Re: [PATCH] dmaengine: axi-dmac: fix incorrect segment size calculation

[Frank Li <Frank.li@oss.nxp.com>]

On Thu, Nov 05, 2026 at 04:15:47PM +0300, Sergey Matsievskiy wrote:
> [You don't often get email from matsievskiysv@gmail.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> When chan->max_length has a value of 0xffffffff (which is a possible IP
> configuration), DIV_ROUND_UP returns 0, resulting in incorrect number of
> segments calculation. Fix this by using DIV_ROUND_UP_ULL division
> function.
>
> Signed-off-by: Sergey Matsievskiy <matsievskiysv@gmail.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  drivers/dma/dma-axi-dmac.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/dma/dma-axi-dmac.c b/drivers/dma/dma-axi-dmac.c
> index 02acde918117..0a308630e542 100644
> --- a/drivers/dma/dma-axi-dmac.c
> +++ b/drivers/dma/dma-axi-dmac.c
> @@ -707,7 +707,7 @@ static struct axi_dmac_sg *axi_dmac_fill_linear_sg(struct axi_dmac_chan *chan,
>         unsigned int len;
>
>         /* Split into multiple equally sized segments if necessary */
> -       num_segments = DIV_ROUND_UP(period_len, chan->max_length);
> +       num_segments = DIV_ROUND_UP_ULL(period_len, chan->max_length);
>         segment_size = DIV_ROUND_UP(period_len, num_segments);
>         /* Take care of alignment */
>         segment_size = ((segment_size - 1) | chan->length_align_mask) + 1;
> @@ -753,7 +753,7 @@ axi_dmac_prep_peripheral_dma_vec(struct dma_chan *c, const struct dma_vec *vecs,
>                 return NULL;
>
>         for (i = 0; i < nb; i++)
> -               num_sgs += DIV_ROUND_UP(vecs[i].len, chan->max_length);
> +               num_sgs += DIV_ROUND_UP_ULL(vecs[i].len, chan->max_length);
>
>         desc = axi_dmac_alloc_desc(chan, num_sgs);
>         if (!desc)
> @@ -840,7 +840,7 @@ static struct dma_async_tx_descriptor *axi_dmac_prep_dma_cyclic(
>                 return NULL;
>
>         num_periods = buf_len / period_len;
> -       num_segments = DIV_ROUND_UP(period_len, chan->max_length);
> +       num_segments = DIV_ROUND_UP_ULL(period_len, chan->max_length);
>         num_sgs = num_periods * num_segments;
>
>         desc = axi_dmac_alloc_desc(chan, num_sgs);
> --
> 2.47.3
>