From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Shivendra Pratap <shivendra.pratap@oss.qualcomm.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>,
Arnd Bergmann <arnd@arndb.de>,
Bjorn Andersson <andersson@kernel.org>,
Rob Herring <robh@kernel.org>,
Souvik Chakravarty <Souvik.Chakravarty@arm.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
Mark Rutland <mark.rutland@arm.com>,
Conor Dooley <conor+dt@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
John Stultz <john.stultz@linaro.org>,
Moritz Fischer <moritz.fischer@ettus.com>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Daniel Lezcano <daniel.lezcano@kernel.org>,
Christian Loehle <christian.loehle@arm.com>,
Lee Jones <lee@kernel.org>, Ulf Hansson <ulfh@kernel.org>,
Pavan Kondeti <pavan.kondeti@oss.qualcomm.com>,
Abel Vesa <abelvesa@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
Sudeep Holla <sudeep.holla@kernel.org>,
Andy Yan <andyshrk@163.com>,
Florian Fainelli <florian.fainelli@broadcom.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>,
Andre Draszik <andre.draszik@linaro.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Kathiravan Thirumoorthy
<kathiravan.thirumoorthy@oss.qualcomm.com>,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
Srinivas Kandagatla <srini@kernel.org>,
Ulf Hansson <ulf.hansson@oss.qualcomm.com>,
Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Subject: Re: [PATCH v27 06/10] power: reset: Add psci-reboot-mode driver
Date: Mon, 16 Nov 2026 00:08:05 +0100 [thread overview]
Message-ID: <avo65hxiVDxpJRn-@venus> (raw)
In-Reply-To: <20261029-arm-psci-system_reset2-vendor-reboots-v27-6-fa4b3ff1359b@oss.qualcomm.com>
[-- Attachment #1: Type: text/plain, Size: 7666 bytes --]
Hi,
On Thu, Oct 29, 2026 at 02:31:00PM +0530, Shivendra Pratap wrote:
> PSCI supports different types of resets like SYSTEM_RESET, SYSTEM_RESET2
> ARCH WARM reset and SYSTEM_RESET2 vendor-specific resets. Currently
> there is no common driver that handles all supported psci resets at one
> place. Additionally, there is no common mechanism to issue the supported
> psci resets from userspace.
>
> Add psci-reboot-mode as an auxiliary device created by the psci-devices
> driver. Define two types of PSCI resets, predefined-resets and
> vendor-specific resets. Predefined-resets are defined by psci driver
> and vendor-specific resets are defined by SoC vendors, under the
> psci:reboot-mode node of SoC device tree.
>
> Register the driver with the reboot-mode framework to interface these
> resets to userspace. When userspace initiates a supported command, pass
> the reset arguments to the PSCI driver to enable command-based reset.
>
> This change allows userspace to issue supported PSCI reset commands
> using the standard reboot system calls while enabling SoC vendors to
> define their specific resets for PSCI.
>
> Suggested-by: Ulf Hansson <ulf.hansson@oss.qualcomm.com>
> Suggested-by: Lee Jones <lee@kernel.org>
> Suggested-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
> Signed-off-by: Shivendra Pratap <shivendra.pratap@oss.qualcomm.com>
> ---
> MAINTAINERS | 1 +
> drivers/firmware/psci/psci-devices.c | 4 ++
> drivers/power/reset/Kconfig | 11 ++++
> drivers/power/reset/Makefile | 1 +
> drivers/power/reset/psci-reboot-mode.c | 101 +++++++++++++++++++++++++++++++++
> 5 files changed, 118 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e4ca41cdd872..0e03826eec48 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -22292,6 +22292,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> S: Maintained
> F: Documentation/devicetree/bindings/arm/psci.yaml
> F: drivers/firmware/psci/
> +F: drivers/power/reset/psci-reboot-mode.c
> F: include/linux/psci.h
> F: include/uapi/linux/psci.h
>
> diff --git a/drivers/firmware/psci/psci-devices.c b/drivers/firmware/psci/psci-devices.c
> index d23befc490ed..04f24b8d9943 100644
> --- a/drivers/firmware/psci/psci-devices.c
> +++ b/drivers/firmware/psci/psci-devices.c
> @@ -20,6 +20,10 @@ static const struct arm_psci_device_info arm_psci_devices[] = {
> {
> .name = "psci-cpuidle-domain",
> },
> + {
> + .name = "psci-reboot-mode",
> + .of_node_name = "reboot-mode",
> + },
> };
>
> static void arm_psci_auxiliary_device_release(struct device *dev)
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index bce996bbef28..f165a41d40ed 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -360,6 +360,17 @@ config NVMEM_REBOOT_MODE
> then the bootloader can read it and take different
> action according to the mode.
>
> +config PSCI_REBOOT_MODE
> + bool "PSCI reboot mode driver"
> + depends on ARM_PSCI_DEVICES
> + select AUXILIARY_BUS
> + select REBOOT_MODE
> + help
> + Say y here to enable the PSCI reboot mode driver. The driver
> + registers with the reboot-mode framework to configure PSCI
> + reset commands, which are executed by the PSCI driver during
> + psci_sys_reset().
> +
> config POWER_MLXBF
> tristate "Mellanox BlueField power handling driver"
> depends on (GPIO_MLXBF2 || GPIO_MLXBF3) && ACPI
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index e31cab4ba78e..45d8aaaffaa1 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -41,5 +41,6 @@ obj-$(CONFIG_REBOOT_MODE) += reboot-mode.o
> obj-$(CONFIG_SYSCON_REBOOT_MODE) += syscon-reboot-mode.o
> obj-$(CONFIG_POWER_RESET_SC27XX) += sc27xx-poweroff.o
> obj-$(CONFIG_NVMEM_REBOOT_MODE) += nvmem-reboot-mode.o
> +obj-$(CONFIG_PSCI_REBOOT_MODE) += psci-reboot-mode.o
> obj-$(CONFIG_POWER_MLXBF) += pwr-mlxbf.o
> obj-$(CONFIG_POWER_RESET_QEMU_VIRT_CTRL) += qemu-virt-ctrl.o
> diff --git a/drivers/power/reset/psci-reboot-mode.c b/drivers/power/reset/psci-reboot-mode.c
> new file mode 100644
> index 000000000000..c5dcfc40392a
> --- /dev/null
> +++ b/drivers/power/reset/psci-reboot-mode.c
> @@ -0,0 +1,101 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
> + */
> +
> +#include <linux/array_size.h>
> +#include <linux/auxiliary_bus.h>
> +#include <linux/device.h>
> +#include <linux/module.h>
> +#include <linux/psci.h>
> +#include <linux/reboot-mode.h>
> +#include <linux/slab.h>
> +#include <linux/types.h>
> +
> +/*
> + * Predefined modes use two arguments. arg1/magic[0] is always zero and
> + * arg2/magic[1] is one of the values defined by enum psci_standard_resets.
> + */
> +static const struct reboot_mode_entry psci_resets[] = {
> + {
> + .name = "psci-system-reset",
> + .magic = { 0, PSCI_SYSTEM_RESET_COLD_RESET },
> + .count = 2,
> + },
> + {
> + .name = "psci-system-reset2-arch-warm-reset",
> + .magic = { 0, PSCI_SYSTEM_RESET2_ARCH_WARM_RESET },
> + .count = 2,
> + },
> +};
> +
> +static u64 psci_reboot_mode_get_cookie(const u32 *magic, int count)
> +{
> + u64 cookie = 0;
> + int i;
> +
> + /*
> + * For a 3-cell magic, arg2 is the high 32 bits and arg3 is the low 32 bits.
> + * For a 2-cell magic, arg2 is the low 32 bits.
> + */
> + for (i = 1; i < count; i++)
> + cookie = (cookie << 32) | magic[i];
> +
> + return cookie;
> +}
> +
> +static int psci_reboot_mode_write(struct reboot_mode_driver *reboot,
> + const u32 *magic, u32 count)
> +{
> + if (count < 2 || count > 3)
> + return -EINVAL;
> +
> + /* Unexpected value at magic[1]/arg2 on a 32-bit system. */
> + if (!IS_ENABLED(CONFIG_64BIT) && count == 3 && magic[1])
> + return -EINVAL;
> +
> + return psci_set_reset_cmd(magic[0],
> + psci_reboot_mode_get_cookie(magic, count));
> +}
> +
> +static int psci_reboot_mode_probe(struct auxiliary_device *auxdev,
> + const struct auxiliary_device_id *id)
> +{
> + struct reboot_mode_driver *reboot;
> + struct device *dev = &auxdev->dev;
> + size_t count;
> + int ret;
> +
> + reboot = devm_kzalloc(dev, sizeof(*reboot), GFP_KERNEL);
> + if (!reboot)
> + return -ENOMEM;
reboot = devm_kzalloc_obj(dev, *reboot);
Otherwise:
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> + /* Skip PSCI SYSTEM_RESET2 modes if unsupported. */
> + count = psci_has_system_reset2_support() ? ARRAY_SIZE(psci_resets) : 1;
> +
> + ret = reboot_mode_driver_init(reboot, dev, NULL,
> + psci_reboot_mode_write, psci_resets,
> + count);
> + if (ret)
> + return ret;
> +
> + return devm_reboot_mode_register(dev, reboot);
> +}
> +
> +static const struct auxiliary_device_id psci_reboot_mode_id_table[] = {
> + { .name = "arm-psci.psci-reboot-mode" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(auxiliary, psci_reboot_mode_id_table);
> +
> +static struct auxiliary_driver psci_reboot_mode_driver = {
> + .probe = psci_reboot_mode_probe,
> + .id_table = psci_reboot_mode_id_table,
> +};
> +
> +static int __init psci_reboot_mode_init(void)
> +{
> + return __auxiliary_driver_register(&psci_reboot_mode_driver, THIS_MODULE,
> + "psci-reboot-mode");
> +}
> +subsys_initcall(psci_reboot_mode_init);
>
> --
> 2.34.1
>
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2026-11-16 6:03 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-29 9:00 [PATCH v27 00/10] Implement PSCI reboot mode driver for PSCI resets Shivendra Pratap
2026-10-29 9:00 ` [PATCH v27 01/10] power: reset: reboot-mode: Support up to 3 magic values per mode Shivendra Pratap
2026-11-15 23:08 ` Sebastian Reichel
2026-10-29 9:00 ` [PATCH v27 02/10] power: reset: reboot-mode: Add support for predefined reboot modes Shivendra Pratap
2026-11-15 23:13 ` Sebastian Reichel
2026-10-29 9:00 ` [PATCH v27 03/10] firmware: psci: Introduce command-based resets Shivendra Pratap
2026-10-29 9:00 ` [PATCH v27 04/10] firmware: psci: Add support for PSCI auxiliary devices Shivendra Pratap
2026-10-29 9:00 ` [PATCH v27 05/10] dt-bindings: arm: Document reboot mode magic Shivendra Pratap
2026-11-02 9:40 ` Bartosz Golaszewski
2026-10-29 9:01 ` [PATCH v27 06/10] power: reset: Add psci-reboot-mode driver Shivendra Pratap
2026-11-15 23:08 ` Sebastian Reichel [this message]
2026-10-29 9:01 ` [PATCH v27 07/10] arm64: dts: qcom: Add psci reboot-modes for kodiak boards Shivendra Pratap
2026-10-29 10:23 ` Abel Vesa
2026-10-29 9:01 ` [PATCH v27 08/10] arm64: dts: qcom: Add psci reboot-modes for lemans boards Shivendra Pratap
2026-10-29 10:23 ` Abel Vesa
2026-10-29 9:01 ` [PATCH v27 09/10] arm64: dts: qcom: Add psci reboot-modes for monaco boards Shivendra Pratap
2026-10-29 10:24 ` Abel Vesa
2026-10-29 9:01 ` [PATCH v27 10/10] arm64: dts: qcom: Add psci reboot-modes for talos boards Shivendra Pratap
2026-10-29 10:24 ` Abel Vesa
2026-11-09 15:47 ` [PATCH v27 00/10] Implement PSCI reboot mode driver for PSCI resets Ulf Hansson
2026-11-15 23:14 ` Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=avo65hxiVDxpJRn-@venus \
--to=sebastian.reichel@collabora.com \
--cc=Souvik.Chakravarty@arm.com \
--cc=abelvesa@kernel.org \
--cc=andersson@kernel.org \
--cc=andre.draszik@linaro.org \
--cc=andyshrk@163.com \
--cc=arnd@arndb.de \
--cc=bartosz.golaszewski@oss.qualcomm.com \
--cc=brgl@kernel.org \
--cc=christian.loehle@arm.com \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=florian.fainelli@broadcom.com \
--cc=gregkh@linuxfoundation.org \
--cc=john.stultz@linaro.org \
--cc=kathiravan.thirumoorthy@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=moritz.fischer@ettus.com \
--cc=mukesh.ojha@oss.qualcomm.com \
--cc=pavan.kondeti@oss.qualcomm.com \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=shivendra.pratap@oss.qualcomm.com \
--cc=srini@kernel.org \
--cc=sudeep.holla@kernel.org \
--cc=ulf.hansson@oss.qualcomm.com \
--cc=ulfh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®