From: Oliver Upton <oupton@kernel.org>
To: Fuad Tabba <fuad.tabba@linux.dev>
Cc: Marc Zyngier <maz@kernel.org>, Joey Gouly <joey.gouly@arm.com>,
Steffen Eiden <seiden@linux.ibm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Zenghui Yu <yuzenghui@huawei.com>,
Raghavendra Rao Ananta <rananta@google.com>,
Eric Auger <eric.auger@redhat.com>, Will Deacon <will@kernel.org>,
Fuad Tabba <tabba@google.com>,
kvmarm@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] KVM: arm64: vgic-v4: Don't allocate vPEs when userspace clears nASSGIcap
Date: Mon, 26 Oct 2026 12:39:21 -0700 [thread overview]
Message-ID: <at-saZT_ixQxsZIr@kernel.org> (raw)
In-Reply-To: <20261026152639.3926498-3-fuad.tabba@linux.dev>
Hi Fuad,
On Mon, Oct 26, 2026 at 03:26:39PM +0000, Fuad Tabba wrote:
> Since commit c652887a92887 ("KVM: arm64: vgic-v3: Allow userspace to
> write GICD_TYPER2.nASSGIcap"), userspace can disable vPE allocation for
> a VM on a GICv4.1 host with vSGIs by clearing nASSGIcap before the vgic
> is initialised. vgic_init() then skips vgic_v4_init(), and
> kvm_vgic_dist_destroy() skips vgic_v4_teardown(). vgic_its_create()
> still calls vgic_v4_init() for an ITS created after the vgic is
> initialised, though, and vgic_v4_init() allocates the vPEs and requests
> a doorbell IRQ for each vCPU. Destroying the VM leaks them, and leaves
> each doorbell handler registered with a vCPU that's about to be freed.
>
> Rather than gate on vgic_supports_direct_irqs(), which reads has_its
> before vgic_its_create() sets it, check for a cleared nASSGIcap in
> vgic_v4_init().
>
> Fixes: c652887a92887 ("KVM: arm64: vgic-v3: Allow userspace to write GICD_TYPER2.nASSGIcap")
> Cc: stable@vger.kernel.org
> Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
> ---
> arch/arm64/kvm/vgic/vgic-v4.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm64/kvm/vgic/vgic-v4.c b/arch/arm64/kvm/vgic/vgic-v4.c
> index a01de4de608a6..12a57921f6af3 100644
> --- a/arch/arm64/kvm/vgic/vgic-v4.c
> +++ b/arch/arm64/kvm/vgic/vgic-v4.c
> @@ -251,6 +251,10 @@ int vgic_v4_init(struct kvm *kvm)
> if (!kvm_vgic_global_state.has_gicv4 || dist->vgic_model != KVM_DEV_TYPE_ARM_VGIC_V3)
> return 0; /* Nothing to see here... move along. */
>
> + /* Userspace disabled vPE allocation by clearing nASSGIcap */
> + if (system_supports_direct_sgis() && !vgic_supports_direct_sgis(kvm))
> + return 0;
> +
Looking at both of the patches now, I'd rather we just fix the
predicates and use those to consistently gate GICv4. Untested as always:
diff --git a/arch/arm64/kvm/vgic/vgic-its.c b/arch/arm64/kvm/vgic/vgic-its.c
index 9e782a4fea7e..2b22f096a504 100644
--- a/arch/arm64/kvm/vgic/vgic-its.c
+++ b/arch/arm64/kvm/vgic/vgic-its.c
@@ -1866,9 +1866,16 @@ static int vgic_its_create(struct kvm_device *dev, u32 type)
mutex_lock(&dev->kvm->arch.config_lock);
+ /*
+ * Make an early indication that this VM has an ITS so calls to
+ * vgic_supports_direct_irqs() work as intended, rolling back state
+ * if we fail to setup GICv4.
+ */
+ dev->kvm->arch.vgic.has_its = true;
if (vgic_initialized(dev->kvm)) {
ret = vgic_v4_init(dev->kvm);
if (ret < 0) {
+ dev->kvm->arch.vgic.has_its = false;
mutex_unlock(&dev->kvm->arch.config_lock);
kfree(its);
return ret;
@@ -1893,7 +1900,6 @@ static int vgic_its_create(struct kvm_device *dev, u32 type)
xa_init(&its->translation_cache);
dev->kvm->arch.vgic.msis_require_devid = true;
- dev->kvm->arch.vgic.has_its = true;
its->enabled = false;
its->dev = dev;
diff --git a/arch/arm64/kvm/vgic/vgic-v4.c b/arch/arm64/kvm/vgic/vgic-v4.c
index ed236f083f0d..c65bd8783284 100644
--- a/arch/arm64/kvm/vgic/vgic-v4.c
+++ b/arch/arm64/kvm/vgic/vgic-v4.c
@@ -248,8 +248,8 @@ int vgic_v4_init(struct kvm *kvm)
lockdep_assert_held(&kvm->arch.config_lock);
- if (!kvm_vgic_global_state.has_gicv4)
- return 0; /* Nothing to see here... move along. */
+ if (!vgic_supports_direct_irqs(kvm))
+ return 0;
if (dist->its_vm.vpes)
return 0;
diff --git a/arch/arm64/kvm/vgic/vgic.h b/arch/arm64/kvm/vgic/vgic.h
index b71d486ae514..bd1614c9ff05 100644
--- a/arch/arm64/kvm/vgic/vgic.h
+++ b/arch/arm64/kvm/vgic/vgic.h
@@ -509,6 +509,10 @@ static inline bool vgic_supports_direct_irqs(struct kvm *kvm)
if (vgic_is_v5(kvm))
return true;
+ /* GICv2 never supports direct IRQs */
+ if (!vgic_is_v3(kvm))
+ return false;
+
return vgic_supports_direct_msis(kvm) || vgic_supports_direct_sgis(kvm);
}
--
Thanks,
Oliver
next prev parent reply other threads:[~2026-10-26 19:39 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-26 15:26 [PATCH 0/2] KVM: arm64: vgic-v4: Don't allocate vPEs that a VM can't use Fuad Tabba
2026-10-26 15:26 ` [PATCH 1/2] KVM: arm64: vgic-v4: Don't allocate vPEs for a GICv2 VM Fuad Tabba
2026-10-26 19:12 ` Oliver Upton
2026-10-26 19:55 ` Marc Zyngier
2026-10-26 21:30 ` Oliver Upton
2026-10-27 7:37 ` Fuad Tabba
2026-10-26 15:26 ` [PATCH 2/2] KVM: arm64: vgic-v4: Don't allocate vPEs when userspace clears nASSGIcap Fuad Tabba
2026-10-26 19:39 ` Oliver Upton [this message]
2026-10-27 7:36 ` Fuad Tabba
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=at-saZT_ixQxsZIr@kernel.org \
--to=oupton@kernel.org \
--cc=eric.auger@redhat.com \
--cc=fuad.tabba@linux.dev \
--cc=joey.gouly@arm.com \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maz@kernel.org \
--cc=rananta@google.com \
--cc=seiden@linux.ibm.com \
--cc=suzuki.poulose@arm.com \
--cc=tabba@google.com \
--cc=will@kernel.org \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®