From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Icenowy Zheng <uwu@icenowy.me>
Cc: Han Gao <gaohan@iscas.ac.cn>, Drew Fustini <fustini@kernel.org>,
Guo Ren <guoren@kernel.org>, Fu Wei <wefu@redhat.com>,
Ulf Hansson <ulfh@kernel.org>, Han Gao <rabenda.cn@gmail.com>,
linux-riscv@lists.infradead.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] power: reset: th1520-aon: send RPCs from sleepable handlers
Date: Sun, 4 Oct 2026 23:52:34 +0200 [thread overview]
Message-ID: <asLJGnsAQIfHr7oj@venus> (raw)
In-Reply-To: <d081ce3c9f0b319e8d8cc41480c0d2862618eed6.camel@icenowy.me>
[-- Attachment #1: Type: text/plain, Size: 6327 bytes --]
Hi,
On Wed, Sep 16, 2026 at 03:45:52PM +0800, Icenowy Zheng wrote:
> 在 2026-09-16三的 14:55 +0800,Han Gao写道:
> > The AON RPC takes a mutex and waits for mailbox interrupts. The final
> > sys-off handlers run on atomic notifier chains, where this can sleep
> > with interrupts disabled.
> >
> > Send the requests from the preparation handlers before syscore
> > shutdown.
> > Retain a final power-off handler to advertise capability and report
> > failure without issuing another RPC. Let other providers handle
> > fallback.
> >
> > Report RPC errors and allow one second after a successful return for
> > the
> > asynchronous operation to take effect. This is a software fallback
> > timeout, not a hardware timing requirement.
> >
> > Fixes: 2d81a24a74e5 ("driver: reset: th1520-aon: add driver for
> > poweroff/reboot via AON FW")
> > Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
> > ---
> > drivers/power/reset/th1520-aon-reboot.c | 49
> > +++++++++++++++++++++++----------
> > 1 file changed, 34 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/power/reset/th1520-aon-reboot.c
> > b/drivers/power/reset/th1520-aon-reboot.c
> > index
> > ec249667a0ffd74829357d57b9e63c3524ea3759..ace70491834dc9a63ed543427e4
> > 0e4cbc0a9388f 100644
> > --- a/drivers/power/reset/th1520-aon-reboot.c
> > +++ b/drivers/power/reset/th1520-aon-reboot.c
> > @@ -6,6 +6,7 @@
> > */
> >
> > #include <linux/auxiliary_bus.h>
> > +#include <linux/delay.h>
> > #include <linux/firmware/thead/thead,th1520-aon.h>
> > #include <linux/module.h>
> > #include <linux/notifier.h>
> > @@ -14,37 +15,46 @@
> > #include <linux/slab.h>
> >
> > #define TH1520_AON_REBOOT_PRIORITY 200
> > +/* Allow an accepted asynchronous command to take effect before
> > fallback. */
> > +#define TH1520_AON_REBOOT_TIMEOUT_MS 1000
> >
> > struct th1520_aon_msg_empty_body {
> > struct th1520_aon_rpc_msg_hdr hdr;
> > u16 reserved[12];
> > } __packed __aligned(1);
> >
> > -static int th1520_aon_pwroff_handler(struct sys_off_data *data)
> > +static int th1520_aon_reboot_request(struct sys_off_data *data, u8
> > func)
> > {
> > struct th1520_aon_chan *aon_chan = data->cb_data;
> > struct th1520_aon_msg_empty_body msg = {};
> > + int ret;
> >
> > msg.hdr.svc = TH1520_AON_RPC_SVC_WDG;
> > - msg.hdr.func = TH1520_AON_WDG_FUNC_POWER_OFF;
> > + msg.hdr.func = func;
> > msg.hdr.size = TH1520_AON_RPC_MSG_NUM;
> >
> > - th1520_aon_call_rpc(aon_chan, &msg);
> > + ret = th1520_aon_call_rpc(aon_chan, &msg);
> > + if (ret)
> > + dev_err(data->dev, "AON WDG command %u failed:
> > %d\n", func, ret);
> > + else
> > + msleep(TH1520_AON_REBOOT_TIMEOUT_MS);
> >
> > return NOTIFY_DONE;
> > }
> >
> > -static int th1520_aon_restart_handler(struct sys_off_data *data)
> > +static int th1520_aon_pwroff_handler(struct sys_off_data *data)
> > {
> > - struct th1520_aon_chan *aon_chan = data->cb_data;
> > - struct th1520_aon_msg_empty_body msg = {};
> > -
> > - msg.hdr.svc = TH1520_AON_RPC_SVC_WDG;
> > - msg.hdr.func = TH1520_AON_WDG_FUNC_RESTART;
> > - msg.hdr.size = TH1520_AON_RPC_MSG_NUM;
> > + return th1520_aon_reboot_request(data,
> > TH1520_AON_WDG_FUNC_POWER_OFF);
> > +}
> >
> > - th1520_aon_call_rpc(aon_chan, &msg);
> > +static int th1520_aon_restart_handler(struct sys_off_data *data)
> > +{
> > + return th1520_aon_reboot_request(data,
> > TH1520_AON_WDG_FUNC_RESTART);
> > +}
> >
> > +static int th1520_aon_pwroff_failed(struct sys_off_data *data)
> > +{
> > + dev_err(data->dev, "AON did not power off the system\n");
> > return NOTIFY_DONE;
> > }
> >
> > @@ -54,8 +64,11 @@ static int th1520_aon_reboot_probe(struct
> > auxiliary_device *adev,
> > struct device *dev = &adev->dev;
> > int ret;
> >
> > - /* Expect struct th1520_aon_chan to be passed via
> > platform_data */
> > - ret = devm_register_sys_off_handler(dev,
> > SYS_OFF_MODE_POWER_OFF,
> > + /*
> > + * RPC takes a mutex and waits for mailbox interrupts. Send
> > after device
> > + * shutdown, but before syscore shutdown and the final
> > atomic callbacks.
> > + */
> > + ret = devm_register_sys_off_handler(dev,
> > SYS_OFF_MODE_POWER_OFF_PREPARE,
>
> Interestingly I tried to find usage of this key in the kernel, and
> found that the macsmc-reboot driver has a "enter_atomic" operation.
>
> I don't know whether it's a overdesign.
>
> The imx_rproc driver even creates its own PREPARE handler that "setup
> mailbox to non-blocking mode".
>
> Maybe it's better to replicate the behavior of macsmc / imx_rproc in
> the AON driver?
>
> >
> > TH1520_AON_REBOOT_PRIORITY,
> >
> > th1520_aon_pwroff_handler,
> > adev-
> > >dev.platform_data);
> > @@ -65,7 +78,7 @@ static int th1520_aon_reboot_probe(struct
> > auxiliary_device *adev,
> > return ret;
> > }
> >
> > - ret = devm_register_sys_off_handler(dev,
> > SYS_OFF_MODE_RESTART,
> > + ret = devm_register_sys_off_handler(dev,
> > SYS_OFF_MODE_RESTART_PREPARE,
> >
> > TH1520_AON_REBOOT_PRIORITY,
> >
> > th1520_aon_restart_handler,
> > adev-
> > >dev.platform_data);
> > @@ -75,7 +88,13 @@ static int th1520_aon_reboot_probe(struct
> > auxiliary_device *adev,
> > return ret;
> > }
> >
> > - return 0;
> > + /*
> > + * Advertise power-off capability to kernel_can_power_off().
> > This final
> > + * callback must not send RPCs; let other providers try if
> > AON failed.
> > + */
> > + return devm_register_sys_off_handler(dev,
> > SYS_OFF_MODE_POWER_OFF,
> > +
> > TH1520_AON_REBOOT_PRIORITY,
> > +
> > th1520_aon_pwroff_failed, dev_get_platdata(dev));
>
> I don't know whether such a handler is necessary when the real power
> operation is done in PREPARE handler. The odroid-go-ultra-poweroff
> driver, which also (ab?)uses PREPARE handler for powering off, doesn't
> register a non-PREPARE handler.
The real operation shouldn't be done in the PREPARE handler as that
results in the machine loosing power before it went through the
whole shutdown/reboot process.
Greetings,
-- Sebastian
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
prev parent reply other threads:[~2026-10-04 21:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-16 6:55 Han Gao
2026-09-16 7:45 ` Icenowy Zheng
2026-10-04 21:52 ` Sebastian Reichel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=asLJGnsAQIfHr7oj@venus \
--to=sebastian.reichel@collabora.com \
--cc=fustini@kernel.org \
--cc=gaohan@iscas.ac.cn \
--cc=guoren@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=rabenda.cn@gmail.com \
--cc=ulfh@kernel.org \
--cc=uwu@icenowy.me \
--cc=wefu@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®