From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Mark Pearson <mpearson-lenovo@squebb.ca>
Cc: kernel@resetko.pl, Greg KH <gregkh@linuxfoundation.org>,
Guenter Roeck <linux@roeck-us.net>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Daniel Dev <daniel.dev@noex.uk>,
stable@vger.kernel.org
Subject: Re: [PATCH v2 2/2] usb: typec: ucsi: acpi: Assume UCSI 1.2 on Lenovo ThinkPad T14 Gen 2a
Date: Fri, 6 Nov 2026 19:03:23 +0100 [thread overview]
Message-ID: <au4Wa_xIfLp0UFjq@black.igk.intel.com> (raw)
In-Reply-To: <79fec522-e734-4194-bf1d-57b1cb0b67c1@app.fastmail.com>
On Fri, Nov 06, 2026 at 12:54:27PM -0500, Mark Pearson wrote:
>
>
> On Fri, Nov 6, 2026, at 11:54 AM, Heikki Krogerus wrote:
> > On Tue, Nov 03, 2026 at 05:10:21PM +0100, Stanisław Titenko via B4 Relay wrote:
> >> From: Stanisław Titenko <kernel@resetko.pl>
> >>
> >> The Lenovo ThinkPad T14 Gen 2a exposes a functional UCSI ACPI PPM but
> >> the firmware leaves the VERSION field of the UCSI mailbox at zero.
> >>
> >> ucsi_register() rejects a zero version with -ENODEV, leaving the
> >> system without registered USB Type-C connectors. Without an OPM, the
> >> embedded controller does not complete DisplayPort Alternate Mode setup
> >> when a USB-C dock or monitor that supplies power is connected after
> >> boot, so the display stays dark while USB and charging work.
> >>
> >> Use the zero version quirk for the ThinkPad T14 Gen 2a, matching the
> >> two board names of this model (20XK and 20XL).
> >
> > So is the product family the same?
> >
> > Could you use DMI_MATCH(DMI_PRODUCT_FAMILY... instead of adding
> > separate matches entry for both?
> >
>
> The board names are what I recommended - they are pretty safe to guarantee
> they won't change whereas other fields are less guaranteed (guidance given by
> FW team). It is annoying there are two I know.
Okay, thanks. I had to double check. I guess you guys already talked
about this. Sorry about the noise.
> FWIW I would rather wait for confirmation from the FW team if they will fix
> this before accepting the quirk. I am still waiting for a reply from them
> though I'm afraid.
Makes sense.
Thanks,
> >> Tested on a ThinkPad T14 Gen 2a (20XK) with BIOS 1.33 (R1MET63W):
> >> both Type-C connectors register, and plugging and replugging a USB-C
> >> monitor with an integrated hub and power delivery brings up
> >> DisplayPort Alternate Mode each time.
> >>
> >> Reported-by: Daniel Dev <daniel.dev@noex.uk>
> >> Closes: https://lore.kernel.org/linux-usb/b1Wn_eFvTFShGbd970WWl4CWhge_6P2x7Wb6rab3QHNlE4OJ4p__O-QN3B6I-308ftr5oV5Zr7vywA0vdvmtNw6E0YJnVM2ek_5DcFnkXB0=@noex.uk/
> >> Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface")
> >> Cc: stable@vger.kernel.org
> >> Assisted-by: pi:claude-opus-5-5
> >> Signed-off-by: Stanisław Titenko <kernel@resetko.pl>
> >
> > Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> >
> >> ---
> >> drivers/usb/typec/ucsi/ucsi_acpi.c | 16 ++++++++++++++++
> >> 1 file changed, 16 insertions(+)
> >>
> >> diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c
> >> index 47ba0e15b8ba..d752fc7b61ec 100644
> >> --- a/drivers/usb/typec/ucsi/ucsi_acpi.c
> >> +++ b/drivers/usb/typec/ucsi/ucsi_acpi.c
> >> @@ -196,6 +196,22 @@ static const struct dmi_system_id ucsi_acpi_quirks[] = {
> >> },
> >> .driver_data = (void *)&ucsi_zero_version_ops,
> >> },
> >> + {
> >> + /* Lenovo ThinkPad T14 Gen 2a */
> >> + .matches = {
> >> + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
> >> + DMI_MATCH(DMI_BOARD_NAME, "20XK"),
> >> + },
> >> + .driver_data = (void *)&ucsi_zero_version_ops,
> >> + },
> >> + {
> >> + /* Lenovo ThinkPad T14 Gen 2a */
> >> + .matches = {
> >> + DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
> >> + DMI_MATCH(DMI_BOARD_NAME, "20XL"),
> >> + },
> >> + .driver_data = (void *)&ucsi_zero_version_ops,
> >> + },
> >> {
> >> .matches = {
> >> DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
> >>
> >> --
> >> 2.56.0
> >>
> >
> > --
> > heikki
--
heikki
prev parent reply other threads:[~2026-11-06 18:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-03 16:10 [PATCH v2 0/2] usb: typec: ucsi: acpi: Zero version quirk for " Stanisław Titenko via B4 Relay
2026-11-03 16:10 ` [PATCH v2 1/2] usb: typec: ucsi: acpi: Rename the Acer zero version quirk Stanisław Titenko via B4 Relay
2026-11-06 16:42 ` Heikki Krogerus
2026-11-03 16:10 ` [PATCH v2 2/2] usb: typec: ucsi: acpi: Assume UCSI 1.2 on Lenovo ThinkPad T14 Gen 2a Stanisław Titenko via B4 Relay
2026-11-06 16:54 ` Heikki Krogerus
2026-11-06 17:54 ` Mark Pearson
2026-11-06 18:03 ` Heikki Krogerus [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=au4Wa_xIfLp0UFjq@black.igk.intel.com \
--to=heikki.krogerus@linux.intel.com \
--cc=daniel.dev@noex.uk \
--cc=gregkh@linuxfoundation.org \
--cc=kernel@resetko.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mpearson-lenovo@squebb.ca \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®