From: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
To: <marcin.knap@vecima.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>,
Przemek Kitszel <przemyslaw.kitszel@intel.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
"Jakub Kicinski" <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Magnus Karlsson <magnus.karlsson@intel.com>,
Stanislav Fomichev <sdf@fomichev.me>,
"Simon Horman" <horms@kernel.org>,
Alexei Starovoitov <ast@kernel.org>,
"Daniel Borkmann" <daniel@iogearbox.net>,
Jesper Dangaard Brouer <hawk@kernel.org>,
John Fastabend <john.fastabend@gmail.com>, <jtollet@cisco.com>,
<intel-wired-lan@lists.osuosl.org>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <bpf@vger.kernel.org>,
Joshua Washington <joshwash@google.com>,
Harshitha Ramamurthy <hramamurthy@google.com>,
"Sunil Goutham" <sgoutham@marvell.com>,
Geetha sowjanya <gakula@marvell.com>,
Ratheesh Kannoth <rkannoth@marvell.com>,
Subbaraya Sundeep <sbhatta@marvell.com>,
Bharat Bhushan <bbhushan2@marvell.com>
Subject: Re: [PATCH bpf v2] xsk: Do not free ZC Rx buffer when the Rx ring is full
Date: Fri, 30 Oct 2026 13:55:47 +0100 [thread overview]
Message-ID: <auST0y4PEYkdewpa@boxer> (raw)
In-Reply-To: <20261030-xsk-zc-rx-double-free-v2-1-cf01d4a9f3f7@vecima.com>
On Fri, Oct 30, 2026 at 09:14:17AM +0100, Marcin Knap via B4 Relay wrote:
> From: Marcin Knap <marcin.knap@vecima.com>
>
> When an XDP program redirects a zero-copy buffer to an XSK and the
> socket's Rx ring is full, xsk_rcv_zc() frees the buffer and returns
> -ENOBUFS to xdp_do_redirect().
>
> A failed xdp_do_redirect() leaves the buffer owned by the caller, and
> most drivers rely on that: mlx5e treats the failure as XDP_DROP and
> releases the buffer when the Rx WQE is refilled, while i40e, ice,
> ixgbe, igb, igc, stmmac, idpf and others free it themselves. The
> buffer is therefore freed twice. It gets reused for another Rx
> descriptor, the second free puts an in-use buffer back on the pool
> free list, and the same UMEM frame is later handed to user space
> twice. ixgbe and igb keep the buffer in the ring on their need_wakeup
> -ENOBUFS (XDP_EXIT) path and run it through XDP again on the next poll,
> after the core has freed it.
>
> Leave the buffer with the caller on both the single-buffer and the
> multi-buffer -ENOBUFS paths, as xsk_rcv() and xsk_rcv_check() already
> do. A few drivers relied on the core freeing the buffer, so make them
> free it:
>
> - i40e and ice consume the descriptor on XDP_EXIT without freeing it.
> - gve DQO counts the redirect error without freeing the buffer.
> - octeontx2 returns false on a failed redirect, so the caller goes on
> to build an skb from the already freed buffer. Free the buffer and
> report it as consumed instead.
>
> Seen on Mellanox ConnectX-6 DX MT2892 (FW 22.47.1026) with AF_XDP
> zero-copy on 7.3.0-rc6 when the user-space consumer could not keep up
> with the Rx ring. With this change no duplicate frames were seen with
> striding RQ on or off.
>
> Fixes: 269009893146 ("xsk: recycle buffer in case Rx queue was full")
> Signed-off-by: Marcin Knap <marcin.knap@vecima.com>
> ---
> Tested on mlx5 (ConnectX-6 DX) in zero-copy single-buffer mode.
> The i40e and ice changes and the multi-buffer path are build-tested
> only, as I don't have that hardware available.
> ---
> Changes in v2:
> - Also free the buffer on zero-copy redirect failure in gve DQO and
> octeontx2, which relied on the core freeing it (AI review).
> - Audited the remaining zero-copy drivers against Björn's table.
> ixgbe and igb no longer run XDP on a freed buffer after
> XDP_EXIT; making them drop and consume the descriptor (R2) is
> left for a follow-up unless you prefer it in this patch.
> - Rebased on current bpf.
> - Link to v1: https://patch.msgid.link/20261019-xsk-zc-rx-double-free-v1-1-2aa19f6628fb@vecima.com
>
> To: Joshua Washington <joshwash@google.com>
> To: Harshitha Ramamurthy <hramamurthy@google.com>
> To: Andrew Lunn <andrew+netdev@lunn.ch>
> To: "David S. Miller" <davem@davemloft.net>
> To: Eric Dumazet <edumazet@kernel.org>
> To: Jakub Kicinski <kuba@kernel.org>
> To: Paolo Abeni <pabeni@redhat.com>
> To: Tony Nguyen <anthony.l.nguyen@intel.com>
> To: Przemek Kitszel <przemyslaw.kitszel@intel.com>
> To: Sunil Goutham <sgoutham@marvell.com>
> To: Geetha sowjanya <gakula@marvell.com>
> To: Ratheesh Kannoth <rkannoth@marvell.com>
> To: Subbaraya Sundeep <sbhatta@marvell.com>
> To: Bharat Bhushan <bbhushan2@marvell.com>
> To: Magnus Karlsson <magnus.karlsson@intel.com>
> To: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
> To: Stanislav Fomichev <sdf@fomichev.me>
> To: Simon Horman <horms@kernel.org>
> To: Alexei Starovoitov <ast@kernel.org>
> To: Daniel Borkmann <daniel@iogearbox.net>
> To: Jesper Dangaard Brouer <hawk@kernel.org>
> To: John Fastabend <john.fastabend@gmail.com>
> Cc: netdev@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: intel-wired-lan@lists.osuosl.org
> Cc: bpf@vger.kernel.org
> ---
> drivers/net/ethernet/google/gve/gve_rx_dqo.c | 4 +++-
> drivers/net/ethernet/intel/i40e/i40e_xsk.c | 1 +
> drivers/net/ethernet/intel/ice/ice_xsk.c | 1 +
> drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c | 3 ++-
> net/xdp/xsk.c | 15 +++------------
> 5 files changed, 10 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/net/ethernet/google/gve/gve_rx_dqo.c b/drivers/net/ethernet/google/gve/gve_rx_dqo.c
> index 82ed5e48b00a..cc544420df11 100644
> --- a/drivers/net/ethernet/google/gve/gve_rx_dqo.c
> +++ b/drivers/net/ethernet/google/gve/gve_rx_dqo.c
> @@ -686,8 +686,10 @@ static void gve_xsk_done_dqo(struct gve_priv *priv, struct gve_rx_ring *rx,
> goto err;
> break;
> case XDP_REDIRECT:
> - if (unlikely(xdp_do_redirect(priv->dev, xdp, xprog)))
> + if (unlikely(xdp_do_redirect(priv->dev, xdp, xprog))) {
> + xsk_buff_free(xdp);
> goto err;
> + }
> break;
> }
>
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_xsk.c b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
> index 51a05ce4c7ce..a11ee1f3fa38 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_xsk.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_xsk.c
> @@ -360,6 +360,7 @@ static void i40e_handle_xdp_result_zc(struct i40e_ring *rx_ring,
> return;
>
> if (xdp_res == I40E_XDP_EXIT) {
> + xsk_buff_free(xdp_buff);
> *failure = true;
> return;
> }
> diff --git a/drivers/net/ethernet/intel/ice/ice_xsk.c b/drivers/net/ethernet/intel/ice/ice_xsk.c
> index 0643017541c3..7c1dd4c87a71 100644
> --- a/drivers/net/ethernet/intel/ice/ice_xsk.c
> +++ b/drivers/net/ethernet/intel/ice/ice_xsk.c
> @@ -636,6 +636,7 @@ int ice_clean_rx_irq_zc(struct ice_rx_ring *rx_ring,
> if (likely(xdp_res & (ICE_XDP_TX | ICE_XDP_REDIR))) {
> xdp_xmit |= xdp_res;
> } else if (xdp_res == ICE_XDP_EXIT) {
> + xsk_buff_free(first);
This seems to be enough to avoid double-free on non-need_wakeup case when
core was releasing the buffer.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
One nit is AF_XDP patches are routed via net/net-next since some time, but
I don't know if you have to resend or not.
> failure = true;
> first = NULL;
> break;
> diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c
> index 90af9b9044aa..6d10c132f61c 100644
> --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c
> +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c
> @@ -1555,7 +1555,8 @@ static bool otx2_xdp_rcv_pkt_handler(struct otx2_nic *pfvf,
> *need_xdp_flush = true;
> return true;
> }
> - return false;
> + xsk_buff_free(xsk_buff);
> + return true;
> }
>
> err = xdp_do_redirect(pfvf->netdev, &xdp, prog);
> diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
> index 781ba46eb152..89bac2feeff2 100644
> --- a/net/xdp/xsk.c
> +++ b/net/xdp/xsk.c
> @@ -224,21 +224,15 @@ static int xsk_rcv_zc(struct xdp_sock *xs, struct xdp_buff *xdp, u32 len)
> struct list_head *xskb_list;
> u32 contd = 0;
> u32 num_desc;
> - int err;
>
> - if (likely(!frags)) {
> - err = __xsk_rcv_zc(xs, xskb, len, contd);
> - if (err)
> - goto err;
> - return 0;
> - }
> + if (likely(!frags))
> + return __xsk_rcv_zc(xs, xskb, len, contd);
>
> contd = XDP_PKT_CONTD;
> num_desc = xdp_get_shared_info_from_buff(xdp)->nr_frags + 1;
> if (xskq_prod_nb_free(xs->rx, num_desc) < num_desc) {
> xs->rx_queue_full++;
> - err = -ENOBUFS;
> - goto err;
> + return -ENOBUFS;
> }
>
> __xsk_rcv_zc_safe(xs, xskb, len, contd);
> @@ -252,9 +246,6 @@ static int xsk_rcv_zc(struct xdp_sock *xs, struct xdp_buff *xdp, u32 len)
> }
>
> return 0;
> -err:
> - xsk_buff_free(xdp);
> - return err;
> }
>
> static void *xsk_copy_xdp_start(struct xdp_buff *from)
>
> ---
> base-commit: fb7bd3a2aad70a76232a7168a505386d0a1396af
> change-id: 20261019-xsk-zc-rx-double-free-1a3b059cd41f
>
> Best regards,
> --
> Marcin Knap <marcin.knap@vecima.com>
>
>
next prev parent reply other threads:[~2026-10-30 12:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-30 8:14 Marcin Knap via B4 Relay
2026-10-30 8:47 ` bot+bpf-ci
2026-10-30 12:55 ` Maciej Fijalkowski [this message]
2026-10-30 13:37 ` Björn Töpel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=auST0y4PEYkdewpa@boxer \
--to=maciej.fijalkowski@intel.com \
--cc=andrew+netdev@lunn.ch \
--cc=anthony.l.nguyen@intel.com \
--cc=ast@kernel.org \
--cc=bbhushan2@marvell.com \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=gakula@marvell.com \
--cc=hawk@kernel.org \
--cc=horms@kernel.org \
--cc=hramamurthy@google.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=john.fastabend@gmail.com \
--cc=joshwash@google.com \
--cc=jtollet@cisco.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=magnus.karlsson@intel.com \
--cc=marcin.knap@vecima.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=przemyslaw.kitszel@intel.com \
--cc=rkannoth@marvell.com \
--cc=sbhatta@marvell.com \
--cc=sdf@fomichev.me \
--cc=sgoutham@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®