On Nov 03, Maxime Chevallier wrote:
> The Multi-MSI interrupt handler doesn't clear the DMA error interrupts,
> and this leads to interrupt storms when one of these interrupts starts
> firing :
> 
>  - The RBU (rx buff unav) which triggers under high traffic load
> 
>    This triggers easily with iperf3 and small udp packets, and shows
>    when running the netpoll kselftest
> 
>  - The RPS (rx process stop) which triggers when we stop the DMA RX.
> 
>    This one shows when restarting the RX logic without doing a down/up
>    cycle, like when attaching an XDP program. The XSK kselftests
>    triggers it.
> 
> Let's make sure we clear these interrupts for multi-MSI cases, and call
> stmmac_global_err() upon tx_hard_error to avoid possible races with
> other interrupts/napi.
> 
> For that introduce an "ERR" DMA dir, as we don't want to touch the
> RI/TI bits when handling these interrupts.
> 
> Both of the above storms have been found on dwmac-motorcomm (YT6801),
> and are triggered by the xdp.py, xsk_reconfig.py, xdp_features.py,
> ring_reconfig.py and netpoll_basic kernel selftests.
> 
> This seems to only affect dwmac4, there's no multi-msi mode on
> dwmac1000, and on dwxgmac these interrupts are masked as of today.
> 
> Fixes: 6ccf12ae111e ("net: stmmac: use interrupt mode INTM=1 for multi-MSI")
> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> ---
> V2:
>  - Dropped reviews/tested tags as the implementation has substantially
>    changed, sorry :(
>  - Discarded the helper, call directly stmmac_dma_interrupt_status on
>    all chans and use stmmac_global_err() for TX hard errors, following
>    sashiko's review.
> 
>  drivers/net/ethernet/stmicro/stmmac/common.h  |  1 +
>  .../net/ethernet/stmicro/stmmac/dwmac4_dma.h  |  5 +++++
>  .../net/ethernet/stmicro/stmmac/dwmac4_lib.c  |  2 ++
>  .../net/ethernet/stmicro/stmmac/stmmac_main.c | 19 +++++++++++++++++++
>  4 files changed, 27 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
> index c74bc7c9750e..a972bee66504 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/common.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/common.h
> @@ -382,6 +382,7 @@ enum dma_irq_dir {
>  	DMA_DIR_RX = 0x1,
>  	DMA_DIR_TX = 0x2,
>  	DMA_DIR_RXTX = 0x3,
> +	DMA_DIR_ERR = 0x4,
>  };
>  
>  enum request_irq_err {
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
> index 43b036d4e95b..a7caac3c98e6 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
> @@ -173,6 +173,11 @@ static inline u32 dma_chanx_base_addr(const struct dwmac4_addrs *addrs,
>  					 DMA_CHAN_STATUS_TI | \
>  					 DMA_CHAN_STATUS_MSK_COMMON)
>  
> +#define DMA_CHAN_STATUS_MSK_ERR		(DMA_CHAN_STATUS_AIS | \
> +					 DMA_CHAN_STATUS_FBE | \
> +					 DMA_CHAN_STATUS_RPS | \
> +					 DMA_CHAN_STATUS_RBU)
> +
>  int dwmac4_dma_reset(void __iomem *ioaddr);
>  void dwmac4_enable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr,
>  			   u32 chan, bool rx, bool tx);
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
> index a0249715fafa..02aa1a3dd1e2 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
> @@ -150,6 +150,8 @@ int dwmac4_dma_interrupt(struct stmmac_priv *priv, void __iomem *ioaddr,
>  		intr_status &= DMA_CHAN_STATUS_MSK_RX;
>  	else if (dir == DMA_DIR_TX)
>  		intr_status &= DMA_CHAN_STATUS_MSK_TX;
> +	else if (dir == DMA_DIR_ERR)
> +		intr_status &= DMA_CHAN_STATUS_MSK_ERR;
>  
>  	/* ABNORMAL interrupts */
>  	if (unlikely(intr_status & DMA_CHAN_STATUS_AIS)) {
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 7ffed295eb14..6360605ef5ea 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -3145,6 +3145,22 @@ static int stmmac_napi_check(struct stmmac_priv *priv, u32 chan, u32 dir)
>  	return status;
>  }
>  
> +static void stmmac_dma_err_interrupt(struct stmmac_priv *priv)
> +{
> +	u8 channels_to_check = max(priv->plat->rx_queues_to_use,
> +				   priv->plat->tx_queues_to_use);
> +	int status;
> +	u8 chan;
> +
> +	for (chan = 0; chan < channels_to_check; chan++) {
> +		status = stmmac_dma_interrupt_status(priv, priv->ioaddr,
> +						     &priv->xstats, chan,
> +						     DMA_DIR_ERR);
> +		if (unlikely(status & tx_hard_error))
> +			stmmac_global_err(priv);
> +	}
> +}
> +
>  /**
>   * stmmac_dma_interrupt - DMA ISR
>   * @priv: driver private structure
> @@ -6494,6 +6510,9 @@ static irqreturn_t stmmac_mac_interrupt(int irq, void *dev_id)
>  	/* To handle Common interrupts */
>  	stmmac_common_interrupt(priv);
>  
> +	if (priv->plat->core_type == DWMAC_CORE_GMAC4)
> +		stmmac_dma_err_interrupt(priv);
> +
>  	return IRQ_HANDLED;
>  }

Reviewed-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>

>  
> -- 
> 2.56.0
>