From: Yeoreum Yun <yeoreum.yun@arm.com>
To: sashiko-reviews@lists.linux.dev
Cc: Yeoreum Yun <yeoreum.yun@arm.com>,
linux-rt-devel@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v12 01/14] coresight: etm4x: read-back TRCSEQSTR at disabling and prohibit modifying seq_state while enabling.
Date: Fri, 2 Oct 2026 18:02:53 +0100 [thread overview]
Message-ID: <ar_jvRE0C0Jb8WDE@e129823.arm.com> (raw)
In-Reply-To: <20260924174611.917571F00893@smtp.kernel.org>
> Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
> - [Medium] coresight: TOCTOU race in seq_state_store lockless mode check
> - [Low] coresight: misplaced IS_ERR_OR_NULL(drvdata) after dereference
> --
>
> commit fb240199cfa6db080873efbe2c007beb70c01070
> Author: Yeoreum Yun <yeoreum.yun@arm.com>
>
> coresight: etm4x: read-back TRCSEQSTR at disabling and prohibit modifying seq_state while enabling.
>
> TRCSEQSTR can be changed by the ETM while a session is active. Its value
> therefore needs to be preserved when a sysfs session is disabled so that
> users can read the current sequence state after the session ends.
>
> > diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
> > index cc6cdd3ae29d5..db3cf4ad6806c 100644
> > --- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
> > +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
> > @@ -1437,6 +1437,8 @@ static ssize_t seq_state_store(struct device *dev,
> > return -EINVAL;
> > if (val >= drvdata->nrseqstate)
> > return -EINVAL;
> > + if (IS_ERR_OR_NULL(drvdata) || coresight_get_mode(drvdata->csdev))
> > + return -EBUSY;
>
> [Severity: Low]
> Does this code introduce a regression by checking drvdata for NULL after it
> has already been dereferenced?
>
> Looking at seq_state_store(), drvdata is dereferenced during the check for
> val >= drvdata->nrseqstate before IS_ERR_OR_NULL(drvdata) is called.
Yes. I'll fix it.
>
> While drvdata is fundamentally guaranteed to be valid in this sysfs context,
> making the check technically dead code rather than a reachable crash, should
> the validation be moved before the dereference if it is kept?
>
> >
> > config->seq_state = val;
>
> [Severity: Medium]
> Could this lockless mode check cause a regression?
>
> A concurrent thread could enable the trace session immediately after the
> lockless coresight_get_mode() check evaluates to disabled. This would allow
> config->seq_state to be modified while the session is actively starting or
> already active, completely defeating the patch's stated goal of prohibiting
> state modification during an active session.
>
> Should raw_spin_lock(&drvdata->spinlock) be held across both the mode check
> and the subsequent state update to prevent this regression?
>
> > return size;
> > }
This doesn't matter, TBH I don't expect user concurrently setup the
configuration while session is not ended yet and similar problem
is already exist before separation of this patch too.
So, this is ignorable.
--
Sincerely,
Yeoreum Yun
next prev parent reply other threads:[~2026-10-02 17:02 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-24 17:33 [PATCH v12 00/14] fix several inconsistencies with sysfs configuration in etmX Yeoreum Yun
2026-09-24 17:33 ` [PATCH v12 01/14] coresight: etm4x: read-back TRCSEQSTR at disabling and prohibit modifying seq_state while enabling Yeoreum Yun
2026-09-24 17:46 ` sashiko-bot
2026-10-02 17:02 ` Yeoreum Yun [this message]
2026-09-29 10:40 ` Mike Leach
2026-09-24 17:33 ` [PATCH v12 02/14] coresight: etm4x: prohibit modifying cntr_val while session is enabled Yeoreum Yun
2026-09-29 10:40 ` Mike Leach
2026-09-24 17:33 ` [PATCH v12 03/14] coresight: etm3x: prohibit modifying cntr_val and reset " Yeoreum Yun
2026-09-24 17:58 ` sashiko-bot
2026-10-02 17:22 ` Yeoreum Yun
2026-09-24 17:33 ` [PATCH v12 04/14] coresight: etm4x: fix inconsistencies with sysfs configuration Yeoreum Yun
2026-09-29 10:48 ` Mike Leach
2026-09-24 17:33 ` [PATCH v12 05/14] coresight: etm3x: " Yeoreum Yun
2026-09-29 10:49 ` Mike Leach
2026-09-24 17:33 ` [PATCH v12 06/14] coresight: etm3x: remove redundant cpu online check on etm_enable_sysfs() Yeoreum Yun
2026-09-24 17:33 ` [PATCH v12 07/14] coresight: etm4x: introduce struct etm4_caps Yeoreum Yun
2026-09-24 17:33 ` [PATCH v12 08/14] coresight: etm4x: exclude ss_status from drvdata->config Yeoreum Yun
2026-09-24 18:21 ` sashiko-bot
2026-10-02 17:15 ` Yeoreum Yun
2026-09-29 10:53 ` Mike Leach
2026-09-24 17:33 ` [PATCH v12 09/14] coresight: etm4x: remove s_ex_level from config Yeoreum Yun
2026-09-24 17:33 ` [PATCH v12 10/14] coresight: etm4x: rename local config as curr_config referring drvdata->curr_config Yeoreum Yun
2026-09-29 10:54 ` Mike Leach
2026-09-24 17:33 ` [PATCH v12 11/14] coresight: etm4x: rename drvdata->config to sysfs_config Yeoreum Yun
2026-09-29 10:55 ` Mike Leach
2026-09-24 17:33 ` [PATCH v12 12/14] coresight: etm3x: introduce struct etm_caps Yeoreum Yun
2026-09-24 17:33 ` [PATCH v12 13/14] coresight: etm3x: rename local config as curr_config referring drvdata->curr_config Yeoreum Yun
2026-09-29 10:55 ` Mike Leach
2026-09-24 17:33 ` [PATCH v12 14/14] coresight: etm3x: rename drvdata->config to sysfs_config Yeoreum Yun
2026-09-24 18:36 ` sashiko-bot
2026-10-02 17:16 ` Yeoreum Yun
2026-09-29 10:55 ` Mike Leach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ar_jvRE0C0Jb8WDE@e129823.arm.com \
--to=yeoreum.yun@arm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rt-devel@lists.linux.dev \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®