From: Alison Schofield <alison.schofield@intel.com>
To: Richard Cheng <icheng@nvidia.com>
Cc: <dave@stgolabs.net>, <jic23@kernel.org>, <dave.jiang@intel.com>,
<vishal.l.verma@intel.com>, <iweiny@kernel.org>,
<ming.li@zohomail.com>, <gourry@gourry.net>, <rrichter@amd.com>,
<linux-cxl@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [RFC PATCH] cxl/region: Calculate peer distance only for reused targets
Date: Fri, 16 Oct 2026 17:30:14 -0700 [thread overview]
Message-ID: <atLBlibv3kbT7xv5@aschofie-mobl2.lan> (raw)
In-Reply-To: <20261015094059.46818-1-icheng@nvidia.com>
On Thu, Oct 15, 2026 at 05:40:59PM +0800, Richard Cheng wrote:
> This patch depends on Alison Schofield's v3 "cxl/region: Refactor
> cxl_port_setup_targets()" series [1], this is inspired from that serie
> as well, since her serie contains no functional change, I pull this one
> out as a standalone patch.
>
> cxl_switch_port_setup_targets() calculates peer distance before
> searching the existing targets. When the endpoint needs a new target,
> the calculated distance is never used.
>
> Move cxl_port_peer_distance() into the matching-target branch,
> immediately before check_last_peer(). This avoids unnecessary ancestor
> walks and per-port region lookups when adding distinct targets.
>
> [1]:
> https://lore.kernel.org/linux-cxl/cover.1791860305.git.alison.schofield@intel.com/
> Signed-off-by: Richard Cheng <icheng@nvidia.com>
> ---
> I don't have available HW for multi-way interleaving setup, so I can't
> exercise the case optimized here. I would appreciate if someone is
> williing to validate the actual benefit of this.
Nice patch! I've picked it up into v4 of the refactor set.
I tested it with using the cxl unit test cxl-region-sysfs.sh and this
at the end of cxl_port_peer_distance():
dev_dbg(&cxlr->dev, "%s:%s: peer distance %d\n",
dev_name(port->uport_dev), dev_name(&port->dev), distance);
The x8 region went from 10 calls to 4. The eliminated calls were for
new downstream targets and the remaining calls were for reused
targets where check_last_peer() needs the distance.
The x2 auto region also went from 2 calls to 1.
I tested the peer validation path by swapping endpoints at positions
0 and 2 in cxl-region-sysfs.sh. The mismatched peer was detected and
the region rejected.
-- Alison
>
> Best regards,
> Richard Cheng.
> ---
> drivers/cxl/core/region.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
> index 50f4830c225d..efd173c57dad 100644
> --- a/drivers/cxl/core/region.c
> +++ b/drivers/cxl/core/region.c
> @@ -1666,10 +1666,10 @@ static int cxl_switch_port_setup_targets(struct cxl_port *port, struct cxl_regio
>
> cxlsd = to_cxl_switch_decoder(&cxld->dev);
> if (cxl_rr->nr_targets_set) {
> - int distance = cxl_port_peer_distance(port, cxlr);
> -
> for (int i = 0; i < cxl_rr->nr_targets_set; i++)
> if (ep->dport == cxlsd->target[i]) {
> + int distance = cxl_port_peer_distance(port, cxlr);
> +
> rc = check_last_peer(cxled, ep, cxl_rr,
> distance);
> if (rc)
> --
> 2.43.0
>
prev parent reply other threads:[~2026-10-17 0:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-15 9:40 Richard Cheng
2026-10-16 18:23 ` Jonathan Cameron
2026-10-17 0:30 ` Alison Schofield [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=atLBlibv3kbT7xv5@aschofie-mobl2.lan \
--to=alison.schofield@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=gourry@gourry.net \
--cc=icheng@nvidia.com \
--cc=iweiny@kernel.org \
--cc=jic23@kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ming.li@zohomail.com \
--cc=rrichter@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®