From: Jarkko Sakkinen <jarkko@kernel.org>
To: Surendran Kanagaraj <surenkj@amazon.com>
Cc: Peter Huewe <peterhuewe@gmx.de>, Jason Gunthorpe <jgg@ziepe.ca>,
linux-integrity@vger.kernel.org, linux-kernel@vger.kernel.org,
nh-open-source@amazon.com, Alexander Graf <graf@amazon.de>,
Gunnar Kudrjavets <gunnarku@amazon.com>,
Josh Levinson <joshlev@amazon.com>
Subject: Re: [PATCH 1/2] tpm: Add per-chip timeout for transient unavailability
Date: Fri, 25 Sep 2026 19:03:10 +0300 [thread overview]
Message-ID: <arabPv2YCddSMu_b@kernel.org> (raw)
In-Reply-To: <20260923142834.16786-2-surenkj@amazon.com>
On Wed, Sep 23, 2026 at 02:28:33PM +0000, Surendran Kanagaraj wrote:
> TPM commands need to complete within the command duration defined
> in the TPM2 spec or to keep answering TPM2_RC_RETRY for at most
> TPM2_DURATION_LONG (2s).
>
> Devices that have different timeout requirements than the TPM2 spec
> could exhaust the retry budget or exceed the command duration. These
> failures disable the device during an auth session, failing all
> subsequent TPM requests. Worse, when a TPM2_CC_FLUSH_CONTEXT command
> fails, it leaks the TPM's transient memory:
>
> tpm tpm0: in retry loop
> tpm tpm0: tpm2_load_context: failed with a TPM error 0x0922
> ...
> tpm tpm0: A TPM error (2338) occurred flushing context
>
> Fix this by adding chip->busy_timeout_ms to support devices that know
> the expected delay window. This value raises the TPM2_RC_RETRY retry
> budget and per-command durations to at least busy_timeout_ms. Chips
> that leave it at 0 keep the current timeouts. The driver sets it for
> NitroTPM in the following patch.
>
> Tested with CONFIG_TCG_TPM2_HMAC=y and the following patch with the
> NitroTPM quirk applied, in QEMU with swtpm by stalling commands and
> holding the TPM in TPM2_RC_RETRY.
>
> Assisted-by: LLM
> Signed-off-by: Surendran Kanagaraj <surenkj@amazon.com>
> ---
> drivers/char/tpm/tpm-interface.c | 11 ++++++++---
> drivers/char/tpm/tpm.h | 2 +-
> drivers/char/tpm/tpm2-cmd.c | 17 ++++++++++++-----
> include/linux/tpm.h | 7 +++++++
> 4 files changed, 28 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
> index 0bab78c8767c..a423395b201a 100644
> --- a/drivers/char/tpm/tpm-interface.c
> +++ b/drivers/char/tpm/tpm-interface.c
> @@ -53,7 +53,7 @@ MODULE_PARM_DESC(suspend_pcr,
> unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal)
> {
> if (chip->flags & TPM_CHIP_FLAG_TPM2)
> - return tpm2_calc_ordinal_duration(ordinal);
> + return tpm2_calc_ordinal_duration(chip, ordinal);
> else
> return tpm1_calc_ordinal_duration(chip, ordinal);
> }
> @@ -213,7 +213,8 @@ static ssize_t tpm_try_transmit(struct tpm_chip *chip, void *buf, size_t bufsiz)
> *
> * A wrapper around tpm_try_transmit() that handles TPM2_RC_RETRY returns from
> * the TPM and retransmits the command after a delay up to a maximum wait of
> - * TPM2_DURATION_LONG.
> + * TPM2_DURATION_LONG, or chip->busy_timeout_ms when the driver declared a
> + * longer transient unavailability window.
> *
> * Note that TPM 1.x never returns TPM2_RC_RETRY so the retry logic is TPM 2.0
> * only.
> @@ -228,6 +229,7 @@ ssize_t tpm_transmit(struct tpm_chip *chip, u8 *buf, size_t bufsiz)
> /* space for header and handles */
> u8 save[TPM_HEADER_SIZE + 3*sizeof(u32)];
> unsigned int delay_msec = TPM2_DURATION_SHORT;
> + unsigned int max_delay_msec = TPM2_DURATION_LONG;
> u32 rc = 0;
> ssize_t ret;
> const size_t save_size = min(sizeof(save), bufsiz);
> @@ -241,6 +243,9 @@ ssize_t tpm_transmit(struct tpm_chip *chip, u8 *buf, size_t bufsiz)
> */
> memcpy(save, buf, save_size);
>
> + if (chip->busy_timeout_ms > max_delay_msec)
> + max_delay_msec = chip->busy_timeout_ms;
> +
> for (;;) {
> ret = tpm_try_transmit(chip, buf, bufsiz);
> if (ret < 0)
> @@ -255,7 +260,7 @@ ssize_t tpm_transmit(struct tpm_chip *chip, u8 *buf, size_t bufsiz)
> if (rc == TPM2_RC_TESTING && cc == TPM2_CC_SELF_TEST)
> break;
>
> - if (delay_msec > TPM2_DURATION_LONG) {
> + if (delay_msec > max_delay_msec) {
> if (rc == TPM2_RC_RETRY)
> dev_err(&chip->dev, "in retry loop\n");
> else
> diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
> index fa554c5ad80b..457eba8d03dd 100644
> --- a/drivers/char/tpm/tpm.h
> +++ b/drivers/char/tpm/tpm.h
> @@ -119,7 +119,7 @@ ssize_t tpm2_get_tpm_pt(struct tpm_chip *chip, u32 property_id,
> ssize_t tpm2_get_pcr_allocation(struct tpm_chip *chip);
> int tpm2_auto_startup(struct tpm_chip *chip);
> void tpm2_shutdown(struct tpm_chip *chip, u16 shutdown_type);
> -unsigned long tpm2_calc_ordinal_duration(u32 ordinal);
> +unsigned long tpm2_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal);
> int tpm2_probe(struct tpm_chip *chip);
> int tpm2_get_cc_attrs_tbl(struct tpm_chip *chip);
> int tpm2_find_cc(struct tpm_chip *chip, u32 cc);
> diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c
> index ae22295df798..dc5ed57fefe1 100644
> --- a/drivers/char/tpm/tpm2-cmd.c
> +++ b/drivers/char/tpm/tpm2-cmd.c
> @@ -78,20 +78,27 @@ static const struct {
>
> /**
> * tpm2_calc_ordinal_duration() - Calculate the maximum command duration
> + * @chip: TPM chip to use.
> * @ordinal: TPM command ordinal.
> *
> * Returns the maximum amount of time the chip is expected by kernel to
> - * take in jiffies.
> + * take in jiffies. The duration is never lower than chip->busy_timeout_ms.
> */
> -unsigned long tpm2_calc_ordinal_duration(u32 ordinal)
> +unsigned long tpm2_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal)
> {
> + unsigned long duration = TPM2_DURATION_DEFAULT;
> int i;
>
> for (i = 0; i < ARRAY_SIZE(tpm2_ordinal_duration_map); i++)
> - if (ordinal == tpm2_ordinal_duration_map[i].ordinal)
> - return msecs_to_jiffies(tpm2_ordinal_duration_map[i].duration);
> + if (ordinal == tpm2_ordinal_duration_map[i].ordinal) {
> + duration = tpm2_ordinal_duration_map[i].duration;
> + break;
> + }
> +
> + if (duration < chip->busy_timeout_ms)
> + duration = chip->busy_timeout_ms;
>
> - return msecs_to_jiffies(TPM2_DURATION_DEFAULT);
> + return msecs_to_jiffies(duration);
> }
>
> /**
> diff --git a/include/linux/tpm.h b/include/linux/tpm.h
> index 0db277af45c3..7089067412d3 100644
> --- a/include/linux/tpm.h
> +++ b/include/linux/tpm.h
> @@ -140,6 +140,13 @@ struct tpm_chip {
> unsigned long duration[TPM_NUM_DURATIONS]; /* jiffies */
> bool duration_adjusted;
>
> + /*
> + * Longest unavailability expected from the chip in ms. Raises the
> + * TPM2_RC_RETRY retry budget and the per-command durations to at
> + * least this value; 0 keeps the defaults.
> + */
> + unsigned int busy_timeout_ms;
So I think this is a wrong solution.
Instead this should be tpm_crb internal and you should simply patch
chip->duration[]. See tpm_tis_core for example.
> +
> struct dentry *bios_dir;
>
> const struct attribute_group *groups[3 + TPM_MAX_HASHES];
> --
> 2.47.3
>
Br, Jarkko
next prev parent reply other threads:[~2026-09-25 16:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-23 14:28 [PATCH 0/2] tpm: Handle transient NitroTPM unavailability Surendran Kanagaraj
2026-09-23 14:28 ` [PATCH 1/2] tpm: Add per-chip timeout for transient unavailability Surendran Kanagaraj
2026-09-25 9:04 ` Breno Leitao
2026-09-25 16:03 ` Jarkko Sakkinen [this message]
2026-09-23 14:28 ` [PATCH 2/2] tpm_crb: Raise timeouts for Amazon NitroTPM Surendran Kanagaraj
2026-09-25 15:55 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=arabPv2YCddSMu_b@kernel.org \
--to=jarkko@kernel.org \
--cc=graf@amazon.de \
--cc=gunnarku@amazon.com \
--cc=jgg@ziepe.ca \
--cc=joshlev@amazon.com \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nh-open-source@amazon.com \
--cc=peterhuewe@gmx.de \
--cc=surenkj@amazon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®