Re: [PATCH v4 2/2] staging: media: atomisp: Remove dbg_level and dbg_func module parameters

[Sakari Ailus <sakari.ailus@linux.intel.com>]

Hi Prajval,

On Tue, Jul 21, 2026 at 10:05:32PM +0530, Prajval Chaudhary wrote:
> Remove the 'dbg_level' and 'dbg_func' module parameters to align the
> driver's debug facility with standard Linux kernel APIs (printk/vprintk).
> 
> The internal logic relying on custom debug parameters has been updated
> so that message logging and function tracing no longer depend on exposed
> userspace module parameters.
> 
> Signed-off-by: Prajval Chaudhary <prajvalchaudhari733@gmail.com>
> ---
>  drivers/staging/media/atomisp/pci/atomisp_common.h   |  2 --
>  .../staging/media/atomisp/pci/atomisp_compat_css20.c | 12 +++---------
>  drivers/staging/media/atomisp/pci/atomisp_v4l2.c     |  7 -------
>  .../pci/runtime/debug/interface/ia_css_debug.h       |  7 +++----
>  .../atomisp/pci/runtime/debug/src/ia_css_debug.c     |  4 ++--
>  5 files changed, 8 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/staging/media/atomisp/pci/atomisp_common.h b/drivers/staging/media/atomisp/pci/atomisp_common.h
> index 7c6c0124ff72..aa230c3708dd 100644
> --- a/drivers/staging/media/atomisp/pci/atomisp_common.h
> +++ b/drivers/staging/media/atomisp/pci/atomisp_common.h
> @@ -20,8 +20,6 @@
>  
>  #include "ia_css.h"
>  
> -extern int dbg_level;
> -extern int dbg_func;
>  extern const int pad_w;
>  extern const int pad_h;
>  
> diff --git a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c
> index ea49ebe2da5c..647f6e7e2455 100644
> --- a/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c
> +++ b/drivers/staging/media/atomisp/pci/atomisp_compat_css20.c
> @@ -784,7 +784,7 @@ int atomisp_css_load_firmware(struct atomisp_device *isp)
>  	isp->css_env.isp_css_env.hw_access_env.load = atomisp_css2_hw_load;
>  	isp->css_env.isp_css_env.hw_access_env.store = atomisp_css2_hw_store;
>  
> -	__set_css_print_env(isp, dbg_func);
> +	__set_css_print_env(isp, 1);
>  
>  	isp->css_env.isp_css_env.print_env.error_print = atomisp_vprintk;
>  
> @@ -3372,18 +3372,12 @@ void atomisp_css_set_isp_config_applied_frame(struct atomisp_sub_device *asd,
>  
>  int atomisp_get_css_dbgfunc(void)
>  {
> -	return dbg_func;
> +	return 1;

Maybe you could switch to similar v4l2 macros?

>  }
>  
>  int atomisp_set_css_dbgfunc(struct atomisp_device *isp, int opt)
>  {
> -	int ret;
> -
> -	ret = __set_css_print_env(isp, opt);
> -	if (ret == 0)
> -		dbg_func = opt;
> -
> -	return ret;
> +	return __set_css_print_env(isp, opt);
>  }
>  
>  void atomisp_en_dz_capt_pipe(struct atomisp_sub_device *asd, bool enable)
> diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
> index d117fea2860c..55b3d4d3d6ad 100644
> --- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
> +++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
> @@ -45,15 +45,8 @@
>  #define CSTATE_EXIT_LATENCY_C1  1
>  
>  /* cross component debug message flag */
> -int dbg_level;
> -module_param(dbg_level, int, 0644);
> -MODULE_PARM_DESC(dbg_level, "debug message level (default:0)");
>  
>  /* log function switch */
> -int dbg_func = 1;
> -module_param(dbg_func, int, 0644);
> -MODULE_PARM_DESC(dbg_func,
> -		 "log function switch non/printk (default:printk)");
>  
>  /*
>   * Set to 16x16 since this is the amount of lines and pixels the sensor
> diff --git a/drivers/staging/media/atomisp/pci/runtime/debug/interface/ia_css_debug.h b/drivers/staging/media/atomisp/pci/runtime/debug/interface/ia_css_debug.h
> index 2d0e906530af..029adbdca945 100644
> --- a/drivers/staging/media/atomisp/pci/runtime/debug/interface/ia_css_debug.h
> +++ b/drivers/staging/media/atomisp/pci/runtime/debug/interface/ia_css_debug.h
> @@ -8,7 +8,7 @@
>  #define _IA_CSS_DEBUG_H_
>  
>  /*! \file */
> -
> +#include <linux/printk.h>
>  #include <type_support.h>
>  #include <linux/stdarg.h>
>  #include <linux/bits.h>
> @@ -39,7 +39,6 @@
>  #define IA_CSS_DEBUG_INFO    9
>  
>  /* Global variable which controls the verbosity levels of the debug tracing */
> -extern int dbg_level;
>  
>  /*! @brief Enum defining the different isp parameters to dump.
>   *  Values can be combined to dump a combination of sets.
> @@ -125,8 +124,8 @@ static inline void __printf(2, 0) ia_css_debug_vdtrace(unsigned int level,
>  						       const char *fmt,
>  						       va_list args)
>  {
> -	if (dbg_level >= level)
> -		sh_css_vprint(fmt, args);
> +	if (level <= IA_CSS_DEBUG_WARNING)
> +		vprintk(fmt, args);
>  }
>  
>  __printf(2, 3) void ia_css_debug_dtrace(unsigned int level,
> diff --git a/drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c b/drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c
> index 5113aa5973f3..86b2cca2f441 100644
> --- a/drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c
> +++ b/drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c
> @@ -135,13 +135,13 @@ void ia_css_debug_dtrace(unsigned int level, const char *fmt, ...)
>  
>  void ia_css_debug_set_dtrace_level(const unsigned int trace_level)
>  {
> -	dbg_level = trace_level;
> +	/* Trace level is now controlled dynamically via Linux kernel dynamic debug facility */
>  	return;
>  }
>  
>  unsigned int ia_css_debug_get_dtrace_level(void)
>  {
> -	return dbg_level;
> +	return 0;
>  }
>  
>  static const char *debug_stream_format2str(const enum atomisp_input_format

-- 
Regards,

Sakari Ailus