On Thu, Nov 05, 2026 at 04:05:02PM +0200, Svyatoslav Ryhel wrote:
> Switch from a generic platform driver to a dedicated MIPI DBI driver.
> 
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
>  .../drm/panel/panel-hitachi-tx10d07vm0baa.c   | 167 ++++++++----------
>  1 file changed, 78 insertions(+), 89 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-hitachi-tx10d07vm0baa.c b/drivers/gpu/drm/panel/panel-hitachi-tx10d07vm0baa.c
> index 83c2af1be9755..d5d7ba2096608 100644
> --- a/drivers/gpu/drm/panel/panel-hitachi-tx10d07vm0baa.c
> +++ b/drivers/gpu/drm/panel/panel-hitachi-tx10d07vm0baa.c
> @@ -14,6 +14,7 @@
>  #include <video/mipi_display.h>
>  
>  #include <drm/drm_mipi_dbi.h>
> +#include <drm/drm_mipi_dbi_bus.h>
>  #include <drm/drm_modes.h>
>  #include <drm/drm_of.h>
>  #include <drm/drm_panel.h>
> @@ -25,7 +26,7 @@ static const struct regulator_bulk_data hitachi_tx10d07vm0baa_supplies[] = {
>  
>  struct hitachi_tx10d07vm0baa {
>  	struct drm_panel panel;
> -	struct mipi_dbi *dbi;
> +	struct mipi_dbi_device *dbi;

It's somewhat difficult to exactly see the difference between mipi_dbi
and mipi_dbi_device. Maybe that should be explained better in the cover
letter of patch 1? Or the documentation added in patch1.

>  
>  	struct regulator_bulk_data *supplies;
>  	struct gpio_desc *reset_gpio;
> @@ -36,13 +37,12 @@ static inline struct hitachi_tx10d07vm0baa *to_hitachi_tx10d07vm0baa(struct drm_
>  	return container_of(panel, struct hitachi_tx10d07vm0baa, panel);
>  }
>  
> -#define panel_dbi_command(priv, cmd, seq...) \
> +#define panel_dbi_command(dbidev, cmd, seq...) \
>  ({ \
>  	const u8 d[] = { seq }; \
> -	struct drm_panel *panel = &(priv)->panel; \
> -	struct device *dev = panel->dev; \
> +	struct device *dev = &(dbidev)->dev; \
>  	int ret; \
> -	ret = mipi_dbi_command_stackbuf((priv)->dbi, cmd, d, ARRAY_SIZE(d)); \
> +	ret = mipi_dbi_command_stackbuf((dbidev)->dbi, cmd, d, ARRAY_SIZE(d)); \
>  	if (ret) \
>  		dev_err_ratelimited(dev, "error %d when sending command %#02x\n", ret, cmd); \
>  	ret; \
> @@ -54,10 +54,6 @@ static int hitachi_tx10d07vm0baa_prepare(struct drm_panel *panel)
>  	struct device *dev = panel->dev;
>  	int ret;
>  
> -	priv->dbi = dev_get_drvdata(dev->parent);
> -	if (!priv->dbi)
> -		return -ENODEV;
> -
>  	gpiod_set_value_cansleep(priv->reset_gpio, 1);
>  
>  	ret = regulator_bulk_enable(ARRAY_SIZE(hitachi_tx10d07vm0baa_supplies), priv->supplies);
> @@ -79,123 +75,116 @@ static int hitachi_tx10d07vm0baa_enable(struct drm_panel *panel)
>  {
>  	struct hitachi_tx10d07vm0baa *priv = to_hitachi_tx10d07vm0baa(panel);
>  
> -	panel_dbi_command(priv, MIPI_DCS_SET_PARTIAL_ROWS, 0x00, 0x00, 0x03, 0x1f);
> -	panel_dbi_command(priv, MIPI_DCS_SET_SCROLL_AREA, 0x00, 0x00, 0x03, 0x20,
> +	panel_dbi_command(priv->dbi, MIPI_DCS_SET_PARTIAL_ROWS, 0x00, 0x00, 0x03, 0x1f);
> +	panel_dbi_command(priv->dbi, MIPI_DCS_SET_SCROLL_AREA, 0x00, 0x00, 0x03, 0x20,
>  			  0x00, 0x00);

The majority of the changes in this file are s/priv/priv->dbi/, so maybe
just make it so that priv = priv->db and keep the changes to a minimum?

Thierry