From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
To: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-stm32@st-md-mailman.stormreply.com"
<linux-stm32@st-md-mailman.stormreply.com>,
"stable@vger.kernel.org" <stable@vger.kernel.org>
Subject: Re: [PATCH v2 2/2] usb: dwc2: wa for isoc packet tx fifo flush at periodic frame boundary
Date: Thu, 5 Nov 2026 01:27:33 +0000 [thread overview]
Message-ID: <auvbRQQXJsnbhvQw@vbox> (raw)
In-Reply-To: <20261104-dwc2-fifo-fixes-v2-v2-2-2bb13820f662@foss.st.com>
On Wed, Nov 04, 2026, Fabrice Gasnier wrote:
> If an isochronous packet is still being transmitted, when the end of
> periodic frame interval elapses, using dma desc on dwc2 controller,
> the device wrongly flushes the pending packets from the tx fifo.
> This can lead to a huge packet is sent on the bus, leading to the host
> finally reset the bus, and re-enumerate it.
>
> Workaround it by tuning the periodic frame interval limit from 80% to 95%,
> on the affected cores (2.70a to 4.00a). It makes the issue very unlikely
> to occur.
>
> Fixes: 540ccba08599 ("usb: dwc2: gadget: Start and complete DDMA isoc transfers")
> Cc: stable@vger.kernel.org
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> ---
> Changes in v2:
> - Thinh review comments:
> - Fix a typo 'flushes'
> - Use DCFG_PERFRINT() macro
> - Add DWC2_HS_IOT_REV_1_00a and DWC2_FS_IOT_REV_1_00a core revisions.
> - Add a Fixes tag, and Cc stable
> ---
> drivers/usb/dwc2/core.h | 1 +
> drivers/usb/dwc2/gadget.c | 15 +++++++++++++++
> 2 files changed, 16 insertions(+)
>
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> index 015a5fb7842d..54c040da0cae 100644
> --- a/drivers/usb/dwc2/core.h
> +++ b/drivers/usb/dwc2/core.h
> @@ -1108,6 +1108,7 @@ struct dwc2_hsotg {
>
> /* DWC OTG HW Release versions */
> #define DWC2_CORE_REV_4_30a 0x4f54430a
> +#define DWC2_CORE_REV_2_70a 0x4f54270a
> #define DWC2_CORE_REV_2_71a 0x4f54271a
> #define DWC2_CORE_REV_2_72a 0x4f54272a
> #define DWC2_CORE_REV_2_80a 0x4f54280a
> diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
> index bdabf3c39da1..b84cb6b2cefa 100644
> --- a/drivers/usb/dwc2/gadget.c
> +++ b/drivers/usb/dwc2/gadget.c
> @@ -3511,6 +3511,21 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
> if (hsotg->params.ipg_isoc_en)
> dcfg |= DCFG_IPG_ISOC_SUPPORDED;
>
> + /*
> + * WA for Device Flushes Ongoing ISOC IN Packet at End-of-Periodic-Frame Boundary.
> + * Once passed the end of periodic frame, and the controller is transmitting an
> + * ISOC IN packet, the device flushes the transmit FIFO. Tune periodic frame
> + * interval to 95% instead of 80% to avoid it.
> + */
> + if (using_desc_dma(hsotg) &&
> + ((hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_70a &&
> + hsotg->hw_params.snpsid <= DWC2_CORE_REV_4_00a) ||
> + hsotg->hw_params.snpsid == DWC2_FS_IOT_REV_1_00a ||
> + hsotg->hw_params.snpsid == DWC2_HS_IOT_REV_1_00a)) {
> + dcfg &= ~DCFG_PERFRINT_MASK;
> + dcfg |= DCFG_PERFRINT(DCFG_PERFRINT_LIMIT);
> + }
> +
> dwc2_writel(hsotg, dcfg, DCFG);
>
> dwc2_hsotg_init_fifo(hsotg);
>
> --
> 2.43.0
>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Thanks,
Thinh
prev parent reply other threads:[~2026-11-05 1:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-04 13:20 [PATCH v2 0/2] usb: dwc2: fix fifo reinit and workaround for isoc tx packet Fabrice Gasnier
2026-11-04 13:20 ` [PATCH v2 1/2] usb: dwc2: fix fifo reinit in dwc2_hsotg_core_init_disconnected Fabrice Gasnier
2026-11-04 13:20 ` [PATCH v2 2/2] usb: dwc2: wa for isoc packet tx fifo flush at periodic frame boundary Fabrice Gasnier
2026-11-05 1:27 ` Thinh Nguyen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=auvbRQQXJsnbhvQw@vbox \
--to=thinh.nguyen@synopsys.com \
--cc=fabrice.gasnier@foss.st.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux-usb@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®