From: Vladimir Oltean <vladimir.oltean@nxp.com>
To: Aristo Chen <aristo.chen@canonical.com>
Cc: UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net] net: dsa: felix: fix NULL pointer dereference in felix_port_enable()
Date: Thu, 19 Nov 2026 13:59:50 +0200 [thread overview]
Message-ID: <av7fR4V6ZRUeVECC@lxl00025.wbi.nxp.com> (raw)
In-Reply-To: <20261119100710.129379-1-aristo.chen@canonical.com>
Hi Aristo,
On Thu, Nov 19, 2026 at 10:07:10AM +0000, Aristo Chen wrote:
> DSA registers the user ports in dsa_tree_setup_ports() before it sets
> conduit->dsa_ptr in dsa_tree_setup_conduit().
I wish I had seen this when writing commit 11fd667dac31 ("net: dsa:
setup master before ports"), because I later had to revert it in commit
762c2998c9625f642f0d23da7d3f7e4f90665fdf due to some unforeseen MTU
handling complications. Had I realized the conduit->dsa_ptr
implications, I would have tried harder to solve the MTU stuff.
> On teardown, it clears
> conduit->dsa_ptr in dsa_tree_teardown_conduit() before
> dsa_tree_teardown_ports() removes the user ports. RTNL is not held
> across either pair of steps, so user space can open a user port while
> conduit->dsa_ptr is NULL.
Correct, even though conduit->dsa_ptr itself *is* assigned under
rtnl_lock() since commit c146f9bc195a ("net: dsa: hold rtnl_mutex when
calling dsa_master_{setup,teardown}").
>
> In NPI mode, felix_port_enable() calls felix_cpu_port_for_conduit().
> For a physical conduit, that function reads the CPU port index through
> conduit->dsa_ptr without checking for NULL. This caused an oops on an
> LS1028A RDB when systemd-networkd tried to open a user port while the
> switch was being probed again at runtime:
Yeah, I think this isn't the only problem. conduit->dsa_ptr is accessed
from the data path as well, so IMO patching place after place is just
playing the whack-a-mole game.
I realize reapplying commit 11fd667dac31 ("net: dsa: setup master before
ports") for stable kernels introduces a high regression risk, but what
about this change instead (not even compile-tested)?
diff --git a/net/dsa/user.c b/net/dsa/user.c
index 041f9060c8ef..c68ed0389404 100644
--- a/net/dsa/user.c
+++ b/net/dsa/user.c
@@ -403,6 +403,9 @@ static int dsa_user_open(struct net_device *dev)
struct dsa_port *dp = dsa_user_to_port(dev);
int err;
+ if (!conduit->dsa_ptr)
+ return -ENETDOWN;
+
err = dev_open(conduit, NULL);
if (err < 0) {
netdev_err(dev, "failed to open conduit %s\n", conduit->name);
I know what you're thinking - if we refuse bringing the interface up
altogether, won't that regress user space and be even worse than risking
race conditions with dsa_conduit_setup() assigning dev->dsa_ptr fast enough?
And the reason why I think this alternative change has a chance is
because of DSA history, where bringing a user port up had as prerequisite
to bring the conduit up first. I removed that dependency in commit
9d5ef190e561 ("net: dsa: automatically bring up DSA master when opening
user port"), but user space still has code to deal with this for older
kernels. See:
https://github.com/systemd/systemd/blob/v262.2/src/network/networkd-setlink.c#L1081-L1082
and I'm hoping other network managers than systemd-networkd have similar
code as well.
So I'm just proposing to play dumb for a while in stable kernels, return
the -ENETDOWN that used to be established practice, and buy some time to
do a more proper reordering of the setup/teardown in net-next, which
gives us the guarantee that we need that conduit->dsa_ptr is a valid
pointer for the entire registered lifetime of the user ports.
prev parent reply other threads:[~2026-11-19 11:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 10:07 Aristo Chen
2026-11-19 11:59 ` Vladimir Oltean [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=av7fR4V6ZRUeVECC@lxl00025.wbi.nxp.com \
--to=vladimir.oltean@nxp.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=aristo.chen@canonical.com \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®