From: Greg KH <gregkh@linuxfoundation.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Arnd Bergmann <arnd@arndb.de>,
linux-kernel@vger.kernel.org
Subject: [GIT PULL] Char/Misc/IIO driver driver updates for 7.3-rc6
Date: Sat, 3 Oct 2026 13:37:38 +0200 [thread overview]
Message-ID: <asDpAk0A05UF8LLN@kroah.com> (raw)
The following changes since commit fd73f4a6659897191fa0d40695fe370925dd3780:
Linux 7.3-rc3 (2026-09-13 14:38:02 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-7.3-rc6
for you to fetch changes up to 6c95ca52f27855dd2fb74131c8d4e8325d2af7de:
tty: add missing driver flag kernel-doc colon (2026-10-02 11:15:22 +0200)
----------------------------------------------------------------
TTY/Serial fixes for 7.3-rc6
Here are some small tty/serial driver fixes for 7.3-rc6. Nothing major
here, just lots of small fixes for reported issues, some of them very
long-standing:
- tty hangup fixes that have been there since the BKL days and kept
tripping people up over time.
- vt selection bugfix
- other vt bugfixes (memory leaks and screen update fixes)
- n_gsm bugfix
- qcom-geni serial driver bugfix
- 8250 serial driver bugfixes
- other tiny serial driver fixes
All of these have been in linux-next, the last few only a few days but
testing here seems solid (this pull request was generated on that tree)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----------------------------------------------------------------
Abel Vesa (1):
serial: qcom-geni: Fix unbalanced runtime PM resume for no_console_suspend
Arnd Bergmann (1):
serial: qcom-geni: avoid unused-function warning
Daniel Starke (1):
tty: n_gsm: fix missing modem controls after DLCI open in convergence layer type 2
Fan Wu (2):
serial: 8250_bcm7271: fix use-after-free in brcmuart_remove()
tty: serial: max3100: shut down timer before freeing port
Hui Peng (1):
vt: selection: Fix unsigned underflow and slab-out-of-bounds read in paste_selection()
Johan Hovold (11):
tty: abort break signalling on hangup
tty: tty_port: restore TTY_IO_ERROR on activation failure
tty: port: fix tty_port_tty_vhangup() race
serial: revert guards in uart_wait_modem_status()
serial: fix ioctl hangup race
serial: fix TIOCMIWAIT race
serial: abort TIOCMIWAIT on hangup
tty: amiserial: fix broken TIOCMIWAIT
tty: add break_wait kernel-doc
tty: fix saved termios reset race
tty: add missing driver flag kernel-doc colon
John Ogness (1):
serial: 8250: Change console_msr_work to IRQ_WORK_LAZY
Joshua Rogers (2):
tty: vcc: zero-initialize control packet in vcc_send_ctl()
tty: vcc: hold port lock when clearing tty pointer in vcc_cleanup
Kendall Willis (1):
serial: 8250_omap: fix wake irq cleared during suspend
Konrad Dybcio (1):
serial: qcom-geni: keep registered console runtime active
Maciej W. Rozycki (1):
MAINTAINERS: Add self for the sb1250-duart serial driver
Mingyu Wang (1):
tty: vt: fix memory leak in vc_allocate()
Paul Mbewe (3):
serial: sc16is7xx: fix TX gap caused by kfifo circular buffer wrap-around
serial: sc16is7xx: refill TX FIFO below trigger using fresh TXLVL
serial: sc16is7xx: reduce TX refill rate with half-FIFO trigger
Rosen Penev (1):
tty: serial: mpc52xx_uart: move static declarations up.
Ruslan Valiyev (1):
serial: core: fix NULL pointer dereference in serial_core_unregister_port()
Simon Gassner (1):
serial: tegra: don't clear the Tx FIFO on an Rx-only reset
Viken Dadhaniya (2):
soc: qcom: geni-se: Correct QUP Core ICC vote constants
tty: serial: qcom_geni_serial: Keep console RX functional after deep idle
Wentao Liang (3):
serial: ma35d1: Fix clock reference leak in ma35d1serial_probe()
kgdboc: Fix tty driver reference leak in configure_kgdboc()
serial: vt8500: Fix clock reference leak in vt8500_serial_probe()
Yi Yang (1):
vc_screen: reload vc pointer before if (ret) in vcs_write() to avoid UAF
Zizhi Wo (1):
vt: skip screen update for DEC alignment test on backgroup consoles
MAINTAINERS | 5 +
drivers/staging/greybus/uart.c | 3 +-
drivers/tty/amiserial.c | 9 +-
drivers/tty/n_gsm.c | 47 ++-----
drivers/tty/serial/8250/8250_bcm7271.c | 2 +-
drivers/tty/serial/8250/8250_omap.c | 15 ++-
drivers/tty/serial/8250/8250_port.c | 2 +-
drivers/tty/serial/kgdboc.c | 9 ++
drivers/tty/serial/ma35d1_serial.c | 6 +-
drivers/tty/serial/max3100.c | 13 +-
drivers/tty/serial/mpc52xx_uart.c | 6 +-
drivers/tty/serial/qcom_geni_serial.c | 229 ++++++++++++++++++---------------
drivers/tty/serial/sc16is7xx.c | 53 ++++++--
drivers/tty/serial/serial-tegra.c | 18 ++-
drivers/tty/serial/serial_core.c | 76 ++++++++---
drivers/tty/serial/vt8500_serial.c | 1 +
drivers/tty/tty_io.c | 54 +++++---
drivers/tty/tty_port.c | 91 ++++++++-----
drivers/tty/vcc.c | 5 +-
drivers/tty/vt/selection.c | 4 +-
drivers/tty/vt/vc_screen.c | 23 ++--
drivers/tty/vt/vt.c | 5 +-
drivers/usb/class/cdc-acm.c | 2 +-
drivers/usb/serial/usb-serial.c | 3 +-
include/linux/soc/qcom/geni-se.h | 15 +--
include/linux/tty.h | 2 +
include/linux/tty_driver.h | 6 +
include/linux/tty_port.h | 22 +---
28 files changed, 442 insertions(+), 284 deletions(-)
next reply other threads:[~2026-10-03 11:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-03 11:37 Greg KH [this message]
2026-10-03 11:38 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=asDpAk0A05UF8LLN@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=arnd@arndb.de \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®