mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: amitsd@google.com
Cc: "Badhri Jagan Sridharan" <badhri@google.com>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	"André Draszik" <andre.draszik@linaro.org>,
	"RD Babiera" <rdbabiera@google.com>,
	"Kyle Tso" <kyletso@google.com>
Subject: Re: [PATCH v2 2/3] usb: typec: tcpci: implement get_current_limit
Date: Fri, 9 Oct 2026 13:33:35 +0200	[thread overview]
Message-ID: <asjRD28ogxDOtory@black.igk.intel.com> (raw)
In-Reply-To: <20261004-max77759-icl-typec-v2-2-866caf9e7d9a@google.com>

On Sun, Oct 04, 2026 at 03:41:00AM +0000, Amit Sunil Dhamne via B4 Relay wrote:
> From: Amit Sunil Dhamne <amitsd@google.com>
> 
> Implement a callback for tcpc_dev::get_current_limit. This acts like a
> conduit to relay the current limit information from chip level tcpc
> drivers.
> 
> This does not introduce any functional changes for chip level drivers
> that do not implement tcpci_data::get_current_limit.
> 
> Assisted-by: LLM
> Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
>  drivers/usb/typec/tcpm/tcpci.c | 14 ++++++++++++++
>  include/linux/usb/tcpci.h      |  6 ++++++
>  2 files changed, 20 insertions(+)
> 
> diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
> index 6717ac914c6a..f1bc1ac0a556 100644
> --- a/drivers/usb/typec/tcpm/tcpci.c
> +++ b/drivers/usb/typec/tcpm/tcpci.c
> @@ -250,6 +250,19 @@ static int tcpci_get_cc(struct tcpc_dev *tcpc,
>  	return 0;
>  }
>  
> +static int tcpci_get_current_limit(struct tcpc_dev *tcpc)
> +{
> +	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
> +	int ret;
> +
> +	if (!tcpci->data->get_current_limit)
> +		return 0;
> +
> +	ret = tcpci->data->get_current_limit(tcpci, tcpci->data);
> +
> +	return ret < 0 ? 0 : ret;
> +}
> +
>  static int tcpci_set_polarity(struct tcpc_dev *tcpc,
>  			      enum typec_cc_polarity polarity)
>  {
> @@ -861,6 +874,7 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data)
>  	tcpci->tcpc.set_cc = tcpci_set_cc;
>  	tcpci->tcpc.apply_rc = tcpci_apply_rc;
>  	tcpci->tcpc.get_cc = tcpci_get_cc;
> +	tcpci->tcpc.get_current_limit = tcpci_get_current_limit;
>  	tcpci->tcpc.set_polarity = tcpci_set_polarity;
>  	tcpci->tcpc.set_vconn = tcpci_set_vconn;
>  	tcpci->tcpc.start_toggling = tcpci_start_toggling;
> diff --git a/include/linux/usb/tcpci.h b/include/linux/usb/tcpci.h
> index 9b46a6bc762c..580fbdac7ede 100644
> --- a/include/linux/usb/tcpci.h
> +++ b/include/linux/usb/tcpci.h
> @@ -205,6 +205,11 @@ struct tcpci;
>   *		swap following Discover Identity on SOP' occurs.
>   *		Return true when the TCPM is allowed to request a Vconn swap
>   *		after Discovery Identity on SOP.
> + * @get_current_limit:
> + *		Optional; Called when the port is a sink and CC=Rp-def to obtain
> + *		the current limit. Chip level drivers can implement their own
> + *		detection and return the limit in mA, or 0 when it cannot be
> + *		determined.
>   * @set_orientation:
>   *		Optional; Enable setting the connector orientation
>   *		CONFIG_STANDARD_OUTPUT (0x18) bit0.
> @@ -228,6 +233,7 @@ struct tcpci_data {
>  					     bool capable);
>  	void (*check_contaminant)(struct tcpci *tcpci, struct tcpci_data *data);
>  	bool (*attempt_vconn_swap_discovery)(struct tcpci *tcpci, struct tcpci_data *data);
> +	int (*get_current_limit)(struct tcpci *tcpci, struct tcpci_data *data);
>  };
>  
>  struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data);
> 
> -- 
> 2.56.0.rc1.315.gc6ed9934b7-goog
> 

-- 
heikki

  reply	other threads:[~2026-10-09 11:33 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-04  3:40 [PATCH v2 0/3] usb: typec: report a current limit for non-PD Rp-def sources Amit Sunil Dhamne via B4 Relay
2026-10-04  3:40 ` [PATCH v2 1/3] usb: typec: tcpm: only call get_current_limit() for cc=Rp-def Amit Sunil Dhamne via B4 Relay
2026-10-09 11:33   ` Heikki Krogerus
2026-10-04  3:41 ` [PATCH v2 2/3] usb: typec: tcpci: implement get_current_limit Amit Sunil Dhamne via B4 Relay
2026-10-09 11:33   ` Heikki Krogerus [this message]
2026-10-04  3:41 ` [PATCH v2 3/3] usb: typec: tcpci_maxim: " Amit Sunil Dhamne via B4 Relay
2026-10-09 11:34   ` Heikki Krogerus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=asjRD28ogxDOtory@black.igk.intel.com \
    --to=heikki.krogerus@linux.intel.com \
    --cc=amitsd@google.com \
    --cc=andre.draszik@linaro.org \
    --cc=badhri@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kyletso@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=rdbabiera@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®