From: Shawn Guo <shengchao.guo@oss.qualcomm.com>
To: Nabige Aala <nabige.aala@oss.qualcomm.com>
Cc: Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Manivannan Sadhasivam <mani@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Rob Clark <robin.clark@oss.qualcomm.com>,
Dmitry Baryshkov <lumag@kernel.org>,
Abhinav Kumar <abhinav.kumar@linux.dev>,
Jessica Zhang <jesszhan0024@gmail.com>,
Sean Paul <sean@poorly.run>,
Marijn Suijten <marijn.suijten@somainline.org>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Kuogee Hsieh <quic_khsieh@quicinc.com>,
Ritesh Kumar <ritesh.kumar@oss.qualcomm.com>,
Mahadevan P <mahadevan.p@oss.qualcomm.com>,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org
Subject: Re: [PATCH v3 03/11] dt-bindings: display/msm: Document Nord MDSS
Date: Wed, 18 Nov 2026 05:51:23 +0100 [thread overview]
Message-ID: <av0uy_Cq9iaTZn4c@QCOM-aGQu4IUr3Y.na.qualcomm.com> (raw)
In-Reply-To: <20261116-nord-drv-dt-v3-3-e3d3bf0e2c49@oss.qualcomm.com>
On Mon, Nov 16, 2026 at 06:46:42PM +0530, Nabige Aala wrote:
> From: Mahadevan P <mahadevan.p@oss.qualcomm.com>
>
> Nord has a new MDSS 12.1 revision with DPU 1499A and two independent,
> DP-only display interface controllers (no DSI), which no existing
> schema describes. Add a dedicated qcom,nord-mdss binding to document.
>
> Assisted-by: LLM
> Signed-off-by: Mahadevan P <mahadevan.p@oss.qualcomm.com>
> Signed-off-by: Nabige Aala <nabige.aala@oss.qualcomm.com>
> ---
> .../bindings/display/msm/qcom,nord-mdss.yaml | 396 +++++++++++++++++++++
> 1 file changed, 396 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,nord-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,nord-mdss.yaml
> new file mode 100644
> index 000000000000..abd80dae4e7f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/qcom,nord-mdss.yaml
> @@ -0,0 +1,396 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/qcom,nord-mdss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Nord display subsystem (MDSS)
> +
> +maintainers:
> + - Mahadevan P <mahadevan.p@oss.qualcomm.com>
> +
> +description:
> + Nord display subsystem consists of MDSS (display controller), DPU 1499A
> + (display processing unit), and display interface controllers (DP only, no DSI).
> + This is MDSS 12.1, DP-only, with 2 independent DP controllers.
> +
> +$ref: /schemas/display/msm/mdss-common.yaml#
> +
> +properties:
> + compatible:
> + const: qcom,nord-mdss
> +
> + clocks:
> + items:
> + - description: Display AHB
> + - description: Display hf AXI
> + - description: Display core
> +
> + clock-names:
> + items:
> + - const: iface
> + - const: bus
> + - const: core
> +
> + iommus:
> + maxItems: 1
> +
> + interconnects:
> + items:
> + - description: Interconnect path from mdp0 port to the data bus
> + - description: Interconnect path from CPU to the reg bus
> +
> + interconnect-names:
> + items:
> + - const: mdp0-mem
> + - const: cpu-cfg
> +
> +patternProperties:
> + "^display-controller@[0-9a-f]+$":
> + type: object
> + additionalProperties: true
> + properties:
> + compatible:
> + const: qcom,nord-dpu
> +
> + "^displayport-controller@[0-9a-f]+$":
> + type: object
> + additionalProperties: true
> + properties:
> + compatible:
> + const: qcom,nord-dp
This is now contradicting with the dp-controller bindings which documents
"qcom,nord-dp" with a fallback on "qcom,sa8775p-dp".
> +
> + "^phy@[0-9a-f]+$":
> + type: object
> + additionalProperties: true
> + properties:
> + compatible:
> + const: qcom,nord-dp-phy
> +
> +required:
> + - compatible
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,nord-dispcc.h>
> + #include <dt-bindings/clock/qcom,nord-nwgcc.h>
> + #include <dt-bindings/clock/qcom,nord-tcsrcc.h>
> + #include <dt-bindings/interconnect/qcom,icc.h>
> + #include <dt-bindings/interconnect/qcom,nord-rpmh.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/power/qcom,rpmhpd.h>
> +
> + display-subsystem@ae00000 {
> + compatible = "qcom,nord-mdss";
> + reg = <0x0ae00000 0x1000>;
> + reg-names = "mdss";
> +
> + power-domains = <&dispcc0 MDSS_DISP_CC_MDSS_CORE_GDSC>;
> + clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
> + <&nwgcc NW_GCC_DISP_0_HF_AXI_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>;
> + clock-names = "iface", "bus", "core";
> + resets = <&dispcc0 MDSS_DISP_CC_MDSS_CORE_BCR>;
> +
> + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> + <&hscnoc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
> + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
> + interconnect-names = "mdp0-mem", "cpu-cfg";
> +
> + interrupts = <GIC_SPI 930 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + iommus = <&apps_smmu_1 0x3e0 0x2>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + display-controller@ae01000 {
> + compatible = "qcom,nord-dpu";
> + reg = <0x0ae01000 0x8f000>,
> + <0x0aeb0000 0x3000>;
> + reg-names = "mdp", "vbif";
> +
> + clocks = <&nwgcc NW_GCC_DISP_0_HF_AXI_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
> + clock-names = "nrt_bus", "iface", "lut", "core", "vsync";
> +
> + assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
> + assigned-clock-rates = <19200000>;
> +
> + operating-points-v2 = <&mdp_opp_table>;
> + power-domains = <&rpmhpd RPMHPD_MMCX>;
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + dpu_intf0_out: endpoint {
> + remote-endpoint = <&mdss_dp0_in>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + dpu_intf4_out: endpoint {
> + remote-endpoint = <&mdss_dp1_in>;
> + };
> + };
> + };
> +
> + mdp_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-300000000 {
> + opp-hz = /bits/ 64 <300000000>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-417000000 {
> + opp-hz = /bits/ 64 <417000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> +
> + opp-532000000 {
> + opp-hz = /bits/ 64 <532000000>;
> + required-opps = <&rpmhpd_opp_nom>;
> + };
> +
> + opp-650000000 {
> + opp-hz = /bits/ 64 <650000000>;
> + required-opps = <&rpmhpd_opp_turbo>;
> + };
> +
> + opp-710000000 {
> + opp-hz = /bits/ 64 <710000000>;
> + required-opps = <&rpmhpd_opp_turbo_l1>;
> + };
> + };
> + };
> +
> + displayport-controller@af54000 {
> + compatible = "qcom,nord-dp";
The example needs to be updated for the "qcom,sa8775p-dp" fallback
as well.
Shawn
> +
> + reg = <0xaf54000 0x200>,
> + <0xaf54200 0x200>,
> + <0xaf55000 0xc00>,
> + <0xaf56000 0x400>,
> + <0xaf57000 0x400>,
> + <0xaf58000 0x400>,
> + <0xaf59000 0x400>,
> + <0xaf5a000 0x600>,
> + <0xaf5b000 0x600>;
> +
> + clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK>;
> + clock-names = "core_iface", "core_aux",
> + "ctrl_link", "ctrl_link_iface",
> + "stream_pixel", "stream_1_pixel",
> + "stream_2_pixel", "stream_3_pixel";
> +
> + assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK_SRC>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK_SRC>;
> + assigned-clock-parents = <&dp0_phy 0>,
> + <&dp0_phy 1>,
> + <&dp0_phy 1>,
> + <&dp0_phy 1>,
> + <&dp0_phy 1>;
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <12>;
> +
> + phys = <&dp0_phy>;
> + phy-names = "dp";
> +
> + operating-points-v2 = <&dp_opp_table>;
> + power-domains = <&rpmhpd RPMHPD_MMCX>;
> +
> + #sound-dai-cells = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + mdss_dp0_in: endpoint {
> + remote-endpoint = <&dpu_intf0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + mdss_dp0_out: endpoint { };
> + };
> + };
> +
> + dp_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-162000000 {
> + opp-hz = /bits/ 64 <162000000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-270000000 {
> + opp-hz = /bits/ 64 <270000000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-540000000 {
> + opp-hz = /bits/ 64 <540000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> +
> + opp-810000000 {
> + opp-hz = /bits/ 64 <810000000>;
> + required-opps = <&rpmhpd_opp_nom>;
> + };
> + };
> + };
> +
> + displayport-controller@af5c000 {
> + compatible = "qcom,nord-dp";
> +
> + reg = <0xaf5c000 0x200>,
> + <0xaf5c200 0x200>,
> + <0xaf5d000 0xc00>,
> + <0xaf5e000 0x400>,
> + <0xaf5f000 0x400>,
> + <0xaf60000 0x400>,
> + <0xaf61000 0x400>,
> + <0xaf62000 0x600>,
> + <0xaf63000 0x600>;
> +
> + clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL2_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL3_CLK>;
> + clock-names = "core_iface", "core_aux",
> + "ctrl_link", "ctrl_link_iface",
> + "stream_pixel", "stream_1_pixel",
> + "stream_2_pixel", "stream_3_pixel";
> +
> + assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
> + assigned-clock-parents = <&dp1_phy 0>,
> + <&dp1_phy 1>,
> + <&dp1_phy 1>;
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <13>;
> +
> + phys = <&dp1_phy>;
> + phy-names = "dp";
> +
> + operating-points-v2 = <&dp1_opp_table>;
> + power-domains = <&rpmhpd RPMHPD_MMCX>;
> +
> + #sound-dai-cells = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + mdss_dp1_in: endpoint {
> + remote-endpoint = <&dpu_intf4_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + mdss_dp1_out: endpoint { };
> + };
> + };
> +
> + dp1_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-162000000 {
> + opp-hz = /bits/ 64 <162000000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-270000000 {
> + opp-hz = /bits/ 64 <270000000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-540000000 {
> + opp-hz = /bits/ 64 <540000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> +
> + opp-810000000 {
> + opp-hz = /bits/ 64 <810000000>;
> + required-opps = <&rpmhpd_opp_nom>;
> + };
> + };
> + };
> +
> + dp0_phy: phy@fc3a00 {
> + compatible = "qcom,nord-dp-phy";
> +
> + reg = <0xfc3a00 0x1d0>,
> + <0xfc3200 0x128>,
> + <0xfc3600 0x128>,
> + <0xfc3000 0x200>;
> +
> + clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
> + <&tcsrcc TCSR_DP_TX_0_CLKREF_EN>;
> + clock-names = "aux", "cfg_ahb", "ref";
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + power-domains = <&rpmhpd RPMHPD_MX>;
> + };
> +
> + dp1_phy: phy@fc6a00 {
> + compatible = "qcom,nord-dp-phy";
> +
> + reg = <0xfc6a00 0x200>,
> + <0xfc6200 0xd0>,
> + <0xfc6600 0xd0>,
> + <0xfc6000 0x1c8>;
> +
> + clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
> + <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
> + <&tcsrcc TCSR_DP_TX_1_CLKREF_EN>;
> + clock-names = "aux", "cfg_ahb", "ref";
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + power-domains = <&rpmhpd RPMHPD_MX>;
> + };
> + };
>
> --
> 2.34.1
>
next prev parent reply other threads:[~2026-11-18 4:51 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 13:16 [PATCH v3 00/11] Add Qualcomm Nord display and eDP PHY support Nabige Aala
2026-11-16 13:16 ` [PATCH v3 01/11] dt-bindings: phy: qcom,edp-phy: Add DP PHY compatible for Nord Nabige Aala
2026-11-16 13:16 ` [PATCH v3 02/11] dt-bindings: display: msm: dp-controller: Document Nord DisplayPort Controller Nabige Aala
2026-11-16 13:16 ` [PATCH v3 03/11] dt-bindings: display/msm: Document Nord MDSS Nabige Aala
2026-11-17 15:23 ` Rob Herring (Arm)
2026-11-18 4:51 ` Shawn Guo [this message]
2026-11-16 13:16 ` [PATCH v3 04/11] dt-bindings: display/msm: qcom,sm8650-dpu: Add Qualcomm Nord Soc Nabige Aala
2026-11-16 13:16 ` [PATCH v3 05/11] drm/msm/dpu: Add support for DPU 12.1 on Nord Nabige Aala
2026-11-16 13:16 ` [PATCH v3 06/11] drm/msm/dpu: Fix DSI tear interrupts broken by adding INTF_9 and INTF_10 Nabige Aala
2026-11-16 13:16 ` [PATCH v3 07/11] drm/msm: mdss: Add support for MDSS on Nord Nabige Aala
2026-11-16 13:16 ` [PATCH v3 08/11] drm/msm/dp: Add support for DP controllers " Nabige Aala
2026-11-16 13:16 ` [PATCH v3 09/11] phy: qcom: edp: Generalize power-on path for per-SoC overrides Nabige Aala
2026-11-16 13:16 ` [PATCH v3 10/11] phy: qcom: edp: Add Nord-specific QSERDES COM register header Nabige Aala
2026-11-16 13:16 ` [PATCH v3 11/11] phy: qcom: edp: Add Nord eDP/DP PHY support Nabige Aala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=av0uy_Cq9iaTZn4c@QCOM-aGQu4IUr3Y.na.qualcomm.com \
--to=shengchao.guo@oss.qualcomm.com \
--cc=abhinav.kumar@linux.dev \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jesszhan0024@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=lumag@kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mahadevan.p@oss.qualcomm.com \
--cc=mani@kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=mripard@kernel.org \
--cc=nabige.aala@oss.qualcomm.com \
--cc=neil.armstrong@linaro.org \
--cc=quic_khsieh@quicinc.com \
--cc=ritesh.kumar@oss.qualcomm.com \
--cc=robh@kernel.org \
--cc=robin.clark@oss.qualcomm.com \
--cc=sean@poorly.run \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®