From: "Lorenzo Stoakes (ARM)" <ljs@kernel.org>
To: "Carlos López" <clopez@suse.de>
Cc: kvm@vger.kernel.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org, linux-s390@vger.kernel.org,
linux-riscv@lists.infradead.org, seanjc@google.com,
pbonzini@redhat.com, akpm@linux-foundation.org,
david@kernel.org, peterx@redhat.com, imbrenda@linux.ibm.com,
borntraeger@linux.ibm.com, frankja@linux.ibm.com,
"Liam R. Howlett" <liam@infradead.org>,
Vlastimil Babka <vbabka@kernel.org>,
Mike Rapoport <rppt@kernel.org>,
Suren Baghdasaryan <surenb@google.com>,
Michal Hocko <mhocko@suse.com>, Zi Yan <ziy@nvidia.com>,
Baolin Wang <baolin.wang@linux.alibaba.com>,
Nico Pache <nico.pache@linux.dev>,
Ryan Roberts <ryan.roberts@arm.com>, Dev Jain <dev.jain@arm.com>,
Barry Song <baohua@kernel.org>,
Lance Yang <lance.yang@linux.dev>,
Usama Arif <usama.arif@linux.dev>,
Kiryl Shutsemau <kas@kernel.org>
Subject: Re: [PATCH v3 3/9] mm/huge_memory: honor MM_CP_TRY_CHANGE_WRITABLE in change_huge_pud()
Date: Fri, 13 Nov 2026 20:48:34 +0000 [thread overview]
Message-ID: <avd0Cexmmu7kCN45@gremlin> (raw)
In-Reply-To: <20261112142039.907090-5-clopez@suse.de>
On Thu, Nov 12, 2026 at 03:20:32PM +0100, Carlos López wrote:
> change_protection() applies vma->vm_page_prot, which lacks the write bit
> for CoW and write-notified mappings. MM_CP_TRY_CHANGE_WRITABLE makes
> entries writable again if a write fault would only set the write bit.
>
> However, change_huge_pud() ignores the flag. For example, device DAX
> mappings are write-notified once soft-dirty tracking is armed through
> /proc/pid/clear_refs, and a protection change then leaves dirty PUDs
> read-only, so the next write to each of them faults.
>
> Fix this by adding can_change_pud_writable(), based on
> can_change_pmd_writable(). It omits the NUMA and uffd-wp checks, as
> change_huge_pud() bails out on those changes.
>
> Signed-off-by: Carlos López <clopez@suse.de>
Is this a real problem that actual people have had?
The why of all this is still eluding me, especially for THP PUD...
> ---
> include/linux/pgtable.h | 5 +++++
> mm/huge_memory.c | 28 +++++++++++++++++++++++++++-
> 2 files changed, 32 insertions(+), 1 deletion(-)
>
> diff --git a/include/linux/pgtable.h b/include/linux/pgtable.h
> index 780fe849ff8b..943d7e95f426 100644
> --- a/include/linux/pgtable.h
> +++ b/include/linux/pgtable.h
> @@ -1866,6 +1866,11 @@ static inline int pmd_soft_dirty(pmd_t pmd)
> return 0;
> }
>
> +static inline int pud_soft_dirty(pud_t pud)
> +{
> + return 0;
> +}
> +
> static inline pte_t pte_mksoft_dirty(pte_t pte)
> {
> return pte;
> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> index eb913acb03b7..080b718eb7de 100644
> --- a/mm/huge_memory.c
> +++ b/mm/huge_memory.c
> @@ -2833,6 +2833,29 @@ int change_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma,
> return ret;
> }
>
> +#ifdef CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
> +static inline bool can_change_pud_writable(struct vm_area_struct *vma,
> + unsigned long addr, pud_t pud)
> +{
> + struct page *page;
> +
> + if (WARN_ON_ONCE(!(vma->vm_flags & VM_WRITE)))
> + return false;
> +
> + /* Do we need write faults for softdirty tracking? */
> + if (vma_soft_dirty_enabled(vma) && !pud_soft_dirty(pud))
> + return false;
> +
> + if (!(vma->vm_flags & VM_SHARED)) {
This is getting annoying now, you're seemingly _knowingly_ writing deprecated
VMA flag API code on purpose.
> + /* See can_change_pte_writable(). */
> + page = vm_normal_page_pud(vma, addr, pud);
> + return page && PageAnon(page) && PageAnonExclusive(page);
> + }
> +
> + /* See can_change_pte_writable(). */
> + return pud_dirty(pud);
> +}
> +
> /*
> * Returns:
> *
> @@ -2840,7 +2863,6 @@ int change_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma,
> * - 1: if pud can be skipped
> * - HPAGE_PUD_NR: if pud was successfully processed
> */
> -#ifdef CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
> int change_huge_pud(struct mmu_gather *tlb, struct vm_area_struct *vma,
> pud_t *pudp, unsigned long addr, pgprot_t newprot,
> unsigned long cp_flags)
> @@ -2872,6 +2894,10 @@ int change_huge_pud(struct mmu_gather *tlb, struct vm_area_struct *vma,
> */
> oldpud = pudp_invalidate(vma, addr, pudp);
> entry = pud_modify(oldpud, newprot);
> + /* See change_pte_range(). */
> + if ((cp_flags & MM_CP_TRY_CHANGE_WRITABLE) && !pud_write(entry) &&
> + can_change_pud_writable(vma, addr, entry))
> + entry = pud_mkwrite(entry);
> set_pud_at(mm, addr, pudp, entry);
> tlb_flush_pud_range(tlb, addr, HPAGE_PUD_SIZE);
>
> --
> 2.51.0
>
--
Cheers, Lorenzo
next prev parent reply other threads:[~2026-11-13 20:48 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-12 14:20 [PATCH v3 0/9] KVM: don't zap secondary MMU on permission upgrade Carlos López
2026-11-12 14:20 ` [PATCH v3 1/9] mm: fix eager write-bit restore for write-notified shared mappings Carlos López
2026-11-13 20:47 ` Lorenzo Stoakes (ARM)
2026-11-12 14:20 ` [PATCH v3 2/9] riscv: mm: add pud_soft_dirty() Carlos López
2026-11-12 14:20 ` [PATCH v3 3/9] mm/huge_memory: honor MM_CP_TRY_CHANGE_WRITABLE in change_huge_pud() Carlos López
2026-11-13 18:58 ` David Hildenbrand (Arm)
2026-11-13 20:48 ` Lorenzo Stoakes (ARM) [this message]
2026-11-12 14:20 ` [PATCH v3 4/9] mm: keep writable entries writable on protection changes Carlos López
2026-11-13 18:56 ` David Hildenbrand (Arm)
2026-11-12 14:20 ` [PATCH v3 5/9] mm/mprotect: add MM_CP_PERM_UPGRADE Carlos López
2026-11-13 18:51 ` David Hildenbrand (Arm)
2026-11-13 20:37 ` Lorenzo Stoakes (ARM)
2026-11-12 14:20 ` [PATCH v3 6/9] mm/mmu_notifier: add MMU_NOTIFIER_RANGE_PERM_UPGRADE Carlos López
2026-11-12 14:20 ` [PATCH v3 7/9] KVM: pass the mmu_notifier event and flags to kvm_gfn_range Carlos López
2026-11-12 14:20 ` [PATCH v3 8/9] KVM: x86/mmu: don't zap secondary MMU on permission upgrade Carlos López
2026-11-12 14:20 ` [PATCH v3 9/9] KVM: s390: don't unmap the gmap " Carlos López
2026-11-13 19:00 ` [PATCH v3 0/9] KVM: don't zap secondary MMU " David Hildenbrand (Arm)
2026-11-13 20:32 ` Lorenzo Stoakes (ARM)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=avd0Cexmmu7kCN45@gremlin \
--to=ljs@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=baohua@kernel.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=borntraeger@linux.ibm.com \
--cc=clopez@suse.de \
--cc=david@kernel.org \
--cc=dev.jain@arm.com \
--cc=frankja@linux.ibm.com \
--cc=imbrenda@linux.ibm.com \
--cc=kas@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=lance.yang@linux.dev \
--cc=liam@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-s390@vger.kernel.org \
--cc=mhocko@suse.com \
--cc=nico.pache@linux.dev \
--cc=pbonzini@redhat.com \
--cc=peterx@redhat.com \
--cc=rppt@kernel.org \
--cc=ryan.roberts@arm.com \
--cc=seanjc@google.com \
--cc=surenb@google.com \
--cc=usama.arif@linux.dev \
--cc=vbabka@kernel.org \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®