From: "Lorenzo Stoakes (ARM)" <ljs@kernel.org>
To: Zi Yan <ziy@nvidia.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
David Hildenbrand <david@kernel.org>,
"Liam R. Howlett" <liam@infradead.org>,
Vlastimil Babka <vbabka@kernel.org>,
Mike Rapoport <rppt@kernel.org>,
Suren Baghdasaryan <surenb@google.com>,
Michal Hocko <mhocko@suse.com>,
Baolin Wang <baolin.wang@linux.alibaba.com>,
Nico Pache <nico.pache@linux.dev>,
Ryan Roberts <ryan.roberts@arm.com>, Dev Jain <dev.jain@arm.com>,
Barry Song <baohua@kernel.org>,
Lance Yang <lance.yang@linux.dev>,
Usama Arif <usama.arif@linux.dev>,
Kiryl Shutsemau <kas@kernel.org>,
Brendan Jackman <brendan.jackman@linux.dev>,
Johannes Weiner <hannes@cmpxchg.org>, Ye Liu <ye.liu@linux.dev>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: Re: [PATCH] mm/huge_memory: prevent losing PG_waiters in __split_folio_to_order()
Date: Fri, 6 Nov 2026 16:48:46 +0000 [thread overview]
Message-ID: <au4A9Jx9_1PjpRCb@gremlin> (raw)
In-Reply-To: <20261029-fix-split_folio_to_order-race-v1-1-a483c7451b0d@nvidia.com>
On Thu, Oct 29, 2026 at 10:08:44PM -0400, Zi Yan wrote:
> __split_folio_to_order() calls prep_compound_page() on each new head page
> to create a compound page after clear_compound_head(). prep_compound_page()
> uses non atomic __SetPageHead(). It is mostly OK, since the folio is locked
> and frozen and no one else is supposed to modify the folio's flags.
>
> However, code calling migration_entry_wait() can reach the folio by PFN,
> then access its flags. It is because softleaf_entry_wait_on_locked() used
Oh fun.
> by migration_entry_wait() sets PG_waiters concurrently without taking a
> reference and the frozen refcount during split cannot block it. Meanwhile,
> __SetPageHead() does a plain read and write, so PG_waiters atomically set
> by softleaf_entry_wait_on_locked() will be lost if the set happens after
> __SetPageHead()'s read and before its write.
>
> One example code interleaving:
>
> CPU0: __split_folio_to_order(new_order>0) CPU1: do_swap_page()
>
> 1. clear_compound_head(new_head)
> new_head->compound_info = 0
> (page_folio(new_head) == new_head now)
>
> 2. migration_entry_wait()
> softleaf_to_folio(entry)
> page_folio() -> new_head
> (not the old head any more)
>
> 3. prep_compound_page(new_head, new_order)
> __SetPageHead(new_head)
> tmp = new_head->flags.f <-- load; PG_waiters == 0 in tmp
>
> 4. folio_set_waiters(new_head)
> set_bit(PG_waiters, &flags.f)
> enqueue on waitqueue, sleep
>
> 5. new_head->flags.f = tmp | (1UL << PG_head)
> <-- store; overwrites step 4, PG_waiters == 0 again
>
> Later, folio_unlock(new_folio) sees no PG_waiters, skips folio_wake_bit(),
> and CPU1 can remain blocked indefinitely.
>
> Fix it by adding the atomic version SetPageHead() and
> prep_compound_page_atomic() using it. __split_folio_to_order() uses
> prep_compound_page_atomic() to avoid the issue without adding an atomic ops
> to other prep_compound_page() users.
>
> Reported-by: David Hildenbrand <david@kernel.org>
> Closes: https://lore.kernel.org/all/DMHE8BEEER1H.2BIY52NXATPIA@nvidia.com/
> Fixes: c010d47f107f6 ("mm: thp: split huge page to any lower order pages")
> Signed-off-by: Zi Yan <ziy@nvidia.com>
Nasty one. Some nits below but change looks sensible to me so:
Acked-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
BTW AI flags an hw poison thing doing the same:
memory_failure() does TestSetPageHWPoison(p) on an arbitrary subpage before
taking a reference (mm/memory-failure.c:2458), which races the same way with the
plain flag clone and with folio_set_order()'s plain _flags_1 store.
> Cc: stable@vger.kernel.org
> ---
> The issue was raised by David when reviewing Ye Liu's "mm/huge_memory: use
> READ_ONCE() when cloning folio flags during split" [1].
>
> [1] https://lore.kernel.org/all/20261029-data_race_huge_mem-v1-1-112e331291c1@linux.dev/
> ---
> include/linux/page-flags.h | 1 +
> mm/huge_memory.c | 10 +++++++++-
> mm/internal.h | 2 ++
> mm/page_alloc.c | 20 ++++++++++++++++++--
> 4 files changed, 30 insertions(+), 3 deletions(-)
>
> diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
> index b0ddc652e76cc..08492ab3da895 100644
> --- a/include/linux/page-flags.h
> +++ b/include/linux/page-flags.h
> @@ -854,6 +854,7 @@ static __always_inline int PageHead(const struct page *page)
> return test_bit(PG_head, &page->flags.f);
> }
>
> +SETPAGEFLAG(Head, head, PF_ANY)
> __SETPAGEFLAG(Head, head, PF_ANY)
> __CLEARPAGEFLAG(Head, head, PF_ANY)
> CLEARPAGEFLAG(Head, head, PF_ANY)
> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> index bd44d58e86845..319b038eba89d 100644
> --- a/mm/huge_memory.c
> +++ b/mm/huge_memory.c
> @@ -3779,7 +3779,15 @@ static void __split_folio_to_order(struct folio *folio, int old_order,
> */
> clear_compound_head(new_head);
> if (new_order) {
> - prep_compound_page(new_head, new_order);
> + /*
> + * new_head is recognized as a folio after
> + * clear_compound_head().
> + * softleaf_entry_wait_on_locked() can set PG_waiters
> + * on it without taking a reference, so its frozen state
> + * cannot prevent it. Use the atomic version to avoid
> + * losing a concurrently set PG_waiters.
> + */
> + prep_compound_page_atomic(new_head, new_order);
> folio_set_large_rmappable(new_folio);
> }
>
> diff --git a/mm/internal.h b/mm/internal.h
> index aeebb3e49ed11..9b8864a8540aa 100644
> --- a/mm/internal.h
> +++ b/mm/internal.h
> @@ -807,6 +807,8 @@ static inline void prep_compound_tail(struct page *tail,
> VM_WARN_ON_ONCE(tail->private);
> }
>
> +void prep_compound_page_atomic(struct page *page, unsigned int order);
> +
> #if defined CONFIG_COMPACTION || defined CONFIG_CMA
>
> /*
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index 143776e671abb..ace1359468046 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -682,18 +682,34 @@ static inline bool pcp_allowed_order(unsigned int order)
> * This usage means that zero-order pages may not be compound.
> */
>
> -void prep_compound_page(struct page *page, unsigned int order)
> +static void __prep_compound_head_and_tail(struct page *page, unsigned int order)
NIT: can this just be __prepare_compound_page()? I find the head + tail bit
quite confusing. The __ implies it's an internal function.
> {
> int i;
> int nr_pages = 1 << order;
>
> - __SetPageHead(page);
> for (i = 1; i < nr_pages; i++)
> prep_compound_tail(page + i, page, order);
>
> prep_compound_head(page, order);
> }
>
NIT: Maybe add a comment describing this like prep_compound_page_atomic()?
> +void prep_compound_page(struct page *page, unsigned int order)
> +{
> + __SetPageHead(page);
> + __prep_compound_head_and_tail(page, order);
> +}
> +
> +/*
> + * PG_head is set atomically whereas the other metadata is set with plain stores.
> + * It should be used when @page's flags can be modified concurrently,
> + * e.g., in __split_folio_to_order().
> + */
> +void prep_compound_page_atomic(struct page *page, unsigned int order)
> +{
> + SetPageHead(page);
> + __prep_compound_head_and_tail(page, order);
> +}
> +
> static inline void set_buddy_order(struct page *page, unsigned int order)
> {
> set_page_private(page, order);
>
> ---
> base-commit: d865f2677c44cb2171b833d6775cf692756fa8be
> change-id: 20261029-fix-split_folio_to_order-race-087a2a9fbf7c
>
> Best regards,
> --
> Yan, Zi
>
--
Cheers, Lorenzo
next prev parent reply other threads:[~2026-11-06 16:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-30 2:08 Zi Yan
2026-11-06 16:48 ` Lorenzo Stoakes (ARM) [this message]
2026-11-06 16:55 ` Zi Yan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=au4A9Jx9_1PjpRCb@gremlin \
--to=ljs@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=baohua@kernel.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=brendan.jackman@linux.dev \
--cc=david@kernel.org \
--cc=dev.jain@arm.com \
--cc=hannes@cmpxchg.org \
--cc=kas@kernel.org \
--cc=lance.yang@linux.dev \
--cc=liam@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.com \
--cc=nico.pache@linux.dev \
--cc=rppt@kernel.org \
--cc=ryan.roberts@arm.com \
--cc=stable@vger.kernel.org \
--cc=surenb@google.com \
--cc=usama.arif@linux.dev \
--cc=vbabka@kernel.org \
--cc=ye.liu@linux.dev \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®