mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: "Habil Eren Türker" <habilerenturker@gmail.com>
Cc: "Habil Eren Türker" <habilerenturker@hotmail.com>,
	sashiko-bot@kernel.org, linux-input@vger.kernel.org,
	linux-kernel@vger.kernel.org, sashiko-reviews@lists.linux.dev
Subject: Re: [PATCH v2] Input: fix potential use-after-free in input_devices_seq_show
Date: Wed, 30 Sep 2026 11:15:22 -0700	[thread overview]
Message-ID: <ar1RZeMi9OK4Gro2@google.com> (raw)
In-Reply-To: <20260928181704.61015-1-habilerenturker@hotmail.com>

Hi Türker,

On Mon, Sep 28, 2026 at 09:15:24PM +0300, Habil Eren Türker wrote:
> This patch is withdrawn.
>
> Sashiko's assessment is correct. input_mutex already protects the device
> during seq_file iteration, so the explicit refcounting is unnecessary.
> Additionally, the patch had two bugs: a refcount imbalance in next() and
> a missing IS_ERR() check in stop(), which could lead to a kernel panic
> or use-after-free.
>
> I will investigate the actual root cause further.

To save you some time digging through the syzbot reports I had an LLM
scan them and here are the findings:

It is not the struct input_dev itself that is being freed while on
input_dev_list, but rather the strings pointed to by dev->name or
dev->phys when a driver either fails to unregister its input device
before freeing its private data, or leaks an input_dev instance.

Because syzbot groups KASAN crashes by the top frame (string_nocheck() ->
string() -> vsnprintf() -> seq_printf()), the 63 crash reports under
https://syzkaller.appspot.com/bug?extid=bc6b37960b1d13f68f9f actually
belong to three separate bugs:

1. 25 of the 63 reports crash in irq_seq_show() (kernel/irq/proc.c:601)
   when reading /proc/interrupts, which is unrelated to input.

2. 29 of the reports (including the initial syzbot report [1]) crash in
   input_devices_seq_show() on line 1178 when formatting dev->name:

     seq_printf(seq, "N: Name=\"%s\"\n", dev->name ? dev->name : "");

   In all 29 reports, the bad read is at offset 0x758 (1880 bytes) inside
   a kmalloc-2k object. In most runs that slab slot had already exited
   the KASAN quarantine and been reallocated (for example by netlink
   __alloc_skb() or sk_prot_alloc()), masking the original owner.
   However, one report [2] (log [3]) caught the object before reuse:

     Allocated by: redrat3_dev_probe() (drivers/media/rc/redrat3.c:1023)
     Freed by:     redrat3_delete() <- redrat3_dev_probe() (redrat3.c:1124)

   redrat3_init_rc_dev() registered the rc_dev (and its input_dev, with
   input_dev->name pointing to rr3->name at offset 0x758 of struct
   redrat3_dev), and when redrat3_enable_detector() subsequently failed,
   the error path freed rr3 without calling rc_unregister_device(),
   leaving the input_dev registered with a dangling dev->name pointer.
   This is already fixed in linux-next by commit af452b9e0133 ("media:
   redrat3: fix UAF in probe error path leaving rc device registered").

3. The remaining 9 reports crash in input_devices_seq_show() on the next
   line (drivers/input/input.c:1179) when formatting dev->phys:

     seq_printf(seq, "P: Phys=%s\n", dev->phys ? dev->phys : "");

   (dev->name does not fault there because xpad->name points to a static
   string literal in xpad_device[].) All 9 reports read offset 0x220
   (544 bytes) inside a kmalloc-1k object (offsetof(struct usb_xpad,
   phys)). Two reports [4] (log [5]) and [6] caught the struct usb_xpad
   object before slab reuse:

     Allocated by: xpad_probe() (drivers/input/joystick/xpad.c:2052)
     Freed by:     xpad_disconnect() (drivers/input/joystick/xpad.c:2236)
     Last work:    xpad360w_process_packet() <- xpad_irq_in()

   In xpad360w_process_packet(), xpad->pad_present is updated in URB
   completion context and schedules xpad->work (xpad_presence_work()).
   If presence packets toggle xpad->pad_present (true -> false -> true)
   before xpad_presence_work() runs, xpad_presence_work() sees
   xpad->pad_present == true and calls xpad_init_input() again even
   though xpad->input_created is already true. That overwrites xpad->dev
   (and xpad->led) and leaks the old input_dev on input_dev_list (in [5]
   it registers input69 through input79 on the same USB interface). When
   xpad_disconnect() later runs, xpad_deinit_input() only unregisters
   the last xpad->dev and frees xpad, leaving the leaked input_dev
   instances on input_dev_list with dev->phys pointing into freed
   xpad->phys.

[1] https://syzkaller.appspot.com/text?tag=CrashReport&x=12bef8c9580000
[2] https://syzkaller.appspot.com/text?tag=CrashReport&x=15d46e79580000
[3] https://syzkaller.appspot.com/text?tag=CrashLog&x=16cc5679580000
[4] https://syzkaller.appspot.com/text?tag=CrashReport&x=115fd67e580000
[5] https://syzkaller.appspot.com/text?tag=CrashLog&x=17f40456580000
[6] https://syzkaller.appspot.com/text?tag=CrashReport&x=11131092580000

Thanks.

-- 
Dmitry

  parent reply	other threads:[~2026-09-30 18:15 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-28 17:11 Habil Eren Türker
     [not found] ` <20260928172128.D6AB41F000FF@smtp.kernel.org>
     [not found]   ` <20260928181704.61015-1-habilerenturker@hotmail.com>
2026-09-30 18:15     ` Dmitry Torokhov [this message]
2026-10-01 16:04       ` Habil Eren Türker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ar1RZeMi9OK4Gro2@google.com \
    --to=dmitry.torokhov@gmail.com \
    --cc=habilerenturker@gmail.com \
    --cc=habilerenturker@hotmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sashiko-bot@kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®