Re: [PATCH] usb: typec: ucsi: Fix NULL pointer dereference in power level debugfs

[Heikki Krogerus <heikki.krogerus@linux.intel.com>]

On Sat, Oct 10, 2026 at 01:03:57PM +0100, Bertrand Jacquin wrote:
> ucsi_register() creates the debugfs entries right away, but
> ucsi->connector is only set by ucsi_init(), which runs later from
> ucsi->work and only publishes the connectors once the PPM has been
> reset and all ports are registered. Until then, or for good if init
> fails, ucsi->connector is NULL, yet the peak_current, avg_current and
> vbus_voltage show callbacks dereference it unconditionally.
> 
> On an Intel NUC13ANKi5 whose PPM never answers when CONFIG_ACPI_EC=n,
> reading those files after the failed init oopses:
> 
>   ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed
>   BUG: kernel NULL pointer dereference, address: 000000000000045c
>   #PF: supervisor read access in kernel mode
>   RIP: 0010:ucsi_debugfs_register+0x291/0x420 [typec_ucsi]
>   Call Trace:
>    <TASK>
>    seq_read_iter+0x1e4/0x4c0
>    seq_read+0x12b/0x160
>    full_proxy_read+0x9a/0x1f0
>    vfs_read+0xba/0x320
>    ksys_read+0x74/0x110
>    do_syscall_64+0x79/0x240
>    entry_SYSCALL_64_after_hwframe+0x71/0x79
> 
> Return -ENODEV from those callbacks while no connector is available.
> 
> Fixes: c851b71fd6cd ("usb: typec: ucsi: Add support for READ_POWER_LEVEL command")
> Cc: stable@vger.kernel.org
> Signed-off-by: Bertrand Jacquin <bertrand@jacquin.bzh>

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
>  drivers/usb/typec/ucsi/debugfs.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/usb/typec/ucsi/debugfs.c b/drivers/usb/typec/ucsi/debugfs.c
> index 77a0dd75edd3..911a151ac16a 100644
> --- a/drivers/usb/typec/ucsi/debugfs.c
> +++ b/drivers/usb/typec/ucsi/debugfs.c
> @@ -92,6 +92,9 @@ static int ucsi_peak_curr_show(struct seq_file *m, void *v)
>  {
>  	struct ucsi *ucsi = m->private;
>  
> +	if (!ucsi->connector)
> +		return -ENODEV;
> +
>  	seq_printf(m, "%u mA\n", ucsi->connector->peak_current);
>  	return 0;
>  }
> @@ -101,6 +104,9 @@ static int ucsi_avg_curr_show(struct seq_file *m, void *v)
>  {
>  	struct ucsi *ucsi = m->private;
>  
> +	if (!ucsi->connector)
> +		return -ENODEV;
> +
>  	seq_printf(m, "%u mA\n", ucsi->connector->avg_current);
>  	return 0;
>  }
> @@ -110,6 +116,9 @@ static int ucsi_vbus_volt_show(struct seq_file *m, void *v)
>  {
>  	struct ucsi *ucsi = m->private;
>  
> +	if (!ucsi->connector)
> +		return -ENODEV;
> +
>  	seq_printf(m, "%u mV\n", ucsi->connector->vbus_voltage);
>  	return 0;
>  }

-- 
heikki