mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Val Packett <val@packett.cool>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Luca Weiss <luca.weiss@fairphone.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	~postmarketos/upstreaming@lists.sr.ht,
	phone-devel@vger.kernel.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v2 2/2] usb: typec: fsa4480: Report switch & mux events to codec
Date: Mon, 26 Oct 2026 12:09:07 +0100	[thread overview]
Message-ID: <at800xHh8lvwsi-8@black.igk.intel.com> (raw)
In-Reply-To: <20261020081343.1507986-3-val@packett.cool>

On Tue, Oct 20, 2026 at 05:12:54AM -0300, Val Packett wrote:
> From: Luca Weiss <luca.weiss@fairphone.com>
> 
> In the Type-C graph, the FSA4480 switch is in between the USB-C connector
> and the audio codec, but the audio codec also needs to receive the
> switch and mux events from the FSA4480.
> 
> Update the driver to get an Type-C mux on the next endpoint and
> broadcast the recevied mux & switch state to it.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> [val: enable the SENSE/MIC bits; put the refs in fsa4480_remove]
> Signed-off-by: Val Packett <val@packett.cool>

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
>  drivers/usb/typec/mux/fsa4480.c | 57 +++++++++++++++++++++++++++++----
>  1 file changed, 50 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/usb/typec/mux/fsa4480.c b/drivers/usb/typec/mux/fsa4480.c
> index bea0c1deec94..93faa81d0879 100644
> --- a/drivers/usb/typec/mux/fsa4480.c
> +++ b/drivers/usb/typec/mux/fsa4480.c
> @@ -60,6 +60,9 @@ struct fsa4480 {
>  
>  	struct regmap *regmap;
>  
> +	struct typec_mux *codec;
> +	struct typec_switch *codec_switch;
> +
>  	enum typec_orientation orientation;
>  	unsigned long mode;
>  	unsigned int svid;
> @@ -115,7 +118,8 @@ static int fsa4480_set(struct fsa4480 *fsa)
>  		}
>  	} else if (fsa->mode == TYPEC_MODE_AUDIO) {
>  		/* Audio Accessory Mode, setup to auto Jack Detection */
> -		enable |= FSA4480_ENABLE_USB | FSA4480_ENABLE_AGND;
> +		enable |= FSA4480_ENABLE_USB | FSA4480_ENABLE_AGND |
> +			 FSA4480_ENABLE_SENSE | FSA4480_ENABLE_MIC;
>  	} else
>  		return -EOPNOTSUPP;
>  
> @@ -162,7 +166,11 @@ static int fsa4480_switch_set(struct typec_switch_dev *sw,
>  
>  	mutex_unlock(&fsa->lock);
>  
> -	return ret;
> +	if (ret)
> +		return ret;
> +
> +	/* Report orientation to codec after switch has been done */
> +	return typec_switch_set(fsa->codec_switch, orientation);
>  }
>  
>  static int fsa4480_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
> @@ -185,7 +193,11 @@ static int fsa4480_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *st
>  
>  	mutex_unlock(&fsa->lock);
>  
> -	return ret;
> +	if (ret)
> +		return ret;
> +
> +	/* Report event to codec after switch has been done */
> +	return typec_mux_set(fsa->codec, state);
>  }
>  
>  enum {
> @@ -287,6 +299,19 @@ static int fsa4480_probe(struct i2c_client *client)
>  		FIELD_GET(FSA4480_DEVICE_ID_REV_ID, val),
>  		FIELD_GET(FSA4480_DEVICE_ID_VENDOR_ID, val));
>  
> +	/* Get Codec's MUX & Switch devices */
> +	fsa->codec = fwnode_typec_mux_get(dev->fwnode);
> +	if (IS_ERR(fsa->codec))
> +		return dev_err_probe(dev, PTR_ERR(fsa->codec),
> +				     "failed to acquire codec mode-switch\n");
> +
> +	fsa->codec_switch = fwnode_typec_switch_get(dev->fwnode);
> +	if (IS_ERR(fsa->codec_switch)) {
> +		ret = dev_err_probe(dev, PTR_ERR(fsa->codec_switch),
> +				    "failed to acquire codec orientation-switch\n");
> +		goto err_put_mux;
> +	}
> +
>  	/* Safe mode */
>  	fsa->cur_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB;
>  	fsa->mode = TYPEC_STATE_SAFE;
> @@ -310,8 +335,11 @@ static int fsa4480_probe(struct i2c_client *client)
>  	sw_desc.set = fsa4480_switch_set;
>  
>  	fsa->sw = typec_switch_register(dev, &sw_desc);
> -	if (IS_ERR(fsa->sw))
> -		return dev_err_probe(dev, PTR_ERR(fsa->sw), "failed to register typec switch\n");
> +	if (IS_ERR(fsa->sw)) {
> +		ret = dev_err_probe(dev, PTR_ERR(fsa->sw),
> +				    "failed to register typec switch\n");
> +		goto err_put_switch;
> +	}
>  
>  	mux_desc.drvdata = fsa;
>  	mux_desc.fwnode = dev_fwnode(dev);
> @@ -319,18 +347,33 @@ static int fsa4480_probe(struct i2c_client *client)
>  
>  	fsa->mux = typec_mux_register(dev, &mux_desc);
>  	if (IS_ERR(fsa->mux)) {
> -		typec_switch_unregister(fsa->sw);
> -		return dev_err_probe(dev, PTR_ERR(fsa->mux), "failed to register typec mux\n");
> +		ret = dev_err_probe(dev, PTR_ERR(fsa->mux),
> +				    "failed to register typec mux\n");
> +		goto err_unregister_switch;
>  	}
>  
>  	i2c_set_clientdata(client, fsa);
>  	return 0;
> +
> +err_unregister_switch:
> +	typec_switch_unregister(fsa->sw);
> +
> +err_put_switch:
> +	typec_switch_put(fsa->codec_switch);
> +
> +err_put_mux:
> +	typec_mux_put(fsa->codec);
> +
> +	return ret;
>  }
>  
>  static void fsa4480_remove(struct i2c_client *client)
>  {
>  	struct fsa4480 *fsa = i2c_get_clientdata(client);
>  
> +	typec_mux_put(fsa->codec);
> +	typec_switch_put(fsa->codec_switch);
> +
>  	typec_mux_unregister(fsa->mux);
>  	typec_switch_unregister(fsa->sw);
>  }
> -- 
> 2.55.0

-- 
heikki

  reply	other threads:[~2026-10-26 11:09 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-20  8:12 [PATCH v2 0/2] usb: typec: fsa4480: Support reporting hotplug events to a codec Val Packett
2026-10-20  8:12 ` [PATCH v2 1/2] dt-bindings: usb: fsa4480: Add an optional audio port/endpoint Val Packett
2026-10-20  8:12 ` [PATCH v2 2/2] usb: typec: fsa4480: Report switch & mux events to codec Val Packett
2026-10-26 11:09   ` Heikki Krogerus [this message]
2026-10-26 13:14     ` Heikki Krogerus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=at800xHh8lvwsi-8@black.igk.intel.com \
    --to=heikki.krogerus@linux.intel.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=luca.weiss@fairphone.com \
    --cc=neil.armstrong@linaro.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=val@packett.cool \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®