mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Lorenzo Stoakes (ARM)" <ljs@kernel.org>
To: samarth.colleges@gmail.com
Cc: akpm@linux-foundation.org, liam@infradead.org, david@kernel.org,
	 vbabka@kernel.org, jannh@google.com, linux-mm@kvack.org,
	 linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: Re: [PATCH] mm/madvise: keep the hardware dirty bit in MADV_COLD's THP path
Date: Mon, 12 Oct 2026 11:00:14 +0100	[thread overview]
Message-ID: <asyvgymRz9jtjWKz@gremlin> (raw)
In-Reply-To: <20261011132227.413217-1-samarth.colleges@gmail.com>

On Sun, Oct 11, 2026 at 06:22:27AM -0700, samarth.colleges@gmail.com wrote:
> From: Samarth Narang <samarth.colleges@gmail.com>
>
> For a young, PMD-mapped THP, madvise_cold_or_pageout_pte_range() handles
> MADV_COLD by reading orig_pmd = *pmd, calling pmdp_invalidate(),
> discarding its return value, and writing back pmd_mkold(orig_pmd):
>
> 	if (!pageout && pmd_young(orig_pmd)) {
> 		pmdp_invalidate(vma, addr, pmd);
> 		orig_pmd = pmd_mkold(orig_pmd);
> 		set_pmd_at(mm, addr, pmd, orig_pmd);
> 		tlb_remove_pmd_tlb_entry(tlb, pmd, addr);
> 	}
>
> pmdp_invalidate() atomically clears the present bit and returns the PMD
> as it was in the page table at that instant.  A store from another CPU
> that lands after orig_pmd is read but before the invalidate sets the
> hardware dirty bit in the live entry.  Because the written-back value is
> derived from the stale orig_pmd, that dirty bit is erased.
>
> If the THP had been marked lazyfree (MADV_FREE), reclaim later finds a
> clean PMD and a clean folio and discards it rather than swapping it out
> (__discard_anon_folio_pmd_locked()).  The store is then silently lost: a
> subsequent read returns stale/zero data, although the MADV_FREE contract
> is that a write after the advice call cancels the free.
>
> pmdp_invalidate() returns the pre-invalidate entry precisely so callers
> can carry the accessed/dirty bits hardware may have set concurrently
> (d52605d7cb30).  change_huge_pmd() and set_pmd_migration_entry()
> (8a8683ad9ba4) already do this; the MADV_COLD path does not.  Rebuild
> orig_pmd from the returned entry.
>
> Reproduced unprivileged on x86-64: a 2 MiB anon THP is marked MADV_FREE,
> then MADV_COLD races a store from another CPU, then MADV_PAGEOUT; the
> stored byte reads back zero.  On current mainline built and booted under
> KVM, the race lost 131 of 8000 stores before this patch and 0 of 8000
> after; a store-before-COLD control and a MADV_NORMAL control lose none.
>
> Fixes: 9c276cc65a58 ("mm: introduce MADV_COLD")
> Cc: stable@vger.kernel.org
> Signed-off-by: Samarth Narang <samarth.colleges@gmail.com>

Thanks for the report.

As this seems to be AI-generated, a member of the core team will take over
this.

> ---
>  mm/madvise.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/mm/madvise.c b/mm/madvise.c
> --- a/mm/madvise.c
> +++ b/mm/madvise.c
> @@ -426,8 +426,14 @@
>  		}
>
>  		if (!pageout && pmd_young(orig_pmd)) {
> -			pmdp_invalidate(vma, addr, pmd);
> -			orig_pmd = pmd_mkold(orig_pmd);
> +			/*
> +			 * Rebuild from the entry pmdp_invalidate() exchanged
> +			 * out, not from orig_pmd: hardware may have set the
> +			 * dirty bit since orig_pmd was read, and a MADV_FREE'd
> +			 * (lazyfree) THP whose dirty bit is lost is discarded
> +			 * by reclaim, silently dropping the store.
> +			 */
> +			orig_pmd = pmd_mkold(pmdp_invalidate(vma, addr, pmd));
>
>  			set_pmd_at(mm, addr, pmd, orig_pmd);
>  			tlb_remove_pmd_tlb_entry(tlb, pmd, addr);
> --
> 2.40.0

--
Cheers, Lorenzo

  reply	other threads:[~2026-10-12 10:00 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-11 13:22 samarth.colleges
2026-10-12 10:00 ` Lorenzo Stoakes (ARM) [this message]
2026-10-12 10:09 ` David Hildenbrand (Arm)
2026-10-12 10:33   ` Lorenzo Stoakes (ARM)
2026-10-12 10:38     ` Lorenzo Stoakes (ARM)
2026-10-12 15:17       ` Zi Yan
2026-10-12 15:26         ` Lorenzo Stoakes (ARM)
2026-10-12 19:02           ` Pedro Falcato
     [not found]   ` <CAAbz3fTZyeDL1Sy5FOxuJ8e0zgM5SJa1UKa7sk2apkaJFeeBaA@mail.gmail.com>
2026-10-12 20:00     ` Lorenzo Stoakes (ARM)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=asyvgymRz9jtjWKz@gremlin \
    --to=ljs@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=david@kernel.org \
    --cc=jannh@google.com \
    --cc=liam@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=samarth.colleges@gmail.com \
    --cc=stable@vger.kernel.org \
    --cc=vbabka@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®