mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@oss.nxp.com>
To: Chancel Liu <chancel.liu@oss.nxp.com>
Cc: Shengjiu Wang <shengjiu.wang@gmail.com>,
	Xiubo Li <Xiubo.Lee@gmail.com>,
	Fabio Estevam <festevam@gmail.com>,
	Nicolin Chen <nicoleotsuka@gmail.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>, Frank Li <Frank.Li@nxp.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	linux-sound@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
	imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Chancel Liu <chancel.liu@nxp.com>
Subject: Re: [PATCH] ASoC: imx-pcm-rpmsg: Flush pending work in hw_free
Date: Mon, 19 Oct 2026 15:42:29 -0500	[thread overview]
Message-ID: <ataAteh8BJKbhyOV@SMW015318> (raw)
In-Reply-To: <20261019-b4-imx-pcm-rpmsg-concurrent-v1-1-c1fb8c33f4db@nxp.com>

On Mon, Oct 19, 2026 at 03:58:20PM +0900, Chancel Liu wrote:
> From: Chancel Liu <chancel.liu@nxp.com>
>
> imx_rpmsg_terminate_all() queues the TERMINATE message to the workqueue
> and returns, while the DAI hw_free() synchronously gates the audio
> clock. The two can then run concurrently, and this concurrent access to
> the shared audio clock path can cause a stop failure or even hang the
> system.
>
> Flush the workqueue in a new component hw_free(), which runs before the
> DAI hw_free(), so TERMINATE is fully handled before the clock is gated.
> CLOSE stays the last message.
>
> Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  sound/soc/fsl/imx-pcm-rpmsg.c | 14 +++++++++++---
>  1 file changed, 11 insertions(+), 3 deletions(-)
>
> diff --git a/sound/soc/fsl/imx-pcm-rpmsg.c b/sound/soc/fsl/imx-pcm-rpmsg.c
> index 85b7c929a28a..6a0174d6c78d 100644
> --- a/sound/soc/fsl/imx-pcm-rpmsg.c
> +++ b/sound/soc/fsl/imx-pcm-rpmsg.c
> @@ -178,6 +178,16 @@ static int imx_rpmsg_pcm_hw_params(struct snd_soc_component *component,
>  	return 0;
>  }
>
> +static int imx_rpmsg_pcm_hw_free(struct snd_soc_component *component,
> +				 struct snd_pcm_substream *substream)
> +{
> +	struct rpmsg_info *info = dev_get_drvdata(component->dev);
> +
> +	flush_workqueue(info->rpmsg_wq);
> +
> +	return 0;
> +}
> +
>  static snd_pcm_uframes_t imx_rpmsg_pcm_pointer(struct snd_soc_component *component,
>  					       struct snd_pcm_substream *substream)
>  {
> @@ -285,9 +295,6 @@ static int imx_rpmsg_pcm_close(struct snd_soc_component *component,
>  	struct rpmsg_info *info = dev_get_drvdata(component->dev);
>  	struct rpmsg_msg *msg;
>
> -	/* Flush work in workqueue to make TX_CLOSE is the last message */
> -	flush_workqueue(info->rpmsg_wq);
> -
>  	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
>  		msg = &info->msg[TX_CLOSE];
>  		msg->s_msg.header.cmd = TX_CLOSE;
> @@ -624,6 +631,7 @@ static const struct snd_soc_component_driver imx_rpmsg_soc_component = {
>  	.open		= imx_rpmsg_pcm_open,
>  	.close		= imx_rpmsg_pcm_close,
>  	.hw_params	= imx_rpmsg_pcm_hw_params,
> +	.hw_free	= imx_rpmsg_pcm_hw_free,
>  	.trigger	= imx_rpmsg_pcm_trigger,
>  	.pointer	= imx_rpmsg_pcm_pointer,
>  	.ack		= imx_rpmsg_pcm_ack,
>
> ---
> base-commit: 8d00cfd77ffa64477129969eec8249c8cdadc9c2
> change-id: 20261019-b4-imx-pcm-rpmsg-concurrent-1522959ba768
>
> Best regards,
> --
> Chancel Liu <chancel.liu@nxp.com>
>
>

      reply	other threads:[~2026-10-19 20:42 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-19  6:58 Chancel Liu
2026-10-19 20:42 ` Frank Li [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ataAteh8BJKbhyOV@SMW015318 \
    --to=frank.li@oss.nxp.com \
    --cc=Frank.Li@nxp.com \
    --cc=Xiubo.Lee@gmail.com \
    --cc=broonie@kernel.org \
    --cc=chancel.liu@nxp.com \
    --cc=chancel.liu@oss.nxp.com \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=perex@perex.cz \
    --cc=s.hauer@pengutronix.de \
    --cc=shengjiu.wang@gmail.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®