
--cc=leo.yan@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=maddy@linux.ibm.com \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=rppt@kernel.org \
--cc=ryan.roberts@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®