mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jarkko Sakkinen <jarkko@kernel.org>
To: Siddharth Chintamaneni <sidchintamaneni@gmail.com>
Cc: Peter Huewe <peterhuewe@gmx.de>, Jason Gunthorpe <jgg@ziepe.ca>,
	Sudeep Holla <sudeep.holla@kernel.org>,
	Yeoreum Yun <yeoreum.yun@arm.com>,
	Stuart Yoder <stuart.yoder@arm.com>,
	apais@microsoft.com, rlmenge@gmail.com,
	hargar@linux.microsoft.com, linux-integrity@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 3/4] tpm: tpm_tis: Use cached tpm2_acpi_start_method
Date: Sat, 14 Nov 2026 23:14:50 +0200	[thread overview]
Message-ID: <avjPSnd2nhnBpsfZ@kernel.org> (raw)
In-Reply-To: <20261114193434.117714-4-sidchintamaneni@gmail.com>

On Sat, Nov 14, 2026 at 07:34:33PM +0000, Siddharth Chintamaneni wrote:
> Use the cached tpm2_acpi_start_method value in check_acpi_tpm2() instead
> of mapping and unmapping the ACPI TPM2 table again during probe.
> 
> Signed-off-by: Siddharth Chintamaneni <sidchintamaneni@gmail.com>
> ---
>  drivers/char/tpm/tpm_tis.c | 18 +++++++-----------
>  1 file changed, 7 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
> index 6f8344894ea5..a6fb6f889e7d 100644
> --- a/drivers/char/tpm/tpm_tis.c
> +++ b/drivers/char/tpm/tpm_tis.c
> @@ -138,28 +138,24 @@ MODULE_DEVICE_TABLE(acpi, tpm_acpi_tbl);
>  static int check_acpi_tpm2(struct device *dev)



>  {
>  	const struct acpi_device_id *aid = acpi_match_device(tpm_acpi_tbl, dev);
> -	struct acpi_table_tpm2 *tbl;
> -	acpi_status st;
> -	int ret = 0;
>  
>  	if (!aid || aid->driver_data != DEVICE_IS_TPM2)
>  		return 0;
>  
> -	/* If the ACPI TPM2 signature is matched then a global ACPI_SIG_TPM2
> -	 * table is mandatory
> +	/*
> +	 * If the ACPI TPM2 signature is matched then a global ACPI_SIG_TPM2
> +	 * table is mandatory.
>  	 */

Delete this comment entirely. It has a low value.

> -	st = acpi_get_table(ACPI_SIG_TPM2, 1, (struct acpi_table_header **)&tbl);
> -	if (ACPI_FAILURE(st) || tbl->header.length < sizeof(*tbl)) {
> +	if (tpm2_acpi_start_method == ACPI_TPM2_NOT_ALLOWED) {
>  		dev_err(dev, FW_BUG "failed to get TPM2 ACPI table\n");

Delete dev_err()

>  		return -EINVAL;

-ENODEV

>  	}
>  
>  	/* The tpm2_crb driver handles this device */
> -	if (tbl->start_method != ACPI_TPM2_MEMORY_MAPPED)
> -		ret = -ENODEV;
> +	if (tpm2_acpi_start_method != ACPI_TPM2_MEMORY_MAPPED)
> +		return -ENODEV;
>  
> -	acpi_put_table((struct acpi_table_header *)tbl);
> -	return ret;
> +	return 0;
>  }
>  #else
>  static int check_acpi_tpm2(struct device *dev)
> -- 
> 2.45.4
> 


Finally after those suggestions this collapses into almost nothing i.e.,
please remove check_acpi_tpm2 entirely and open-code to the two call
sites.

Br, Jarkko

  reply	other threads:[~2026-11-14 21:14 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-14 19:34 [PATCH v2 0/4] tpm: Cache ACPI TPM2 start method and gate tpm_crb_ffa probe Siddharth Chintamaneni
2026-11-14 19:34 ` [PATCH v2 1/4] tpm: Cache TPM2 start method Siddharth Chintamaneni
2026-11-14 20:54   ` Jarkko Sakkinen
2026-11-14 21:00   ` Jarkko Sakkinen
2026-11-14 19:34 ` [PATCH v2 2/4] tpm: tpm_crb_ffa: Only probe when ACPI TPM2 uses FF-A Siddharth Chintamaneni
2026-11-14 19:34 ` [PATCH v2 3/4] tpm: tpm_tis: Use cached tpm2_acpi_start_method Siddharth Chintamaneni
2026-11-14 21:14   ` Jarkko Sakkinen [this message]
2026-11-14 19:34 ` [PATCH v2 4/4] tpm: tpm_crb: " Siddharth Chintamaneni
2026-11-14 21:11   ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=avjPSnd2nhnBpsfZ@kernel.org \
    --to=jarkko@kernel.org \
    --cc=apais@microsoft.com \
    --cc=hargar@linux.microsoft.com \
    --cc=jgg@ziepe.ca \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peterhuewe@gmx.de \
    --cc=rlmenge@gmail.com \
    --cc=sidchintamaneni@gmail.com \
    --cc=stuart.yoder@arm.com \
    --cc=sudeep.holla@kernel.org \
    --cc=yeoreum.yun@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®