mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@oss.nxp.com>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: Linus Walleij <linusw@kernel.org>,
	Bartosz Golaszewski <brgl@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Stefan Agner <stefan@agner.ch>,
	Dong Aisheng <aisheng.dong@nxp.com>, Jacky Bai <ping.bai@nxp.com>,
	Frank Li <Frank.Li@nxp.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Bartosz Golaszewski <brgl@bgdev.pl>,
	linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org, Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH v3 03/11] gpio: vf610: use devm_clk_get_optional_enabled() for clock handling
Date: Thu, 5 Nov 2026 11:25:10 -0600	[thread overview]
Message-ID: <auy79qnZiyKxLvy8@SMW015318> (raw)
In-Reply-To: <20261105-gpio-vf610-fixes-v3-3-504e19de5ad5@nxp.com>

On Thu, Nov 05, 2026 at 11:53:01AM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Replace the manual clock acquisition, enable and cleanup sequences with
> devm_clk_get_optional_enabled() for both the port and gpio clocks. The
> helper treats a missing clock as NULL and automatically disables and
> unprepares the clocks on driver unbind, so the vf610_gpio_disable_clk()
> helper is no longer needed.
>
> Unlike the previous code, propagate all errors from the helper,
> including clk_prepare_enable() failures. The old code only tolerated
> lookup errors and failed probe when enabling the clock failed; continuing
> with a disabled clock could fault when accessing the PORT/GPIO registers.
> The optional helper already covers the "clock not described" case, so
> there is no need to silently ignore other errors.
>
> The clock pointers are only needed during probe now that devm manages
> their lifetime, so drop them from struct vf610_gpio_port and use a local
> variable instead.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  drivers/gpio/gpio-vf610.c | 46 +++++++++-------------------------------------
>  1 file changed, 9 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
> index c1c562071c0d..9ebb4469fd15 100644
> --- a/drivers/gpio/gpio-vf610.c
> +++ b/drivers/gpio/gpio-vf610.c
> @@ -34,8 +34,6 @@ struct vf610_gpio_port {
>  	void __iomem *gpio_base;
>  	const struct fsl_gpio_soc_data *sdata;
>  	u8 irqc[VF610_GPIO_PER_PORT];
> -	struct clk *clk_port;
> -	struct clk *clk_gpio;
>  	int irq;
>  };
>
> @@ -206,11 +204,6 @@ static const struct irq_chip vf610_irqchip = {
>  	GPIOCHIP_IRQ_RESOURCE_HELPERS,
>  };
>
> -static void vf610_gpio_disable_clk(void *data)
> -{
> -	clk_disable_unprepare(data);
> -}
> -
>  static int vf610_gpio_probe(struct platform_device *pdev)
>  {
>  	struct gpio_generic_chip_config config;
> @@ -218,6 +211,7 @@ static int vf610_gpio_probe(struct platform_device *pdev)
>  	struct vf610_gpio_port *port;
>  	struct gpio_chip *gc;
>  	struct gpio_irq_chip *girq;
> +	struct clk *clk;
>  	unsigned long flags;
>  	int i;
>  	int ret;
> @@ -261,37 +255,15 @@ static int vf610_gpio_probe(struct platform_device *pdev)
>  	if (port->irq < 0)
>  		return port->irq;
>
> -	port->clk_port = devm_clk_get(dev, "port");
> -	ret = PTR_ERR_OR_ZERO(port->clk_port);
> -	if (!ret) {
> -		ret = clk_prepare_enable(port->clk_port);
> -		if (ret)
> -			return ret;
> -		ret = devm_add_action_or_reset(dev, vf610_gpio_disable_clk,
> -					       port->clk_port);
> -		if (ret)
> -			return ret;
> -	} else if (ret == -EPROBE_DEFER) {
> -		/*
> -		 * Percolate deferrals, for anything else,
> -		 * just live without the clocking.
> -		 */
> -		return ret;
> -	}
> +	clk = devm_clk_get_optional_enabled(dev, "port");
> +	if (IS_ERR(clk))
> +		return dev_err_probe(dev, PTR_ERR(clk),
> +				     "failed to get/enable port clock\n");
>
> -	port->clk_gpio = devm_clk_get(dev, "gpio");
> -	ret = PTR_ERR_OR_ZERO(port->clk_gpio);
> -	if (!ret) {
> -		ret = clk_prepare_enable(port->clk_gpio);
> -		if (ret)
> -			return ret;
> -		ret = devm_add_action_or_reset(dev, vf610_gpio_disable_clk,
> -					       port->clk_gpio);
> -		if (ret)
> -			return ret;
> -	} else if (ret == -EPROBE_DEFER) {
> -		return ret;
> -	}
> +	clk = devm_clk_get_optional_enabled(dev, "gpio");
> +	if (IS_ERR(clk))
> +		return dev_err_probe(dev, PTR_ERR(clk),
> +				     "failed to get/enable gpio clock\n");
>
>  	gc = &port->chip.gc;
>  	flags = GPIO_GENERIC_PINCTRL_BACKEND;
>
> --
> 2.51.0
>
>

  reply	other threads:[~2026-11-05 17:25 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-05  3:52 [PATCH v3 00/11] gpio: vf610: fix clocks and misc cleanup Peng Fan (OSS)
2026-11-05  3:52 ` [PATCH v3 01/11] dt-bindings: gpio: vf610: fix clock requirements per SoC Peng Fan (OSS)
2026-11-05 12:30   ` Peng Fan
2026-11-05 17:22   ` Frank Li
2026-11-05  3:53 ` [PATCH v3 02/11] gpio: vf610: simplify with irq_set_irq_wake() Peng Fan (OSS)
2026-11-05 17:23   ` Frank Li
2026-11-05  3:53 ` [PATCH v3 03/11] gpio: vf610: use devm_clk_get_optional_enabled() for clock handling Peng Fan (OSS)
2026-11-05 17:25   ` Frank Li [this message]
2026-11-05  3:53 ` [PATCH v3 04/11] gpio: vf610: drop unneeded header Peng Fan (OSS)
2026-11-05  3:53 ` [PATCH v3 05/11] gpio: vf610: drop unnecessary wrappers Peng Fan (OSS)
2026-11-05  3:53 ` [PATCH v3 06/11] MAINTAINERS: Add VF610 GPIO driver support Peng Fan (OSS)
2026-11-05  3:53 ` [PATCH v3 07/11] arm64: dts: imx8ulp: fix gpio clocks Peng Fan (OSS)
2026-11-05  3:53 ` [PATCH v3 08/11] arm64: dts: imx93: " Peng Fan (OSS)
2026-11-05  3:53 ` [PATCH v3 09/11] arm64: dts: imx95: " Peng Fan (OSS)
2026-11-05  3:53 ` [PATCH v3 10/11] arm64: dts: imx952: " Peng Fan (OSS)
2026-11-05  3:53 ` [PATCH v3 11/11] arm64: dts: imx94: add clocks for gpio controller Peng Fan (OSS)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=auy79qnZiyKxLvy8@SMW015318 \
    --to=frank.li@oss.nxp.com \
    --cc=Frank.Li@nxp.com \
    --cc=aisheng.dong@nxp.com \
    --cc=brgl@bgdev.pl \
    --cc=brgl@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peng.fan@nxp.com \
    --cc=peng.fan@oss.nxp.com \
    --cc=ping.bai@nxp.com \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=stefan@agner.ch \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®