On Wed, Oct 21, 2026 at 04:37:12PM +0800, lianfeng.ouyang wrote:
> From: Lianfeng Ouyang <lianfeng.ouyang@starfivetech.com>
> 
> Rework the StarFive TRNG driver to address hardware-specific requirements
>   for JHB100 SoC. To avoid reset-domain crossing glitches, the driver now
>   ensures clocks are gated before asserting reset during teardown for
>   JHB100, while JH7110 retains the original reset-first sequence.
> 
> Add per-compatible match data (struct starfive_trng_data) describing the
>   clock/reset teardown order, a new "starfive,jhb100-trng" compatible, and
>   select the ordering from it.
> 
> Fix the runtime-PM get/put balancing across the init/read/reseed/cleanup
>   paths, manage PM and the clk/reset teardown via devm so all error paths
>   unwind correctly, run the SEU-triggered reseed from a workqueue instead
>   of hard IRQ, and serialise the command sequences with a mutex.

This sounds like three commits, with at least the third getting a Fixes:
line.
 
> +#include <linux/bits.h>
>  #include <linux/clk.h>
>  #include <linux/completion.h>
> -#include <linux/delay.h>
> +#include <linux/container_of.h>
> +#include <linux/device.h>
> +#include <linux/devm-helpers.h>
>  #include <linux/err.h>
> +#include <linux/errno.h>
>  #include <linux/hw_random.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
>  #include <linux/iopoll.h>
> -#include <linux/kernel.h>
> +#include <linux/jiffies.h>
> +#include <linux/lockdep.h>
> +#include <linux/minmax.h>
> +#include <linux/mod_devicetable.h>

Please don't add <linux/mod_devicetable.h>. <linux/platform_device.h>
already provides of_device_id, so just dropping
<linux/mod_devicetable.h> should work fine.

>  #include <linux/module.h>
> -#include <linux/of.h>
> +#include <linux/mutex.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
> -#include <linux/random.h>
> +#include <linux/property.h>
>  #include <linux/reset.h>
> +#include <linux/types.h>
> +#include <linux/workqueue.h>

All that header rearrangement is worth pointing out in the commit log.

Best regards
Uwe