mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mike Rapoport <rppt@kernel.org>
To: Li Zhe <lizhe.67@bytedance.com>
Cc: akpm@linux-foundation.org, apopple@nvidia.com,
	balbirs@nvidia.com, david@kernel.org, muchun.song@linux.dev,
	osalvador@suse.de, linux-kernel@vger.kernel.org,
	linux-mm@kvack.org
Subject: Re: [PATCH v2 0/2] mm: optimize HugeTLB bootmem hugepage init
Date: Wed, 11 Nov 2026 10:12:30 +0200	[thread overview]
Message-ID: <avQjbt-QUp-W3_9v@kernel.org> (raw)
In-Reply-To: <20261110114859.76343-1-lizhe.67@bytedance.com>

Hi,

On Tue, Nov 10, 2026 at 07:48:57PM +0800, Li Zhe wrote:
> This series speeds up the fallback initialization path for HugeTLB tail
> struct pages during boot-time hugepage allocation, when HugeTLB vmemmap
> optimization (HVO) is unavailable or fails.
> 
> Patch 1 factors the existing ZONE_DEVICE template-copy operation into
> memmap_init_page_from_template().
> 
> Patch 2 reuses that helper in hugetlb_folio_init_tail_vmemmap():
> initialize the first tail page normally, copy it into a local template,
> then initialize the remaining tail pages by refreshing only PFN-dependent
> fields before copying the template.
> 
> In the earlier discussion, Mike asked whether the same kind of
> template-based initialization also helps the ordinary struct page
> initialization path:
> 
> https://lore.kernel.org/all/akfB6Qe-jKDEMUxz@kernel.org/
> 
> I tested that direction as well, but did not see a measurable benefit
> for ordinary struct page initialization. The measurable improvement I
> could find is in the HugeTLB bootmem hugepage tail path, where gigantic
> pages can require initializing a large number of tail struct pages when
> HVO does not cover the allocation.
> 
> Tested on an arm64 QEMU/KVM guest with 4K base pages and 64 boot-time 1G
> hugepages. HVO is unavailable on arm64 in v7.4-rc1, so the fallback tail
> initialization path is exercised.
> 
> Results averaged over five boots, measured with a temporary
> jiffies-based printk:
> 
>   base (v7.4-rc1):  318.4 ms
>   with this patch:  202.4 ms

Are there numbers for x86 without HVO as well?
We need to be sure this does not regress that use case.
 
> This is a 36.43% reduction in the measured fallback tail initialization
> time. The temporary measurement instrumentation is not part of this
> series.
> 
> Li Zhe (2):
>   mm/mm_init: factor out memmap_init_page_from_template()
>   mm/hugetlb: optimize bootmem hugepage tail vmemmap init
> 
>  mm/hugetlb.c | 20 +++++++++++++++-----
>  mm/mm_init.c | 34 ++++++++++++++++++++--------------
>  mm/mm_init.h |  2 ++
>  3 files changed, 37 insertions(+), 19 deletions(-)
> 
> ---
> v1: https://lore.kernel.org/all/20261105120615.16817-1-lizhe.67@bytedance.com/#t
> 
> Changes in v2:
> - Add a comment for the template-before-copy ordering, as suggested by
>   Muchun Song.
> - Drop the empty-range guard in hugetlb_folio_init_tail_vmemmap()
>   as suggested by Balbir Singh and Mike Rapoport; current callers are
>   expected to pass a non-empty range.
> 
> -- 
> 2.20.1

-- 
Sincerely yours,
Mike.

      parent reply	other threads:[~2026-11-11  8:12 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-10 11:48 Li Zhe
2026-11-10 11:48 ` [PATCH v2 1/2] mm/mm_init: factor out memmap_init_page_from_template() Li Zhe
2026-11-11  7:58   ` Muchun Song
2026-11-10 11:48 ` [PATCH v2 2/2] mm/hugetlb: optimize bootmem hugepage tail vmemmap init Li Zhe
2026-11-11  8:12 ` Mike Rapoport [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=avQjbt-QUp-W3_9v@kernel.org \
    --to=rppt@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=apopple@nvidia.com \
    --cc=balbirs@nvidia.com \
    --cc=david@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=lizhe.67@bytedance.com \
    --cc=muchun.song@linux.dev \
    --cc=osalvador@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®