mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Antti Laakso <antti.laakso@linux.intel.com>
To: praveenpuglia@gmail.com
Cc: Miguel Vadillo <miguel.vadillo@intel.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Mehdi Djait <mehdi.djait@linux.intel.com>,
	Marco Nenciarini <mnencia@kcore.it>,
	linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	stable@vger.kernel.org
Subject: Re: [PATCH] media: i2c: cvs: Leave the privacy LED to firmware on Synaptics SVP7xxx
Date: Fri, 9 Oct 2026 13:42:05 +0300	[thread overview]
Message-ID: <asjE_UdsewYa4kjz@alaakso-desk> (raw)
In-Reply-To: <20261008-cvs-privacy-led-v1-1-b78d5c512cba@gmail.com>

On Thu, Oct 08, 2026 at 08:39:37PM +0530, Praveen Puglia via B4 Relay wrote:
> From: Praveen Puglia <praveenpuglia@gmail.com>
> 
> The Synaptics SVP7xxx (06cb:0701) quirk sets ICVS_HOST_PRIV_CTRL, so
> SET_DEV_HOST_ID tells the CVS firmware that the host owns the privacy
> LED. Nothing in the driver drives it, though: V4L2_CID_PRIVACY is a
> read-only placeholder. The firmware then never turns the LED on and the
> camera streams with the LED off.
> 
> The host has no way to drive it on these machines either. On the Dell
> Pro Max 16 Premium (MA16250) the only camera LED that INT3472 exposes
> is the IR flood LED. The out-of-tree Intel vision driver sends
> privacy_led_host = 0 for this bridge, and the LED works there.
> 
> Drop ICVS_HOST_PRIV_CTRL from the quirk (quirks 0x7a -> 0x3a). The LED
> now turns on while streaming and the stream is unaffected.
> 
> Tested on a Dell Pro Max 16 Premium (MA16250) with v7.2.8.
> 
> Fixes: 8e2b43d2c10b ("media: i2c: cvs: Add driver of Intel Computer Vision Sensing Controller(CVS)")
> Cc: stable@vger.kernel.org
> Link: https://github.com/intel/ipu6-drivers/issues/417
> Assisted-by: Claude:claude-opus-5-5
> Signed-off-by: Praveen Puglia <praveenpuglia@gmail.com>
> ---
> This is my first kernel patch. I found and debugged this with an AI
> assistant (Claude), then verified it myself on the laptop: quirks read
> 0x3a, the LED turns on and off with streaming, and the stream is
> unchanged. Tested as a rebuilt module on Fedora's v7.2.8, not on
> v7.3-rc.
> 
> Marco Nenciarini reproduced this on the same laptop with Debian and
> v7.2.6, and found no host-controlled privacy LED pin in the DSDT/SSDTs:
> https://github.com/intel/ipu6-drivers/issues/417#issuecomment-5996738346
> ---
>  drivers/media/i2c/cvs/core.c | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/drivers/media/i2c/cvs/core.c b/drivers/media/i2c/cvs/core.c
> index d4a3b9c3ba..3520325717 100644
> --- a/drivers/media/i2c/cvs/core.c
> +++ b/drivers/media/i2c/cvs/core.c
> @@ -72,7 +72,6 @@ static const struct icvs_device_quirk cvs_quirk_table[] = {
>  	},	/* Lattice NX33 */
>  	{ 0x06CB, 0x0701, ICVS_SKIP_FW_RESET |
>  			  ICVS_HOST_SENSOR_PWR_CTRL |
> -			  ICVS_HOST_PRIV_CTRL |
>  			  ICVS_FW_BUF_SIZE_256 |
>  			  ICVS_FW_HEADER_SIZE_256
>  	},	/* Synaptics SVP7xxx */
> 
> ---
> base-commit: 47324d3a5b3abd781295044d01d92d09f184e872
> change-id: 20261008-cvs-privacy-led-7d0f2327c31f
> 
> Best regards,
> -- 
> Praveen Puglia <praveenpuglia@gmail.com>
> 

Tested-by: Antti Laakso <antti.laakso@linux.intel.com>

  parent reply	other threads:[~2026-10-09 10:42 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-08 15:09 Praveen Puglia via B4 Relay
2026-10-08 15:33 ` Marco Nenciarini
2026-10-09 10:42 ` Antti Laakso [this message]
2026-10-26 10:59   ` Praveen Puglia
2026-10-26 11:38     ` Sakari Ailus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=asjE_UdsewYa4kjz@alaakso-desk \
    --to=antti.laakso@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mehdi.djait@linux.intel.com \
    --cc=miguel.vadillo@intel.com \
    --cc=mnencia@kcore.it \
    --cc=praveenpuglia@gmail.com \
    --cc=sakari.ailus@linux.intel.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®