mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andrea della Porta <andrea.porta@suse.com>
To: Xiaolei Wang <wangxiaolei01@kaihong.com>
Cc: linusw@kernel.org, florian.fainelli@broadcom.com,
	rjui@broadcom.com, sbranden@broadcom.com,
	bcm-kernel-feedback-list@broadcom.com, daniel@dragonzap.com,
	iivanov@suse.de, andrea.porta@suse.com, phil@raspberrypi.com,
	linux-gpio@vger.kernel.org, linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Jonathan Bell <jonathan@raspberrypi.com>,
	stable@vger.kernel.org
Subject: Re: [PATCH v2 1/4] pinctrl: bcm: Fix off-by-one and out-of-bounds access in fsel_get()
Date: Fri, 13 Nov 2026 13:52:34 +0100	[thread overview]
Message-ID: <avcIEnCThuTHeWVv@apocalypse> (raw)
In-Reply-To: <20261113053221.3131068-2-wangxiaolei01@kaihong.com>

Hi Wang,

On 05:32 Fri 13 Nov     , Xiaolei Wang wrote:
> The FSEL field is a 1-based function number: 0 means GPIO, 1..n_funcs
> map to funcs[0..n_funcs - 1], and n_funcs + 1 and above are rejected.
> brcmstb_pinctrl_fsel_get() indexes funcs[] with the raw value instead
> of subtracting one, so readbacks are shifted by one slot: value 8
> indexes funcs[8], past the array end, while 0 is reported as funcs[0]
> instead of GPIO. The setter programs the mux correctly, so only the
> debugfs readback is affected.
> 
> Map 0 and out-of-range values back to GPIO, warn on the latter, and
> index funcs[] with fsel - 1. Tested on Raspberry Pi 5 with KASAN: the
> "alt8" readback no longer splats, and field 0 reports GPIO.
> 
> Fixes: 657cbf9b24ba ("pinctrl: bcm: Add STB family pin controller driver")
> Cc: Jonathan Bell <jonathan@raspberrypi.com>
> Cc: Phil Elwell <phil@raspberrypi.com>
> Cc: stable@vger.kernel.org
> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
> Signed-off-by: Xiaolei Wang <wangxiaolei01@kaihong.com>

Reviewed-by: Andrea della Porta <andrea.porta@suse.com>

Thanks!
Andrea

> ---
>  drivers/pinctrl/bcm/pinctrl-brcmstb.c | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pinctrl/bcm/pinctrl-brcmstb.c b/drivers/pinctrl/bcm/pinctrl-brcmstb.c
> index f46b27155c3c..2b942ca7196b 100644
> --- a/drivers/pinctrl/bcm/pinctrl-brcmstb.c
> +++ b/drivers/pinctrl/bcm/pinctrl-brcmstb.c
> @@ -66,7 +66,16 @@ static unsigned int brcmstb_pinctrl_fsel_get(struct brcmstb_pinctrl *pc,
>  
>  	val = readl(pc->base + BIT_TO_REG(bit));
>  	fsel = (val >> BIT_TO_SHIFT(bit)) & pc->pin_funcs[pin].func_mask;
> -	func = pc->pin_funcs[pin].funcs[fsel];
> +
> +	if (!fsel)
> +		return pc->func_gpio;
> +
> +	if (fsel > pc->pin_funcs[pin].n_funcs) {
> +		dev_warn(pc->dev, "invalid fsel %d for pin %u\n", fsel, pin);
> +		return pc->func_gpio;
> +	}
> +
> +	func = pc->pin_funcs[pin].funcs[fsel - 1];
>  
>  	if (func >= pc->func_count)
>  		func = fsel;
> -- 
> 2.34.1
> 

  reply	other threads:[~2026-11-13 12:48 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-13  5:32 [PATCH v2 0/4] pinctrl: bcm: Two bounds fixes and a dt_free_map cleanup Xiaolei Wang
2026-11-13  5:32 ` [PATCH v2 1/4] pinctrl: bcm: Fix off-by-one and out-of-bounds access in fsel_get() Xiaolei Wang
2026-11-13 12:52   ` Andrea della Porta [this message]
2026-11-13  5:32 ` [PATCH v2 2/4] pinctrl: bcm: Use pinconf_generic_dt_free_map in bcm2835 Xiaolei Wang
2026-11-13  5:32 ` [PATCH v2 3/4] pinctrl: bcm: Use pinconf_generic_dt_free_map in brcmstb Xiaolei Wang
2026-11-13  5:32 ` [PATCH v2 4/4] pinctrl: bcm: Add missing SGPIO entries to the BCM2712 AON tables Xiaolei Wang
2026-11-13 12:53   ` Andrea della Porta
2026-11-13 13:12 ` [PATCH v2 0/4] pinctrl: bcm: Two bounds fixes and a dt_free_map cleanup Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=avcIEnCThuTHeWVv@apocalypse \
    --to=andrea.porta@suse.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=daniel@dragonzap.com \
    --cc=florian.fainelli@broadcom.com \
    --cc=iivanov@suse.de \
    --cc=jonathan@raspberrypi.com \
    --cc=linusw@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=phil@raspberrypi.com \
    --cc=rjui@broadcom.com \
    --cc=sbranden@broadcom.com \
    --cc=stable@vger.kernel.org \
    --cc=wangxiaolei01@kaihong.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®