From: Pablo Neira Ayuso <pablo@netfilter.org>
To: Hari Chandrakanthan <hari.chandrakanthan@oss.qualcomm.com>
Cc: fw@strlen.de, phil@nwl.cc, netfilter-devel@vger.kernel.org,
coreteam@netfilter.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH net-next] netfilter: nf_conntrack: add ct expression support for netdev egress chains
Date: Tue, 6 Oct 2026 16:04:15 +0200 [thread overview]
Message-ID: <asT_37n_6viz9dJa@chamomile> (raw)
In-Reply-To: <20261006085844.2694120-1-hari.chandrakanthan@oss.qualcomm.com>
On Tue, Oct 06, 2026 at 02:28:44PM +0530, Hari Chandrakanthan wrote:
> Add support for using the ct expression in nftables netdev egress chains.
> This enables QoS policy enforcement at the netdev egress hook by
> allowing ct operations such as copying connmark to packet mark.
>
> Add an explicit NFPROTO_NETDEV case in nf_ct_netns_get() and
> nf_ct_netns_put() that enables conntrack for IPv4, IPv6 and bridge when a
> ct expression is added to a netdev chain.
>
> Restrict ct expression use in the netdev family to egress hooks only, as
> the connection entry is not yet available at ingress.
>
> Sharing this change as an RFC, to get feedback. The patch has been tested
> by configuring nft rules at netdev egress hook to set ct mark and copy
> ct mark into skb->mark. Also, the patch is validated at netdev ingress to
> ensure the nft rule with ct mark set action is rejected.
>
> Signed-off-by: Hari Chandrakanthan <hari.chandrakanthan@oss.qualcomm.com>
> ---
> net/netfilter/nf_conntrack_proto.c | 26 ++++++++++++++++++++++++++
> net/netfilter/nft_ct.c | 22 ++++++++++++++++++++++
> 2 files changed, 48 insertions(+)
>
> diff --git a/net/netfilter/nf_conntrack_proto.c b/net/netfilter/nf_conntrack_proto.c
> index 7a40e4e0e33e..b8ee46262901 100644
> --- a/net/netfilter/nf_conntrack_proto.c
> +++ b/net/netfilter/nf_conntrack_proto.c
> @@ -587,11 +587,36 @@ static int nf_ct_netns_inet_get(struct net *net)
> int nf_ct_netns_get(struct net *net, u8 nfproto)
> {
> int err;
> + bool bridge_acquired = false;
>
> switch (nfproto) {
> case NFPROTO_INET:
> err = nf_ct_netns_inet_get(net);
> break;
> + case NFPROTO_NETDEV:
> + err = nf_ct_netns_do_get(net, NFPROTO_BRIDGE);
Hm. This is pulling in the bridge conntrack hooks.
> + if (err < 0) {
> + mutex_lock(&nf_ct_proto_mutex);
> + if (nf_ct_bridge_info) {
> + /* Module present but hook registration failed.*/
> + mutex_unlock(&nf_ct_proto_mutex);
> + return err;
> + }
> + mutex_unlock(&nf_ct_proto_mutex);
> + /* Bridge module absent, netdev egress handles routed
> + * traffic too, bridge conntrack is only needed for
> + * bridged frames.
> + */
> + } else {
> + bridge_acquired = true;
> + }
> + err = nf_ct_netns_inet_get(net);
And inet too.
I understand this is to deal with a situation where only ct rule is
placed in netdev/egress.
Is it really worth? I would expect users already have rules refering
to ct from either bridge and/or netdev would match here.
It looks a bit like too much to enable them all for the "a ct rule in
netdev/egress only".
Probably better solution would be to enable nf_conntrack_in() from the
netdev hook (just an earlier call), but this also needs to enable
packet defrag from there. Then, enabling all inet and bridge is not
required, because netdev/ingress would handle the creation/lookup of
the conntrack.
> + if (err < 0) {
> + if (bridge_acquired)
> + nf_ct_netns_put(net, NFPROTO_BRIDGE);
> + return err;
> + }
> + break;
> case NFPROTO_BRIDGE:
> err = nf_ct_netns_do_get(net, NFPROTO_BRIDGE);
> if (err < 0)
> @@ -615,6 +640,7 @@ void nf_ct_netns_put(struct net *net, uint8_t nfproto)
> {
> switch (nfproto) {
> case NFPROTO_BRIDGE:
> + case NFPROTO_NETDEV:
> nf_ct_netns_do_put(net, NFPROTO_BRIDGE);
> fallthrough;
> case NFPROTO_INET:
> diff --git a/net/netfilter/nft_ct.c b/net/netfilter/nft_ct.c
> index 3c4c2faa7398..e90e73475b0c 100644
> --- a/net/netfilter/nft_ct.c
> +++ b/net/netfilter/nft_ct.c
> @@ -649,6 +649,15 @@ static void nft_ct_get_destroy(const struct nft_ctx *ctx,
> nf_ct_netns_put(ctx->net, ctx->family);
> }
>
> +static int nft_ct_validate(const struct nft_ctx *ctx,
> + const struct nft_expr *expr)
> +{
> + if (ctx->family != NFPROTO_NETDEV)
> + return 0;
> +
> + return nft_chain_validate_hooks(ctx->chain, 1 << NF_NETDEV_EGRESS);
> +}
> +
> static void nft_ct_set_destroy(const struct nft_ctx *ctx,
> const struct nft_expr *expr)
> {
> @@ -732,6 +741,7 @@ static const struct nft_expr_ops nft_ct_get_ops = {
> .init = nft_ct_get_init,
> .destroy = nft_ct_get_destroy,
> .dump = nft_ct_get_dump,
> + .validate = nft_ct_validate,
> };
>
> #ifdef CONFIG_MITIGATION_RETPOLINE
> @@ -742,6 +752,7 @@ static const struct nft_expr_ops nft_ct_get_fast_ops = {
> .init = nft_ct_get_init,
> .destroy = nft_ct_get_destroy,
> .dump = nft_ct_get_dump,
> + .validate = nft_ct_validate,
> };
> #endif
>
> @@ -752,9 +763,19 @@ static const struct nft_expr_ops nft_ct_set_ops = {
> .init = nft_ct_set_init,
> .destroy = nft_ct_set_destroy,
> .dump = nft_ct_set_dump,
> + .validate = nft_ct_validate,
> };
>
> #ifdef CONFIG_NF_CONNTRACK_ZONES
> +static int nft_ct_set_zone_validate(const struct nft_ctx *ctx,
> + const struct nft_expr *expr)
> +{
> + if (ctx->family == NFPROTO_NETDEV)
> + return -EOPNOTSUPP;
> +
> + return 0;
> +}
> +
> static const struct nft_expr_ops nft_ct_set_zone_ops = {
> .type = &nft_ct_type,
> .size = NFT_EXPR_SIZE(sizeof(struct nft_ct)),
> @@ -762,6 +783,7 @@ static const struct nft_expr_ops nft_ct_set_zone_ops = {
> .init = nft_ct_set_init,
> .destroy = nft_ct_set_destroy,
> .dump = nft_ct_set_dump,
> + .validate = nft_ct_set_zone_validate,
> };
> #endif
>
> --
> 2.34.1
>
prev parent reply other threads:[~2026-10-06 14:04 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-06 8:58 Hari Chandrakanthan
2026-10-06 11:39 ` Florian Westphal
2026-10-06 14:04 ` Pablo Neira Ayuso [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=asT_37n_6viz9dJa@chamomile \
--to=pablo@netfilter.org \
--cc=coreteam@netfilter.org \
--cc=fw@strlen.de \
--cc=hari.chandrakanthan@oss.qualcomm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=netfilter-devel@vger.kernel.org \
--cc=phil@nwl.cc \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®