From: "Nuno Sá" <nuno.sa@analog.com>
To: Yuehong Wu <wuyuehong@cmss.chinamobile.com>
Cc: netdev@vger.kernel.org, Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Kees Cook <kees@kernel.org>,
Heiner Kallweit <hkallweit1@gmail.com>,
Chen Ni <nichen@iscas.ac.cn>,
Alexandru Tachici <alexandru.tachici@analog.com>,
Lennart Franzen <lennart@lfdomain.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH net v3] net: ethernet: adi: adin1110: mask the RX IRQ of the port being stopped
Date: Fri, 6 Nov 2026 17:00:05 +0000 [thread overview]
Message-ID: <au4HUh8r06PzhnZO@nsa> (raw)
In-Reply-To: <20261106-adin1110-net-stop-v3-1-yuehongwu@cmss.chinamobile.com>
On Fri, Nov 06, 2026 at 10:02:51AM +0800, Yuehong Wu wrote:
> adin1110_net_stop() programs the RX-ready interrupt mask of the wrong
> port: it uses ADIN2111_RX_RDY_IRQ (the second port's bit) when stopping
> port 0 and ADIN1110_RX_RDY_IRQ (the first port's bit) when stopping
> port 1, while adin1110_port_rx_ready() uses the opposite mapping, port 0
> -> ADIN1110_RX_RDY and port 1 -> ADIN2111_P2_RX_RDY.
>
> The port being stopped therefore keeps its own RX interrupt enabled
> while the peer's is masked. On ADIN2111 that stalls RX on the peer port;
> on ADIN1110 the RX interrupt is never masked at all. As the interrupt is
> level triggered and adin1110_read_frames() skips the FIFO while
> netif_oper_up() is false, the stopped port also keeps re-raising its
> interrupt with nobody draining the FIFO.
>
> Swap the two bits so the port being stopped masks its own interrupt.
>
> Found by code review while comparing the bit mapping against
> adin1110_port_rx_ready(). I do not have access to ADIN1110 or ADIN2111
> hardware, so this was only compile-tested (CONFIG_ADIN1110=m, x86_64),
> not exercised on a device.
>
> Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support")
> Signed-off-by: Yuehong Wu <wuyuehong@cmss.chinamobile.com>
> ---
LGTM. But looking at the commit message, I suspect you're also missing
an Assisted-by tag :). Anyways:
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
> v2 -> v3: no code change. Cc the ADI commit-signers that
> get_maintainer.pl reports once a git history is available (Nuno Sa,
> Heiner Kallweit, Chen Ni). Thanks to Andrew Lunn for pointing out that
> Nuno was missing.
>
> v2:
> - Cc the netdev maintainers, as flagged by the cc_maintainers CI check on v1.
> - Explain how the issue was found and that the change was only compile-tested,
> no hardware access (netdev guideline for patches found by code review).
> v1: https://lore.kernel.org/all/20261103-adin1110-net-stop-1-yuehongwu@cmss.chinamobile.com/
>
> drivers/net/ethernet/adi/adin1110.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/adi/adin1110.c b/drivers/net/ethernet/adi/adin1110.c
> index 53fac3d..abdc160 100644
> --- a/drivers/net/ethernet/adi/adin1110.c
> +++ b/drivers/net/ethernet/adi/adin1110.c
> @@ -945,7 +945,7 @@ static int adin1110_net_stop(struct net_device *net_dev)
> u32 mask;
> int ret;
>
> - mask = !port_priv->nr ? ADIN2111_RX_RDY_IRQ : ADIN1110_RX_RDY_IRQ;
> + mask = !port_priv->nr ? ADIN1110_RX_RDY_IRQ : ADIN2111_RX_RDY_IRQ;
>
> /* Disable RX RDY IRQs */
> mutex_lock(&priv->lock);
> --
> 2.43.0
>
>
>
prev parent reply other threads:[~2026-11-06 17:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-06 2:02 Yuehong Wu
2026-11-06 17:00 ` Nuno Sá [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=au4HUh8r06PzhnZO@nsa \
--to=nuno.sa@analog.com \
--cc=alexandru.tachici@analog.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=hkallweit1@gmail.com \
--cc=kees@kernel.org \
--cc=kuba@kernel.org \
--cc=lennart@lfdomain.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nichen@iscas.ac.cn \
--cc=pabeni@redhat.com \
--cc=wuyuehong@cmss.chinamobile.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®