mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@oss.nxp.com>
To: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Cc: nicolas.dufresne@collabora.com, p.zabel@pengutronix.de,
	mchehab@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
	conor+dt@kernel.org, Frank.Li@nxp.com, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com,
	linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
	devicetree@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@collabora.com
Subject: Re: [PATCH v3 1/3] media: verisilicon: Remove deprecated variant
Date: Thu, 24 Sep 2026 09:16:43 -0500	[thread overview]
Message-ID: <arUwy2kCDe4S4Wgv@SMW015318> (raw)
In-Reply-To: <20260924130453.196299-2-benjamin.gaignard@collabora.com>

On Thu, Sep 24, 2026 at 03:04:51PM +0200, Benjamin Gaignard wrote:

subject: media: verisilicon: Remove deprecated nxp,imx8mq-vpu variant

> "nxp,imx8mq-vpu" is tagged as deprecated since:
> commit f3116f2e52e6 ("media: dt-bindings: media: nxp, imx8mq-vpu: Split G1 and G2 nodes")
> merged since v5.17-rc1.
> There is more reference to it since that.
> Remove for driver to clean up the code.

Nit: Please merge to a paragraph, or add empty line between paragraph.

Thank you for cleanup

Frank

>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
> ---
> changes in v3:
> - remove more dead code
>
> changes in v2:
> - have a separate patch for documentation
> - rebased on v7.3-rc1
>
>  .../media/platform/verisilicon/hantro_drv.c   |  10 --
>  .../media/platform/verisilicon/imx8m_vpu_hw.c | 105 ------------------
>  2 files changed, 115 deletions(-)
>
> diff --git a/drivers/media/platform/verisilicon/hantro_drv.c b/drivers/media/platform/verisilicon/hantro_drv.c
> index ad71c0402ef3..12c804dcc669 100644
> --- a/drivers/media/platform/verisilicon/hantro_drv.c
> +++ b/drivers/media/platform/verisilicon/hantro_drv.c
> @@ -725,7 +725,6 @@ static const struct of_device_id of_hantro_match[] = {
>  #endif
>  #ifdef CONFIG_VIDEO_HANTRO_IMX8M
>  	{ .compatible = "nxp,imx8mm-vpu-g1", .data = &imx8mm_vpu_g1_variant, },
> -	{ .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, },
>  	{ .compatible = "nxp,imx8mq-vpu-g1", .data = &imx8mq_vpu_g1_variant },
>  	{ .compatible = "nxp,imx8mq-vpu-g2", .data = &imx8mq_vpu_g2_variant },
>  #endif
> @@ -1100,15 +1099,6 @@ static int hantro_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>
> -	/*
> -	 * Support for nxp,imx8mq-vpu is kept for backwards compatibility
> -	 * but it's deprecated. Please update your DTS file to use
> -	 * nxp,imx8mq-vpu-g1 or nxp,imx8mq-vpu-g2 instead.
> -	 */
> -	if (of_device_is_compatible(pdev->dev.of_node, "nxp,imx8mq-vpu"))
> -		dev_warn(&pdev->dev, "%s compatible is deprecated\n",
> -			 match->compatible);
> -
>  	INIT_DELAYED_WORK(&vpu->watchdog_work, hantro_watchdog);
>
>  	vpu->clocks = devm_kcalloc(&pdev->dev, vpu->variant->num_clocks,
> diff --git a/drivers/media/platform/verisilicon/imx8m_vpu_hw.c b/drivers/media/platform/verisilicon/imx8m_vpu_hw.c
> index fa4224de4b99..b091d807ae4e 100644
> --- a/drivers/media/platform/verisilicon/imx8m_vpu_hw.c
> +++ b/drivers/media/platform/verisilicon/imx8m_vpu_hw.c
> @@ -25,55 +25,6 @@
>  #define CTRL_G1_PP_FUSE		0x0c
>  #define CTRL_G2_DEC_FUSE	0x10
>
> -static void imx8m_soft_reset(struct hantro_dev *vpu, u32 reset_bits)
> -{
> -	u32 val;
> -
> -	/* Assert */
> -	val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
> -	val &= ~reset_bits;
> -	writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
> -
> -	udelay(2);
> -
> -	/* Release */
> -	val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
> -	val |= reset_bits;
> -	writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
> -}
> -
> -static void imx8m_clk_enable(struct hantro_dev *vpu, u32 clock_bits)
> -{
> -	u32 val;
> -
> -	val = readl(vpu->ctrl_base + CTRL_CLOCK_ENABLE);
> -	val |= clock_bits;
> -	writel(val, vpu->ctrl_base + CTRL_CLOCK_ENABLE);
> -}
> -
> -static int imx8mq_runtime_resume(struct hantro_dev *vpu)
> -{
> -	int ret;
> -
> -	ret = clk_bulk_prepare_enable(vpu->variant->num_clocks, vpu->clocks);
> -	if (ret) {
> -		dev_err(vpu->dev, "Failed to enable clocks\n");
> -		return ret;
> -	}
> -
> -	imx8m_soft_reset(vpu, RESET_G1 | RESET_G2);
> -	imx8m_clk_enable(vpu, CLOCK_G1 | CLOCK_G2);
> -
> -	/* Set values of the fuse registers */
> -	writel(0xffffffff, vpu->ctrl_base + CTRL_G1_DEC_FUSE);
> -	writel(0xffffffff, vpu->ctrl_base + CTRL_G1_PP_FUSE);
> -	writel(0xffffffff, vpu->ctrl_base + CTRL_G2_DEC_FUSE);
> -
> -	clk_bulk_disable_unprepare(vpu->variant->num_clocks, vpu->clocks);
> -
> -	return 0;
> -}
> -
>  /*
>   * Supported formats.
>   */
> @@ -234,45 +185,10 @@ static const struct hantro_fmt imx8m_vpu_g2_dec_fmts[] = {
>  	},
>  };
>
> -static int imx8mq_vpu_hw_init(struct hantro_dev *vpu)
> -{
> -	vpu->ctrl_base = vpu->reg_bases[vpu->variant->num_regs - 1];
> -
> -	return 0;
> -}
> -
> -static void imx8m_vpu_g1_reset(struct hantro_ctx *ctx)
> -{
> -	struct hantro_dev *vpu = ctx->dev;
> -
> -	imx8m_soft_reset(vpu, RESET_G1);
> -}
> -
>  /*
>   * Supported codec ops.
>   */
>
> -static const struct hantro_codec_ops imx8mq_vpu_codec_ops[] = {
> -	[HANTRO_MODE_MPEG2_DEC] = {
> -		.run = hantro_g1_mpeg2_dec_run,
> -		.reset = imx8m_vpu_g1_reset,
> -		.init = hantro_mpeg2_dec_init,
> -		.exit = hantro_mpeg2_dec_exit,
> -	},
> -	[HANTRO_MODE_VP8_DEC] = {
> -		.run = hantro_g1_vp8_dec_run,
> -		.reset = imx8m_vpu_g1_reset,
> -		.init = hantro_vp8_dec_init,
> -		.exit = hantro_vp8_dec_exit,
> -	},
> -	[HANTRO_MODE_H264_DEC] = {
> -		.run = hantro_g1_h264_dec_run,
> -		.reset = imx8m_vpu_g1_reset,
> -		.init = hantro_h264_dec_init,
> -		.exit = hantro_h264_dec_exit,
> -	},
> -};
> -
>  static const struct hantro_codec_ops imx8mq_vpu_g1_codec_ops[] = {
>  	[HANTRO_MODE_MPEG2_DEC] = {
>  		.run = hantro_g1_mpeg2_dec_run,
> @@ -319,30 +235,9 @@ static const struct hantro_irq imx8mq_g2_irqs[] = {
>  	{ "g2", hantro_g2_irq },
>  };
>
> -static const char * const imx8mq_clk_names[] = { "g1", "g2", "bus" };
> -static const char * const imx8mq_reg_names[] = { "g1", "g2", "ctrl" };
>  static const char * const imx8mq_g1_clk_names[] = { "g1" };
>  static const char * const imx8mq_g2_clk_names[] = { "g2" };
>
> -const struct hantro_variant imx8mq_vpu_variant = {
> -	.dec_fmts = imx8m_vpu_dec_fmts,
> -	.num_dec_fmts = ARRAY_SIZE(imx8m_vpu_dec_fmts),
> -	.postproc_fmts = imx8m_vpu_postproc_fmts,
> -	.num_postproc_fmts = ARRAY_SIZE(imx8m_vpu_postproc_fmts),
> -	.postproc_ops = &hantro_g1_postproc_ops,
> -	.codec = HANTRO_MPEG2_DECODER | HANTRO_VP8_DECODER |
> -		 HANTRO_H264_DECODER,
> -	.codec_ops = imx8mq_vpu_codec_ops,
> -	.init = imx8mq_vpu_hw_init,
> -	.runtime_resume = imx8mq_runtime_resume,
> -	.irqs = imx8mq_irqs,
> -	.num_irqs = ARRAY_SIZE(imx8mq_irqs),
> -	.clk_names = imx8mq_clk_names,
> -	.num_clocks = ARRAY_SIZE(imx8mq_clk_names),
> -	.reg_names = imx8mq_reg_names,
> -	.num_regs = ARRAY_SIZE(imx8mq_reg_names)
> -};
> -
>  static const struct of_device_id imx8mq_vpu_shared_resources[] = {
>  	{ .compatible = "nxp,imx8mq-vpu-g1", },
>  	{ .compatible = "nxp,imx8mq-vpu-g2", },
> --
> 2.53.0
>
>

  reply	other threads:[~2026-09-24 14:16 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-24 13:04 [PATCH v3 0/3] Remove unused variant and code clean up Benjamin Gaignard
2026-09-24 13:04 ` [PATCH v3 1/3] media: verisilicon: Remove deprecated variant Benjamin Gaignard
2026-09-24 14:16   ` Frank Li [this message]
2026-09-24 13:04 ` [PATCH v3 2/3] media: dt-bindings: media: nxp, imx8mq-vpu: Remove nxp,imx8mq-vpu Benjamin Gaignard
2026-09-24 14:19   ` Frank Li
2026-09-24 16:55   ` Conor Dooley
2026-09-24 17:51     ` Nicolas Dufresne
2026-09-24 13:04 ` [PATCH v3 3/3] media: verisilicon: Remove useless internal fields Benjamin Gaignard
2026-09-24 14:19   ` Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=arUwy2kCDe4S4Wgv@SMW015318 \
    --to=frank.li@oss.nxp.com \
    --cc=Frank.Li@nxp.com \
    --cc=benjamin.gaignard@collabora.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@collabora.com \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mchehab@kernel.org \
    --cc=nicolas.dufresne@collabora.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®