From: Frank Li <Frank.li@oss.nxp.com>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: Linus Walleij <linusw@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Shenwei Wang <shenwei.wang@nxp.com>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
linux-gpio@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH v4 04/10] gpio: mxc: replace of_device_is_compatible() with hwdata flags
Date: Thu, 8 Oct 2026 15:05:14 -0500 [thread overview]
Message-ID: <asf3esVzUN2sNU2y@SMW015318> (raw)
In-Reply-To: <20261007-gpio-mxc-cleanup-v4-4-c9f5a8b50df9@nxp.com>
On Wed, Oct 07, 2026 at 06:44:19PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Replace the runtime of_device_is_compatible() check for "fsl,imx7d-gpio"
> with a flags field in mxc_gpio_hwdata to move the power-off capability
> from a per-instance bool populated at probe time to static per-compatible
> data.
>
> Introduce MXC_GPIO_HAS_POWER_OFF and a dedicated imx7d_gpio_hwdata
> instance that carries it, along with a mxc_gpio_has_power_off() helper
> that replaces every former port->power_off test.
>
> While at it, factor the register offsets shared by imx35 and imx7d into
> a MXC_GPIO_HW_DATA_COMMON macro to avoid duplicating twelve identical
> initializers.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> drivers/gpio/gpio-mxc.c | 50 ++++++++++++++++++++++++++++++-------------------
> 1 file changed, 31 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
> index 1ff5c2afb2e8..c08f0b59d284 100644
> --- a/drivers/gpio/gpio-mxc.c
> +++ b/drivers/gpio/gpio-mxc.c
> @@ -33,6 +33,8 @@
> #define IMX_SCU_WAKEUP_RISE_EDGE 6
> #define IMX_SCU_WAKEUP_HIGH_LVL 7
>
> +#define MXC_GPIO_HAS_POWER_OFF BIT(0)
> +
> /* device type dependent stuff */
> struct mxc_gpio_hwdata {
> unsigned dr_reg;
> @@ -47,6 +49,7 @@ struct mxc_gpio_hwdata {
> unsigned high_level;
> unsigned rise_edge;
> unsigned fall_edge;
> + unsigned int flags;
> };
>
> struct mxc_gpio_reg_saved {
> @@ -70,13 +73,26 @@ struct mxc_gpio_port {
> struct device *dev;
> u32 both_edges;
> struct mxc_gpio_reg_saved gpio_saved_reg;
> - bool power_off;
> bool is_pad_wakeup;
> unsigned long wakeup_pads;
> u32 pad_type[32];
> const struct mxc_gpio_hwdata *hwdata;
> };
>
> +#define MXC_GPIO_HW_DATA_COMMON \
> + .dr_reg = 0x00, \
> + .gdir_reg = 0x04, \
> + .psr_reg = 0x08, \
> + .icr1_reg = 0x0c, \
> + .icr2_reg = 0x10, \
> + .imr_reg = 0x14, \
> + .isr_reg = 0x18, \
> + .edge_sel_reg = 0x1c, \
> + .low_level = 0x00, \
> + .high_level = 0x01, \
> + .rise_edge = 0x02, \
> + .fall_edge = 0x03
> +
> static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = {
> .dr_reg = 0x1c,
> .gdir_reg = 0x00,
> @@ -108,20 +124,19 @@ static struct mxc_gpio_hwdata imx31_gpio_hwdata = {
> };
>
> static struct mxc_gpio_hwdata imx35_gpio_hwdata = {
> - .dr_reg = 0x00,
> - .gdir_reg = 0x04,
> - .psr_reg = 0x08,
> - .icr1_reg = 0x0c,
> - .icr2_reg = 0x10,
> - .imr_reg = 0x14,
> - .isr_reg = 0x18,
> - .edge_sel_reg = 0x1c,
> - .low_level = 0x00,
> - .high_level = 0x01,
> - .rise_edge = 0x02,
> - .fall_edge = 0x03,
> + MXC_GPIO_HW_DATA_COMMON,
> +};
> +
> +static struct mxc_gpio_hwdata imx7d_gpio_hwdata = {
> + MXC_GPIO_HW_DATA_COMMON,
> + .flags = MXC_GPIO_HAS_POWER_OFF,
> };
>
> +static inline bool mxc_gpio_has_power_off(struct mxc_gpio_port *port)
> +{
> + return port->hwdata->flags & MXC_GPIO_HAS_POWER_OFF;
> +}
> +
> #define GPIO_DR (port->hwdata->dr_reg)
> #define GPIO_GDIR (port->hwdata->gdir_reg)
> #define GPIO_PSR (port->hwdata->psr_reg)
> @@ -142,7 +157,7 @@ static const struct of_device_id mxc_gpio_dt_ids[] = {
> { .compatible = "fsl,imx21-gpio", .data = &imx1_imx21_gpio_hwdata },
> { .compatible = "fsl,imx31-gpio", .data = &imx31_gpio_hwdata },
> { .compatible = "fsl,imx35-gpio", .data = &imx35_gpio_hwdata },
> - { .compatible = "fsl,imx7d-gpio", .data = &imx35_gpio_hwdata },
> + { .compatible = "fsl,imx7d-gpio", .data = &imx7d_gpio_hwdata },
> { .compatible = "fsl,imx8dxl-gpio", .data = &imx35_gpio_hwdata },
> { .compatible = "fsl,imx8qm-gpio", .data = &imx35_gpio_hwdata },
> { .compatible = "fsl,imx8qxp-gpio", .data = &imx35_gpio_hwdata },
> @@ -447,9 +462,6 @@ static int mxc_gpio_probe(struct platform_device *pdev)
> if (IS_ERR(port->clk))
> return PTR_ERR(port->clk);
>
> - if (of_device_is_compatible(np, "fsl,imx7d-gpio"))
> - port->power_off = true;
> -
> pm_runtime_get_noresume(&pdev->dev);
> pm_runtime_set_active(&pdev->dev);
> pm_runtime_enable(&pdev->dev);
> @@ -536,7 +548,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>
> static void mxc_gpio_save_regs(struct mxc_gpio_port *port)
> {
> - if (!port->power_off)
> + if (!mxc_gpio_has_power_off(port))
> return;
>
> port->gpio_saved_reg.icr1 = readl(port->base + GPIO_ICR1);
> @@ -549,7 +561,7 @@ static void mxc_gpio_save_regs(struct mxc_gpio_port *port)
>
> static void mxc_gpio_restore_regs(struct mxc_gpio_port *port)
> {
> - if (!port->power_off)
> + if (!mxc_gpio_has_power_off(port))
> return;
>
> writel(port->gpio_saved_reg.icr1, port->base + GPIO_ICR1);
>
> --
> 2.51.0
>
>
next prev parent reply other threads:[~2026-10-08 20:05 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-07 10:44 [PATCH v4 00/10] gpio: mxc: bug fixes and probe cleanup Peng Fan (OSS)
2026-10-07 10:44 ` [PATCH v4 01/10] gpio: mxc: fix race between chained IRQ handler install and probe completion Peng Fan (OSS)
2026-10-07 10:44 ` [PATCH v4 02/10] gpio: mxc: fix wakeup_pads bit operations Peng Fan (OSS)
2026-10-08 19:59 ` Frank Li
2026-10-09 0:59 ` Peng Fan
2026-10-07 10:44 ` [PATCH v4 03/10] gpio: mxc: use for_each_set_bit() to iterate wakeup pads Peng Fan (OSS)
2026-10-08 20:00 ` Frank Li
2026-10-07 10:44 ` [PATCH v4 04/10] gpio: mxc: replace of_device_is_compatible() with hwdata flags Peng Fan (OSS)
2026-10-08 20:05 ` Frank Li [this message]
2026-10-07 10:44 ` [PATCH v4 05/10] gpio: mxc: convert pad wakeup compatible checks to " Peng Fan (OSS)
2026-10-08 20:10 ` Frank Li
2026-10-09 1:00 ` Peng Fan
2026-10-07 10:44 ` [PATCH v4 06/10] gpio: mxc: convert probe error handling to devres Peng Fan (OSS)
2026-10-08 20:12 ` Frank Li
2026-10-09 2:18 ` Peng Fan
2026-10-07 10:44 ` [PATCH v4 07/10] gpio: mxc: switch probe error paths to dev_err_probe() Peng Fan (OSS)
2026-10-08 20:15 ` Frank Li
2026-10-07 10:44 ` [PATCH v4 08/10] gpio: mxc: use local dev variable Peng Fan (OSS)
2026-10-08 20:16 ` Frank Li
2026-10-07 10:44 ` [PATCH v4 09/10] gpio: mxc: introduce MXC_ICR macros and use field_prep/field_get Peng Fan (OSS)
2026-10-08 20:25 ` Frank Li
2026-10-07 10:44 ` [PATCH v4 10/10] gpio: mxc: use BIT() macro for single-bit operations Peng Fan (OSS)
2026-10-08 20:26 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=asf3esVzUN2sNU2y@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=andy.shevchenko@gmail.com \
--cc=brgl@kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=peng.fan@oss.nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=shenwei.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®