From: "Lorenzo Stoakes (ARM)" <ljs@kernel.org>
To: Fuad Tabba <fuad.tabba@linux.dev>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Sean Christopherson <seanjc@google.com>,
kvm@vger.kernel.org, linux-kselftest@vger.kernel.org,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
Isaku Yamahata <isaku.yamahata@intel.com>,
Rick Edgecombe <rick.p.edgecombe@intel.com>,
Marc Zyngier <maz@kernel.org>,
Oliver Upton <oliver.upton@linux.dev>,
kvmarm@lists.linux.dev, Wei-Lin Chang <weilin.chang@arm.com>,
Will Deacon <will@kernel.org>, Fuad Tabba <tabba@google.com>,
stable@vger.kernel.org
Subject: Re: [PATCH 1/2] KVM: Stop KVM_PRE_FAULT_MEMORY when the vCPU's dirty ring is full
Date: Tue, 10 Nov 2026 14:22:26 +0000 [thread overview]
Message-ID: <avMiLt3ZXjYesS3X@gremlin> (raw)
In-Reply-To: <20261110110724.3614412-2-fuad.tabba@linux.dev>
On Tue, Nov 10, 2026 at 11:07:23AM +0000, Fuad Tabba wrote:
> Pre-faulting can map a dirty-logged page writable, which pushes it to
> the vCPU's dirty ring. KVM_RUN exits with KVM_EXIT_DIRTY_RING_FULL
> before the ring overflows, but the pre-fault loop never checks it, so
> one call over more such pages than the ring has free trips the WARN in
> kvm_dirty_ring_push() and overwrites entries userspace hasn't
> harvested. On x86:
>
> WARNING: arch/x86/kvm/../../../virt/kvm/dirty_ring.c:225 at kvm_dirty_ring_push+0x7a/0xd0
> Call Trace:
> make_spte+0x2cc/0x450
> kvm_tdp_mmu_map+0x5e1/0x7f0
> kvm_tdp_page_fault+0x12c/0x1b0
> kvm_mmu_do_page_fault+0x181/0x250
> kvm_arch_vcpu_pre_fault_memory+0x136/0x1d0
> kvm_vcpu_pre_fault_memory+0xcf/0x180
> kvm_vcpu_ioctl+0x455/0x770
If you have a local repro maybe worth sending a regression test for this?... and
I type that, then check the 2/2 and see that you already did :) ok haha thanks!
>
> Stop the loop once the ring is soft full, returning the pages already
> processed, or -ENOSPC when there are none, since a retry can't succeed
> until userspace harvests the ring. kvm_dirty_ring_check_request() fills
> in a KVM_RUN exit, so test the ring's state directly. The stub for
> !HAVE_KVM_DIRTY_RING is for s390, which has the ioctl but no ring.
>
> Fixes: bc1a5cd002116 ("KVM: Add KVM_PRE_FAULT_MEMORY vcpu ioctl to pre-populate guest memory")
> Cc: stable@vger.kernel.org
> Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Yikes, nasty. Thanks for addressing this!
LGTM so:
Reviewed-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
> ---
> Documentation/virt/kvm/api.rst | 9 +++++++--
> include/linux/kvm_dirty_ring.h | 6 ++++++
> virt/kvm/dirty_ring.c | 2 +-
> virt/kvm/kvm_main.c | 6 ++++++
> 4 files changed, 20 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
> index e95c9cda085d9..89eb6be9bc6e3 100644
> --- a/Documentation/virt/kvm/api.rst
> +++ b/Documentation/virt/kvm/api.rst
> @@ -6544,6 +6544,7 @@ Errors:
> ENOENT The specified `gpa` is outside defined memslots.
> ENOEXEC The vCPU has not been initialised (arm64).
> EINTR An unmasked signal is pending and no page was processed.
> + ENOSPC The vCPU's dirty ring is full and no page was processed.
> EFAULT The parameter address was invalid.
> EHWPOISON A poisoned host page was encountered.
> EOPNOTSUPP Mapping memory for a GPA is unsupported by the
> @@ -6588,7 +6589,9 @@ case, the ioctl can be called in parallel.
>
> When the ioctl returns, the input values are updated to point to the
> remaining range. If `size` > 0 on return, the caller can just issue
> -the ioctl again with the same `struct kvm_map_memory` argument.
> +the ioctl again with the same `struct kvm_pre_fault_memory` argument.
> +If that fails with ENOSPC, the vCPU's dirty ring has to be harvested
> +and reset first.
>
> On x86, shadow page tables cannot support this ioctl because they
> are indexed by virtual address or nested guest physical address.
> @@ -8957,7 +8960,9 @@ Therefore, the ioctl must be called *before* reading the content of
> the dirty pages.
>
> The dirty ring can get full. When it happens, the KVM_RUN of the
> -vcpu will return with exit reason KVM_EXIT_DIRTY_RING_FULL.
> +vcpu will return with exit reason KVM_EXIT_DIRTY_RING_FULL, and
> +KVM_PRE_FAULT_MEMORY on the vcpu will process no more pages until the
> +ring has been harvested and reset.
>
> The dirty ring interface has a major difference comparing to the
> KVM_GET_DIRTY_LOG interface in that, when reading the dirty ring from
> diff --git a/include/linux/kvm_dirty_ring.h b/include/linux/kvm_dirty_ring.h
> index eb10d87adf7d5..88b4f2a009274 100644
> --- a/include/linux/kvm_dirty_ring.h
> +++ b/include/linux/kvm_dirty_ring.h
> @@ -60,6 +60,11 @@ static inline void kvm_dirty_ring_push(struct kvm_vcpu *vcpu,
> {
> }
>
> +static inline bool kvm_dirty_ring_soft_full(struct kvm_dirty_ring *ring)
> +{
> + return false;
> +}
> +
> static inline struct page *kvm_dirty_ring_get_page(struct kvm_dirty_ring *ring,
> u32 offset)
> {
> @@ -81,6 +86,7 @@ int kvm_dirty_ring_alloc(struct kvm *kvm, struct kvm_dirty_ring *ring,
> int kvm_dirty_ring_reset(struct kvm *kvm, struct kvm_dirty_ring *ring,
> int *nr_entries_reset);
> void kvm_dirty_ring_push(struct kvm_vcpu *vcpu, u32 slot, u64 offset);
> +bool kvm_dirty_ring_soft_full(struct kvm_dirty_ring *ring);
>
> bool kvm_dirty_ring_check_request(struct kvm_vcpu *vcpu);
>
> diff --git a/virt/kvm/dirty_ring.c b/virt/kvm/dirty_ring.c
> index 572b854edf740..f73f92102cb7a 100644
> --- a/virt/kvm/dirty_ring.c
> +++ b/virt/kvm/dirty_ring.c
> @@ -40,7 +40,7 @@ static u32 kvm_dirty_ring_used(struct kvm_dirty_ring *ring)
> return READ_ONCE(ring->dirty_index) - READ_ONCE(ring->reset_index);
> }
>
> -static bool kvm_dirty_ring_soft_full(struct kvm_dirty_ring *ring)
> +bool kvm_dirty_ring_soft_full(struct kvm_dirty_ring *ring)
> {
> return kvm_dirty_ring_used(ring) >= ring->soft_limit;
> }
> diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
> index cf4cb586f1407..da1b76ceb65e3 100644
> --- a/virt/kvm/kvm_main.c
> +++ b/virt/kvm/kvm_main.c
> @@ -4461,6 +4461,12 @@ static int kvm_vcpu_pre_fault_memory(struct kvm_vcpu *vcpu,
> break;
> }
>
> + /* Like KVM_RUN: only the iteration crossing the soft limit uses the reserve. */
> + if (vcpu->kvm->dirty_ring_size && kvm_dirty_ring_soft_full(&vcpu->dirty_ring)) {
> + r = -ENOSPC;
> + break;
> + }
> +
> r = kvm_arch_vcpu_pre_fault_memory(vcpu, range);
> if (WARN_ON_ONCE(r == 0 || r == -EIO))
> break;
> --
> 2.47.3
>
--
Cheers, Lorenzo
next prev parent reply other threads:[~2026-11-10 14:22 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-10 11:07 [PATCH 0/2] KVM: Bound KVM_PRE_FAULT_MEMORY by the vCPU's dirty ring Fuad Tabba
2026-11-10 11:07 ` [PATCH 1/2] KVM: Stop KVM_PRE_FAULT_MEMORY when the vCPU's dirty ring is full Fuad Tabba
2026-11-10 14:22 ` Lorenzo Stoakes (ARM) [this message]
2026-11-10 15:48 ` Sean Christopherson
2026-11-10 11:07 ` [PATCH 2/2] KVM: selftests: Test KVM_PRE_FAULT_MEMORY against a full dirty ring Fuad Tabba
2026-11-10 14:38 ` Lorenzo Stoakes (ARM)
2026-11-10 15:37 ` Fuad Tabba
2026-11-10 15:53 ` Sean Christopherson
2026-11-10 16:02 ` Lorenzo Stoakes (ARM)
2026-11-10 15:57 ` Lorenzo Stoakes (ARM)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=avMiLt3ZXjYesS3X@gremlin \
--to=ljs@kernel.org \
--cc=corbet@lwn.net \
--cc=fuad.tabba@linux.dev \
--cc=isaku.yamahata@intel.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=maz@kernel.org \
--cc=oliver.upton@linux.dev \
--cc=pbonzini@redhat.com \
--cc=rick.p.edgecombe@intel.com \
--cc=seanjc@google.com \
--cc=skhan@linuxfoundation.org \
--cc=stable@vger.kernel.org \
--cc=tabba@google.com \
--cc=weilin.chang@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®