From: Frank Li <Frank.li@oss.nxp.com>
To: James Hilliard <james.hilliard1@gmail.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>,
Vinod Koul <vkoul@kernel.org>, Frank Li <Frank.Li@kernel.org>,
Sergey Khimich <serghox@gmail.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Sia Jee Heng <jee.heng.sia@intel.com>,
Mitch Barnett <mitch@accuratesound.ca>,
dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: Re: [PATCH v7 3/8] dmaengine: dw-axi-dmac: retain descriptors when termination times out
Date: Wed, 18 Nov 2026 11:31:41 -0600 [thread overview]
Message-ID: <av3g_VJ4TtxQTOI2@SMW015318> (raw)
In-Reply-To: <20261117-submit-dw-axi-dma-stop-pause-v1-v7-3-d5f2309afd72@gmail.com>
On Tue, Nov 17, 2026 at 05:07:42PM -0700, James Hilliard wrote:
> dma_chan_terminate_all() warns when the channel enable bit does not clear,
> but then frees the descriptors and returns success. Its synchronize
> callback only drains virtual-channel callbacks, so terminate_sync() can
> also report success while hardware still accesses the transfer.
>
> Return the polling error before detaching descriptors or changing the
> peripheral routing. This keeps the transfer resources available while
> the channel remains enabled and lets the caller retry termination without
> treating the timeout as a successful stop.
>
> Hold the channel lock across disabling, polling and descriptor detachment
> so an interrupt handler cannot restart the channel between the stop check
> and cleanup.
>
> Fixes: 1deb96c0fa58 ("dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic()")
> Cc: stable@vger.kernel.org
> Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
> ---
> drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 9 ++++++---
> 1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
> index 405ab9a78955..040c12d07db2 100644
> --- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
> +++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
> @@ -1185,22 +1185,25 @@ static int dma_chan_terminate_all(struct dma_chan *dchan)
> int ret;
> LIST_HEAD(head);
>
> + spin_lock_irqsave(&chan->vc.lock, flags);
> +
> axi_chan_disable(chan);
>
> ret = readx_poll_timeout_atomic(axi_chan_is_hw_enable, chan,
> enabled, !enabled,
> 1 * USEC_PER_MSEC, 50 * USEC_PER_MSEC);
> - if (ret)
> + if (ret) {
> + spin_unlock_irqrestore(&chan->vc.lock, flags);
It is worth to change use guard cleanup.
Frank
> dev_warn(dmaengine_chan_dev(dchan),
> "%s failed to stop\n", axi_chan_name(chan));
> + return ret;
> + }
>
> if (chan->direction != DMA_MEM_TO_MEM)
> dw_axi_dma_set_hw_channel(chan, false);
> if (chan->direction == DMA_MEM_TO_DEV)
> dw_axi_dma_set_byte_halfword(chan, false);
>
> - spin_lock_irqsave(&chan->vc.lock, flags);
> -
> vchan_get_all_descriptors(&chan->vc, &head);
>
> spin_unlock_irqrestore(&chan->vc.lock, flags);
>
> --
> 2.53.0
>
next prev parent reply other threads:[~2026-11-18 17:31 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 0:07 [PATCH v7 0/8] dmaengine: dw-axi-dmac: fix termination and pause acknowledgment James Hilliard
2026-11-18 0:07 ` [PATCH v7 1/8] dmaengine: dw-axi-dmac: keep cyclic mode in the descriptor James Hilliard
2026-11-18 17:20 ` Frank Li
2026-11-18 0:07 ` [PATCH v7 2/8] dmaengine: dw-axi-dmac: poll the correct enable bit during termination James Hilliard
2026-11-18 17:27 ` Frank Li
2026-11-18 0:07 ` [PATCH v7 3/8] dmaengine: dw-axi-dmac: retain descriptors when termination times out James Hilliard
2026-11-18 17:31 ` Frank Li [this message]
2026-11-18 0:07 ` [PATCH v7 4/8] dmaengine: dw-axi-dmac: use atomic polling for suspend acknowledgment James Hilliard
2026-11-18 17:32 ` Frank Li
2026-11-18 0:07 ` [PATCH v7 5/8] dmaengine: dw-axi-dmac: preserve pending pause requests James Hilliard
2026-11-18 0:07 ` [PATCH v7 6/8] dmaengine: dw-axi-dmac: retain descriptors until callbacks drain James Hilliard
2026-11-18 0:07 ` [PATCH v7 7/8] dmaengine: dw-axi-dmac: serialize interrupt status with channel reuse James Hilliard
2026-11-18 0:07 ` [PATCH v7 8/8] dmaengine: dw-axi-dmac: guard shared IRQs across the controller lifetime James Hilliard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=av3g_VJ4TtxQTOI2@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Eugeniy.Paltsev@synopsys.com \
--cc=Frank.Li@kernel.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=james.hilliard1@gmail.com \
--cc=jee.heng.sia@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mitch@accuratesound.ca \
--cc=serghox@gmail.com \
--cc=stable@vger.kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®