From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Adam Wermuth <adam@wermuth.pl>
Cc: Jonas Karlman <jonas@kwiboo.se>, Heiko Stuebner <heiko@sntech.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/3] arm64: dts: rockchip: Enable USB 2.0 host1 on Radxa ROCK 3B
Date: Fri, 25 Sep 2026 15:25:57 +0200 [thread overview]
Message-ID: <arZ0nqBvHDzSbZOE@venus> (raw)
In-Reply-To: <CABkrwJ6uvjS8bez6j0MZbp2Y+O9RhyU09YOLrUzHaeUEVC=Qkg@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2619 bytes --]
Hi,
On Thu, Sep 24, 2026 at 09:03:00PM +0200, Adam Wermuth wrote:
> On Thu, 24 Sep 2026 6:12 PM, Jonas Karlman wrote:
> > This and next patch is likely best suited as an dt-overlay.
>
> Thanks for the review. That makes sense, as the B-key slot is not
> always populated.
>
> For v2 I will move the host1 enablement and the WWAN power, RESET#
> and W_DISABLE1# handling into a new rk3568-rock-3b-wwan.dtso overlay,
> and keep only the fan patch in the base DT.
Why would this be better suited as an Overlay? Nothing describes the
specific card plugged in as it is auto-discovered via USB. The
overlays are mostly required for things that cannot easily be
auto-detected. FWIW we don't have M.2 Key M as a DT overlay either.
Something to consider is, that for Key E and Key M there is a proper
DT binding now: Documentation/devicetree/bindings/connector/pcie-m2-*.yaml
We probably want the same for Key B.
Greetings,
-- Sebastian
>
>
> czw., 24 wrz 2026 o 18:12 Jonas Karlman <jonas@kwiboo.se> napisał(a):
> >
> > Hi Adam,
> >
> > On 9/24/2026 9:14 AM, Adam Wermuth wrote:
> > > The USB 2.0 data lines of the M.2 B-key slot are routed to USB2_HOST3,
> > > which is served by usb_host1_ehci/ohci through the host port of
> > > usb2phy1. Enable the controllers and the PHY port so that modules in
> > > the B-key slot, such as LTE modems, can enumerate.
> >
> > This and next patch is likely best suited as an dt-overlay.
> >
> > Regards,
> > Jonas
> >
> > >
> > > Signed-off-by: Adam Wermuth <adam@wermuth.pl>
> > > ---
> > > arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts | 13 +++++++++++++
> > > 1 file changed, 13 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
> > > index 149a5306bb03..ad9a91c0d0d0 100644
> > > --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
> > > +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3b.dts
> > > @@ -758,6 +758,14 @@ &usb_host0_xhci {
> > > status = "okay";
> > > };
> > >
> > > +&usb_host1_ehci {
> > > + status = "okay";
> > > +};
> > > +
> > > +&usb_host1_ohci {
> > > + status = "okay";
> > > +};
> > > +
> > > &usb_host1_xhci {
> > > status = "okay";
> > > };
> > > @@ -780,6 +788,11 @@ &usb2phy1 {
> > > status = "okay";
> > > };
> > >
> > > +&usb2phy1_host {
> > > + phy-supply = <&vcc5v0_usb_host>;
> > > + status = "okay";
> > > +};
> > > +
> > > &usb2phy1_otg {
> > > phy-supply = <&vcc5v0_usb_host>;
> > > status = "okay";
> >
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2026-09-25 13:26 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-24 7:14 [PATCH 0/3] Subject: [PATCH 0/3] arm64: dts: rockchip: Enable M.2 B-key slot and fan " Adam Wermuth
2026-09-24 7:14 ` [PATCH 1/3] arm64: dts: rockchip: Enable USB 2.0 host1 " Adam Wermuth
2026-09-24 16:12 ` Jonas Karlman
2026-09-24 19:03 ` Adam Wermuth
2026-09-25 13:25 ` Sebastian Reichel [this message]
2026-09-25 13:56 ` Adam Wermuth
2026-09-25 15:42 ` Alexey Charkov
2026-09-24 7:14 ` [PATCH 2/3] arm64: dts: rockchip: Enable M.2 B-key WWAN slot " Adam Wermuth
2026-09-24 7:14 ` [PATCH 3/3] arm64: dts: rockchip: Add PWM fan to " Adam Wermuth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=arZ0nqBvHDzSbZOE@venus \
--to=sebastian.reichel@collabora.com \
--cc=adam@wermuth.pl \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jonas@kwiboo.se \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®